Elastic wave propagation governs impulse enhancement in pulsed jets through flexible nozzles

Paras Singh, Daehyun Choi, Saad Bhamla, Chandan Bose · 2026

Read Elastic wave propagation governs impulse enhancement in pulsed jets through flexible nozzles by Paras Singh, Daehyun Choi, Saad Bhamla, Chandan Bose (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-17319.txt.

Introduction

Choi, Singh and colleagues model pulsed jets through passively flexible nozzles with three-dimensional fluid-structure simulations. Softer nozzles slow deformation waves, stretch the expansion phase and store elastic energy, then release it to boost jet acceleration and vortex strength. For the most flexible nozzle, vortex circulation rises 52 percent and total impulse 62 percent over a rigid nozzle. A lumped oscillator model predicts those outcomes within a few percent.

Catalog record

CREATORParas Singh, Daehyun Choi, Saad Bhamla, Chandan Bose
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29661
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.17319

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Elastic wave propagation governs impulse enhancement in pulsed jets through flexible nozzles Paras Singh, Daehyun Choi, Saad Bhamla, Chandan Bose Abstract Inspired by cephalopod jet propulsion through compliant funnels, this study investigates elastic wave propagation and energy exchange in passively deforming cylindrical nozzles through three-dimensional, two-way fluid–structure interaction simulations. Flexible nozzles with varying stiffness ( E ​ h = 75 − 500 ​ N ​ m − 1 Eh=75-500~\mathrm{N\,m^{-1}} , where E E and h h are Young’s modulus and nozzle thickness, respectively) are subjected to a pulsatile jet inflow at R ​ e ∼ 4000 Re\sim 4000 . Increasing nozzle flexibility reduces the deformation-wave speed in accordance with Moens–Korteweg scaling, thereby prolonging the nozzle expansion phase. This delayed expansion enhances jet entrainment and elastic energy storage while suppressing early shear-layer roll-up and vortex formation. During contraction, the stored elastic energy is released, thereby enhancing jet acceleration and vortex formation. For the most flexible nozzle, the primary vortex-ring circulation increases by 52.13%, the vortex convection distance by 9.00%, and the peak outlet kinetic energy flux by a factor of 4.62 compared with a rigid nozzle. These effects collectively yield a 61.92% increase in total hydrodynamic impulse. These findings identify passive wave-speed tuning via nozzle compliance as a mechanism to enhance pulsed-jet thrust for bio-inspired underwater propulsion. Keywords fluid-structure interaction \cdot flexible nozzles \cdot jet propulsion \cdot elastic wave propagation. 1 Introduction Pulsed jets, produced by the ejection of a finite volume of fluid with high momentum into a surrounding medium, are key to propulsion and fluid transport for many natural organisms. cephalopods, salps, and jellyfish achieve high propulsive efficiency by expelling pulsed jets ( 11 ; 6 ) . Furthermore, inspired by nature, pulsed jets have been exploited in various engineering systems for dynamic stall control ( 10 ) , enhancing heat transfer ( 1 ) , and augmenting the propulsive efficiency of underwater robots ( 2 ) . The pulsatile flows ejected from nozzles are dominated by the formation and evolution of vortex rings, which provide thrust through the combined effects of fluid momentum and pressure impulse at the nozzle or body exit ( 12 ) . In rigid nozzles, the generated impulse, composed of jet momentum and nozzle exit pressure contribution, depends on the jet generator (e.g., piston and impeller) and the nozzle geometry. However, in a flexible nozzle, coupled fluid–structure interaction (FSI) with the unsteady jet significantly affects the generated impulse and propulsive efficiency. The efficiency of such pulsed-jet propulsion has been linked to the ability of the compliant structure to interact dynamically with the surrounding fluid, a feature common in biological systems where flexibility and resonant deformation augment vortex formation and energy recovery ( 7 ; 14 ) . Recently, 13 experimentally demonstrated that flexible nozzles can generate multiple vortex rings via nozzle oscillations, with the pulsed jet generator tuned to specific formation lengths. When subjected to a pulsed jet, the flexible nozzle expands due to the positive pressure generated as the flow within it accelerates, producing an expansion wave that propagates along the nozzle. The wave bounces back when it reaches the nozzle exit, from which nozzle contraction begins. The time scale for these nozzle deformation phases (the time required for the expansion and contraction waves to travel) is determined by the wave speed (correlated with nozzle flexibility) and the nozzle length. 