Estimating Target Doppler in Unsynchronized Multistatic ISAC Deployments with Mobile Nodes
Zaman Bhalli, Michele Rossi, Joerg Widmer, Marco Canil* · 2026
Read Estimating Target Doppler in Unsynchronized Multistatic ISAC Deployments with Mobile Nodes by Zaman Bhalli, Michele Rossi, Joerg Widmer, Marco Canil* (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-16934.txt.
Introduction
Bhalli's team gives the first method to estimate a target's Doppler shift with mobile, unsynchronised multistatic sensing-and-communication nodes and no external reflector. Clock mismatch between a moving transmitter and receivers, plus node motion, adds extra Doppler parts and phase offsets that distort the target's own frequency shift. Using phase offsets shared across multipath parts and geometric relations, they show the problem is solvable with at least four receivers. Numerical simulations across varied scenes confirm the approach works.
Catalog record
| CREATOR | Zaman Bhalli, Michele Rossi, Joerg Widmer, Marco Canil* |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 30901 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.16934
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Estimating Target Doppler in Unsynchronized Multistatic ISAC Deployments with Mobile Nodes Thanks: * corresponding author. This work was supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie COFUND Doctoral Programme “UNIPhD – Eight Century Legacy of Multidisciplinary Research and Training for the Next-Generation Talents”, grant agreement No. 101034319. This publication is part of grant JDC2024-055419-I, funded by MICIU/AEI/10.13039/501100011033 and by the ESF+. The work presented in this paper is (partially) supported by the MultiX project that has received funding from the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union’s Horizon Europe research and innovation programme under Grant Agreement No 101192521. This work has been funded by project PID2022-136769NB-I00 funded by MCIN/AEI/10.13039/501100011033 / FEDER, UE. TUCAN6-CM (TEC-2024/COM-460), funded by Comunidad de Madrid (ORDEN 5696/2024). Zaman Bhalli, Michele Rossi, Joerg Widmer, Marco Canil* Abstract isac ( isac ) is recognized as a key enabler for future 6g ( 6g ) networks, combining communication capabilities with pervasive sensing. In such systems, the estimation of the Doppler shift plays a crucial role for target characterization. However, typical real-world isac scenarios largely involve bistatic or multistatic configurations and mobile isac nodes. Under these conditions, Doppler estimation becomes particularly challenging, as clock asynchrony between the tx ( tx ) and the rx , combined with their mobility, introduces additional Doppler components and phase offsets that distort or disrupt the target-induced frequency shift. Existing works have considered these challenges separately or relied on external reference reflectors. In this paper, we present the first method to estimate the Doppler frequency of a target with mobile and asynchronous isac nodes in a multistatic configuration, considering the case of a mobile tx and multiple static rx , and without leveraging any external reflector. By leveraging the invariance of the phase offsets across multipath components and exploiting geometrical relationships, we show that the problem is solvable if at least 4 4 rx are present. We evaluate the proposed solution through numerical simulations in various scenarios, showing that it is a valid approach for estimating target Doppler shifts in unsynchronized multistatic isac deployments with mobile nodes. I Introduction Considered as one of the cornerstones for the 6g of wireless networks [ 4 ] , isac is expected to become an essential component of future wireless infrastructures. Seeking to embed sensing functionalities directly into communication systems, the promise is to enable a pervasive radio-based sensing fabric that extends over the whole communication network. In isac applications, accurate Doppler shift estimation plays a crucial role in target characterization [ 2 ] and in determining target motion [ 6 ] , making it a fundamental sensing feature. In the isac vision, the sensing functionality will predominantly rely on bistatic configurations, i.e., with physically separated tx and rx , as isac nodes are expected to consist of a combination of gnb and ue . In this context, the estimation of the Doppler shift poses several additional challenges compared to monostatic cases. Due to the unsynchronized clocks of the tx and rx , the received signal is affected by to ( to ), cfo ( cfo ), and po ( po ), which act as disturbance terms and hinder the reconstruction of the target’s Doppler. Moreover, the motion of one or both isac nodes introduces an additional Doppler component that dynamically combines with that of the target in a non-trivial manner. Current studies mainly address the challenges arising from clock asynchronies with static devices [ 6 , 15 , 16 , 1 ] , or consider mobile monostatic radars, which are not affected by such issues. In [ 13 ] and [ 14 ] , the authors tackle both problems at the same time, but their approach relies on the concurrent presence of los ( los ) and external static reflectors, limiting the applicability in real-world scenarios. In this work, we present a method for estimating the Doppler of a moving target using unsynchronized and mobile isac nodes, without relying on any external reflectors. Specifically, we consider an asynchronous multistatic configuration with one tx and multiple rx . Both the tx and the target are moving, while the rx remain static at fixed known locations. In the envisioned scenario, the tx corresponds to a mobile ue , while the rx could be different rx of a 5g ( 5g ) gnb or components of a cran ( cran ), where coherent processing is possible [ 7 ] . Please, note that industrial implementations of cran are becoming available [ 3 ] . An illustrative (but not limiting) example is that of a micro gnb [ 9 ] deployed in an urban street canyon, featuring multiple overlapping rx with highly directional beams. Such beams can be dynamically steered and adjusted to accommodate different communication and sensing requirements. We assume that all rx are phase-synchronized at baseband but employ separate rf ( rf ) front ends (i.e., with separate mixers, pll ( pll ), etc.). With this configuration, each rx experiences a slightly different cfo after down-conversion, due to the small hardware differences in the front ends. While this difference is usually negligible for communication, removing it is critical for sensing [ 15 ] , and each rx needs to independently compensate for its own cfo . In our approach, we assume that each rx receives two paths, which appear as peaks in the estimated cir ( cir ): the los path from the moving tx and the target path. Fig. 1 represents this scenario. The proposed methodology takes as input (i) the phases of the received paths, (ii) the aoa ( aoa ) of each path, and (iii) the known relative position of the rx . Then, four steps lead to the reconstruction of the target’s Doppler. First, leveraging the fact that cfo and po are common to all propagation paths of the same receiver, the los path is used to remove these offsets from the phases of the target path. Second, range-related phase terms are removed by taking time-domain phase differences between consecutive time steps. Third, the geometrical relationships between the phase terms and the gnb rx are exploited to reduce the number of independent terms. Finally, a non-linear system of equations is formulated and solved to estimate the target’s Doppler. As a result of the simplifications, the system becomes solvable if at least 4 rx are available. The main contributions of this work are: 1. We present the first method to estimate the Doppler frequency of a target in a multistatic scenario with mobile and asynchronous isac nodes. 2. We consider the challenging but realistic case where each isac rx exhibits a different cfo and po . 3. We evaluate the proposed solution through numerical simulations in various scenarios, showing that it represents a valid solution for the estimation of Doppler shifts in realistic multistatic isac scenarios. The remainder of the paper is organized as follows. Section II and Section III describe the system model and the proposed methodology, respectively. Section IV presents the simulation setup along with the obtained results, while Section V provides the concluding remarks. II System Description and Modeling This section presents the system architecture and model considered for our new Doppler