First-principles calculations of electrical conductivities of edge-modified graphene nanoribbons: strain effect
Sanjay Prabhakar 1 and Roderick Melnik 2 · 2026
Read First-principles calculations of electrical conductivities of edge-modified graphene nanoribbons: strain effect by Sanjay Prabhakar 1 and Roderick Melnik 2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-16965.txt.
Introduction
Prabhakar and Melnik calculate how strain affects electrical conductivity in edge-modified graphene nanoribbons. Pristine unstrained armchair ribbons with seven zigzag edges do not conduct, but strain makes them conductive across a wide energy range from infrared to visible to ultraviolet light. Boron-doped and vacancy variants are already metallic, showing non-vanishing conductivity across the same range with or without strain. Strain also shifts Berry curvature: fermions spread across the Brillouin zone in unstrained semiconducting ribbons but localise near the centre point when strained.
Catalog record
| CREATOR | Sanjay Prabhakar 1 and Roderick Melnik 2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39599 |
| LICENSE | http://creativecommons.org/publicdomain/zero/1.0/ |
| RIGHTS | CC0 |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.16965
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
First-principles calculations of electrical conductivities of edge-modified graphene nanoribbons: strain effect Sanjay Prabhakar 1 and Roderick Melnik 2 Abstract We investigate the influence of strain on the electrical properties of graphene nanoribbons that have potential applications in making sensors and other optoelectronic devices. In particular, we chose pristine armchair graphene nanoribbons with 7 zigzag edges (7aGNRsH), boron doped armchair graphene nanoribbons with 7 zigzag edges (7aGNRsH-B) and armchair graphene nanoribbons with 7 zigzag edges that have one carbon atom vacancy (7aGNRsH-V). Based on first-principles calculations, results show that pristine unstrained 7aGNRsH is electrically nonconductive but turns to be electrically conductive in a wide range of energy spectrum, e.g., from IR to visible to UV, due to the application of strain engineering. In metallic unstrained and strained 7aGNRsH-B and 7aGNRsH-V, non-vanishing electrical conductivity in the IR, visible and UV energy spectrum regimes are observed. We also investigate the influence of strain on the Berry curvature of 7aGNRsH, 7aGNRsH-B and 7aGNRsH-V nanoribbons. The results show that fermions are spread through out the Brillion zone in the reciprocal space for semiconducting unstrained 7aGNRsH but localized near the Γ \Gamma -point for strained 7aGNRsH that have out-of-plane deformations due to strain engineering. For metallics 7aGNRsH-B and 7aGNRsH-V, Berry curvature plots show that fermions are localized far away from the Γ \Gamma -point. In two atom boron doped p-type armchair graphene nanoribbons with 7 zigzag edges (7aGNRsH-2B), large peaks in electrical conductivity at IR energy spectrum regimes can be observed. These peaks of electrical conductivities in 7aGNRSH-2B may be detectable in experimentally synthesized structure in Reference, JACS 137, 8872 (2016). I Introduction Two dimensional materials, e.g., graphene and others, are of great interest for making optoelectronic and spintronic devices that run at much faster speed compared to conventional silicon and other conventional semiconductor devices because they possess extraordinary physical properties, e.g., the half integer quantum Hall effect, non-zero Berry curvature, high mobility charge carriers, and other unique properties Liu et al. 2020 ; Balents et al. 2020 ; Liu et al. 2021 ; Parker et al. 2021 ; Geim and Novoselov 2007 ; Coleman et al. 2011 ; Novoselov et al. 2005a ; Novoselov et al. 2005b ; Novoselov et al. 2004 ; Savage 2012 . In addition, experimental studies have shown that the optoelectronic devices made out of graphene have better performance over silicon devices of the same size Savage 2012 ; Novoselov et al. 2004 ; Liao et al. 2010 ; Aoki and Dresselhaus 2013 . Unfortunately, graphene has some drawbacks, e.g., the conduction and valence bands touch each other at the Dirac point. In other words, it contains no bandgaps and thus it may not have any application at the semiconductor device level. However, experimentalists have discovered some artificial way to