3 suggested that for a continuous jet input, the jet impulse is maximised when this time scale is tuned with the jet acceleration time, for maximising the jet velocity. In a subsequent study, 4 confirmed a similar effect with a single pulsed jet input condition. However, the relationship among wave propagation, vortex dynamics, and the subsequent energy transfer mechanism remains to be established. Building on the work of 4 , this study utilises numerical simulations to quantify the wave propagation and reflection, study its influence on the nozzle vortex dynamics and quantify the energy transfer mechanism (from nozzle elastic potential energy to jet kinetic energy) that leads to thrust enhancement from the flexible nozzles. To study this energy transfer mechanism, this study uses a simplified model of a flexible cylindrical nozzle that undergoes expansion and contraction due to jet acceleration and deceleration, respectively, thereby generating thrust. These insights could then be potentially used to enhance the propulsive performance of underwater vehicles. 2 Numerical method The schematic representation of the computational domain along with the associated boundary conditions is presented in figure 1 (a). The cylindrical nozzle of diameter D and length L is aligned axially along the x -axis, with the base fixed to the flow domain wall and the origin of the Cartesian coordinate system located at the centre point of the nozzle inlet. The fluid domain spans 20D along the x -axis, 8D along the y and z axes. An unstructured grid with tetrahedral elements (shown in figure 1 (b)) is adopted for discretising both the fluid and solid domains to maintain cell quality during mesh deformation around the flexible nozzle. To improve computational efficiency, refinement zones are created in which the grid cell size increases gradually with distance from the nozzle. A pulsatile jet profile with the peak velocity, v_{jet}=0.293~\mathrm{m\,s^{-1}} and jet acceleration time (defined as the time when jet velocity reaches v_{jet} ), T_{acc} = 0.05 s is used for the present study; see figure 1 (c). The inlet flow data is obtained from the experimental condition of 4 . The Reynolds number based on the nozzle diameter and peak jet velocity (defined as Re=v_{jet}D/\nu , where \nu is the kinematic viscosity of water) is kept at Re=3855 . The nozzle is modelled with a uniform wall thickness of h = 1 mm, and solid density \rho_{s}=1300~\mathrm{kg\,m^{-3}} corresponding to silicone rubber material. The Young’s modulus ( E ) is varied between 75 and 500 kPa with a constant Poisson’s ratio of 0.4. In the present study, jet propulsion through a flexible nozzle with structural stiffness Eh=75-500~\mathrm{N\,m^{-1}} is analysed and compared with a rigid nozzle ( Eh\to\infty ). The laminar and incompressible flow is simulated by solving the incompressible Navier-Stokes equations, projected in the arbitrary Lagrangian-Eulerian (ALE) framework, as given by \displaystyle\nabla\cdot\mathbf{v}_{f} \displaystyle=0, (1a) \displaystyle\frac{\partial\mathbf{v}_{f}}{\partial t}+\big[(\mathbf{v}_{f}-\mathbf{v}_{m})\cdot\nabla\big]\mathbf{v}_{f} \displaystyle=-\frac{1}{\rho}\nabla p+\nu\nabla^{2}\mathbf{v}_{f}. (1b) Here, \rho_{f} , \mu_{f} , and \mathbf{v}_{f} are the density, dynamic viscosity, and the velocity of the fluid, \mathbf{v}_{m} is the fluid grid point velocity, and p is the fluid pressure. The wave propagation dynamics of the elastic nozzle is governed by the structural momentum equation as given by (without any body force) \displaystyle\rho_{s}\frac{\partial^{2}\mathbf{d}_{s}}{\partial t^{2}}-\nabla\cdot\boldsymbol{\sigma}_{s}=0, (2) where \rho_{s} is the solid density, \mathbf{d}_{s} is the displacement of the solid, and \boldsymbol{\sigma}_{s} is the Cauchy stress tensor. For the present study, we have considered a linear-elastic stress-strain relationship: \boldsymbol{\sigma}_{s}=\lambda\,\mathrm{tr}(\boldsymbol{\varepsilon})\,\mathbf{I}+2\mu\,\boldsymbol{\varepsilon} and \boldsymbol{\varepsilon}=\tfrac{1}{2}\left(\nabla\mathbf{d}_{s}+(\nabla\mathbf{d}_{s})^{T}\right) , where \boldsymbol{\varepsilon} is the infinitesimal strain tensor, \mu and \lambda represent the shear modulus and the first Lamé parameter, respectively. The operator \mathrm{tr}(\cdot) denotes the trace of a tensor, \mathbf{I} is the second-order identity tensor. It is to be noted that the present linear-elastic results are also compared with those obtained considering a hyper-elastic relationship, and no significant deviation in the coupled structural response is observed. The interface conditions on the fluid-solid interface are given by \displaystyle\mathbf{v}_{f}=\mathbf{v}_{s}, (3a) \displaystyle\boldsymbol{\sigma}_{f}\cdot\mathbf{n}_{f}+\boldsymbol{\sigma}_{s}\cdot\mathbf{n}_{s}=\mathbf{0}, (3b)

Read the complete text