create some bandgaps, e.g., strain engineering is one of them and thus can be utilized to make optoelectronic devices. Another methods to open bandgap in graphene is to implement spin-orbit coupling effect, magnetic fields or simply consider bilayer graphene and apply positive and negative voltages on the top and bottom layer Trauzettel et al. 2007 . In addition, devices made from armchair graphene nanoribbons possess a larger bandgap opening at \Gamma -point Han et al. 2007 ; Zhou et al. 2007 ; Xia et al. 2010 ; Chen et al. 2015 ; Ugeda et al. 2014 ; Brey and Fertig 2006 . Figure 1: Maximally localized wannier function (MLWF) of top of the valence bands for three different optimized structures: (a) 7aGNRsH (b) boron doped 7aGNRsH and (c) carbon vacancy created 7aGNRsH. Note that in (b) and (c), periodicity of boron atoms and ring-pentagon in the crystal lattice turns electrically inactive pristine 7aGNRsH from semiconducting into metallic that is electrically active in the wide range of energy spectrum, e.g., IR, visible and UV. For details see conductivity plots in Figs. ( 6 ) and ( 11 ). Figure 2: Side view of maximally localized wannier function of top of the valence band states of 7aGNRsH is shown in (a) and its band structures obtained from first-principles calculations using pw.x (black, open circles) and wanniwer90 (red line with dots) methods are shown in (b). As can be seen, band energies obtained from both methods are in excellent agreement. Also, density of states and quantum conductivity of 7aGNRsH are plotted in (c) and (d). Notice that forbidden bandgap shown in band structure calculation in (a) is also reflected in the density of states and quantum conductivity plots in (c) and (d) respectively. Figure 3: Side view of maximally localized wannier function of top of the valence band states of single boron atom doped 7aGNRsH is shown in (a) and its band structures obtained from first-principles calculations using pw.x (black, open circles) and wanniwer90 (red line with dots) methods are shown in (b). As can be seen, band energies obtained from both methods are in excellent agreement. Fermi-energy is set to be at 0 eV that is located below the top of the valence band. Also, density of states and quantum conductivity of 7aGNRsH are plotted in (c) and (d). Notice that forbidden bandgap shown in band structure calculation in (a) lies above the Fermi energy that is also reflected in the density of states and quantum conductivity plots in (c) and (d) respectively. Hence, 7aGNRsH-B acts like metallic. Figure 4: Side view of maximally localized wannier function of top of the valence band states of vacancy of single carbon atom in 7aGNRsH is shown in (a) and its band structures obtained from first-principles calculations using pw.x (black, open circles) and wanniwer90 (red line with dots) methods are shown in (b). As can be seen, band energies obtained from both methods are in excellent agreement. Fermi-energy is set to be at 0 eV that is located below the top of the valence band. Also, density of states and quantum conductivity of 7aGNRsH are plotted in (c) and (d). Notice that forbidden bandgap shown in band structure calculation in (a) lies above the Fermi energy that is also reflected in the density of states and quantum conductivity plots in (c) and (d) respectively. Hence, 7aGNRsH-V acts like a metallic structure. The electrical properties of graphene systems have attracted considerable interest for optoelectronic devices, especially to make sensors devices due to the extension of tunability of electrical conductivities in the wide range of optical energy spectrum regimes, e.g., from infrared to visible to UV light spectrum Mishchenko 2008 ; Wright et al. 2009 ; Zhang et al. 2008 ; Stauber et al. 2008 ; Cserti et al. 2007 ; Tan et al. 2021 ; Hipolito et al. 2019 ; Herrera and Naumis 2020 ; Van Tuan et al. 2016 ; De Filippis et al. 2014 . Recently there have been a lot of research publications on the properties of electrical conductivity of single and bilayer graphene Gallagher et al. 2019 ; Narozhny 2019 ; Li and Peeters 2019 ; Iurov et al. 2018 . When the fermi level of devices change, then the electrical transition of the charge carriers within the band energy ranges from infrared to visible to UV energy spectrum regimes but the absorption coefficient of graphene is still found to have very small,