Feasibility of Low-Energy True Muonium Photoproduction

Ivo Schulthess, Benjamin Banto Oberhauser, Paolo Crivelli · 2026

Read Feasibility of Low-Energy True Muonium Photoproduction by Ivo Schulthess, Benjamin Banto Oberhauser, Paolo Crivelli (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-16557.txt.

Introduction

Schulthess, Oberhauser, and Crivelli assess whether low-energy true muonium could be made by near-threshold photoproduction on a fixed target. True muonium pairs a muon with an antimuon, and it is well understood in theory but never observed. Its purely leptonic makeup makes it a sharp probe of bound-state quantum electrodynamics and beyond-Standard-Model physics. Their simulations show CERN's proposed Gamma Factory could supply the needed photon energies and rates. Selections cut background below the signal. Later measurements could cover lifetime, hyperfine splitting, and Lamb shift.

Catalog record

CREATORIvo Schulthess, Benjamin Banto Oberhauser, Paolo Crivelli
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25078
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.16557

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Feasibility of Low-Energy True Muonium Photoproduction Ivo Schulthess, Benjamin Banto Oberhauser, Paolo Crivelli Abstract True muonium, the bound state of a muon and an antimuon, is a theoretically well-understood but experimentally unobserved exotic atom. Its purely leptonic nature makes it a sensitive probe for bound-state quantum electrodynamics and possible physics beyond the Standard Model. We present a feasibility study of low-energy true muonium production via near-threshold photoproduction on a fixed target. The study includes simulations of the signal and dominant background processes, estimates of the required photon fluxes, and an overview of possible gamma sources. We show that the proposed Gamma Factory at CERN could provide the necessary photon energies and rates for the production of true muonium. Furthermore, cut-based selections are shown to suppress the background below the expected signal level. Finally, we discuss possible physics opportunities beyond the first observation, including measurements of its lifetime, hyperfine splitting, and Lamb shift. I Introduction True muonium (TM), the bound state of a muon and an antimuon ( \mu^{+}\mu^{-} ), is a uniquely clean system for precision studies of bound-state quantum electrodynamics (QED) 28 ; 27 . As an “all-leptonic” exotic atom, it is free of nuclear finite-size effects and is compact (Bohr radius \sim 512~\mathrm{fm} ), which makes it simultaneously sensitive to higher-order QED corrections and to potential contributions from physics beyond the Standard Model. In particular, the muon anomalous magnetic moment provides one of the most stringent tests of the Standard Model in the lepton sector. Recent measurements by the Muon g –2 collaboration at Fermilab 1 , together with ongoing theoretical efforts to refine the Standard Model prediction 22 , have renewed interest in complementary probes of muon-sector interactions. A precise experimental handle on TM spectroscopy and decay observables would therefore be a valuable addition to the landscape of muon precision physics 28 ; 27 ; 21 . Despite considerable theoretical interest, TM has not yet been observed. Several experimental production concepts have been proposed, including threshold production in e^{+}e^{-} collisions 11 ; 10 ; 14 , fixed-target production with electrons or positrons on nuclei 7 ; 15 ; 2 , and searches at high-energy experiments such as LHCb 13 . These approaches can offer discovery potential, but they typically yield TM at high or ill-defined kinetic energy, which complicates direct measurements of intrinsic properties such as the decay rate, hyperfine splitting, or Lamb shift. In this work, we explore an alternative route based on near-threshold photoproduction, \gamma Z\to(\mu^{+}\mu^{-})Z , using photons with energies just above the production threshold \gtrsim$211\text{\,}\mathrm{MeV}$ . In this regime, TM can be produced with low kinetic energy and can emerge from a thin target, opening a path towards controlled measurements of its properties. A further advantage is the distinct event topology: TM decays to an e^{+}e^{-} pair on a timescale of order 1.8\text{\,}\mathrm{ps} , with the decay products nearly back-to-back in the low-energy limit, while the dominant QED backgrounds from direct pair production are strongly forward-peaked and can be reduced by geometric acceptance and kinematic selections. A schematic of the proposed method is presented in Fig. 1 . Figure 1 : Schematic of the proposed method. Photons impinge on a lead target where lepton pairs can be produced. The muon pairs can form the bound state of interest, TM in the ortho state, which decays into an electron–positron pair. The background process in this setup is electron–positron pairs produced from other mechanisms, which are mostly boosted in the forward direction. The central challenge is the photon source. The TM photoproduction cross section scales steeply with nuclear charge and is small even for high- Z targets. For lead, one expects \sigma_{\gamma Z}=$1.8\text{\times}{10}^{-35}\text{\,}{\mathrm{cm}}^{2}$ 16 ; 6 , implying that extremely large photon fluxes are required to reach observable yields. Moreover, deviations from a quasi-monoenergetic spectrum are critical. Photons below the threshold contribute only to backgrounds, whereas photons far above the threshold increase the TM kinetic energy and reduce the accessibility of low-energy observables. This makes joint optimization of photon spectrum, target material, and detector acceptance essential, and it directly links the feasibility of TM to the capabilities of emerging high-intensity photon sources 19 ; 23 . We therefore performed a feasibility study that investigates near-threshold TM production and dominant background mechanisms in simplified target and detector configurations, and we discussed promising photon-source concepts that could approach the required energy and flux regime. Candidate source classes include crystal radiators 8 ; 23 ; 33 , plasma- and laser-driven concepts 32 ; 35 ; 23 , and future high-rate concepts such as the Gamma Factory 4 ; 12 ; 9 . On the simulation side, we build on established particle-transport and electromagnetic frameworks 3 ; 20 and incorporate a dedicated treatment of TM production and dissociation. The results provide an initial assessment of whether low-energy TM production via photoproduction may become experimentally accessible in the near future. II Simulation Setup To assess the efficiency of the proposed detection scheme and the level of background, we performed simulations using Geant4 v11.3.0 3 , which includes muon-pair production up to the threshold in the upgraded electromagnetic physics subpackage 20 . The target was placed at the origin z=0 . We use the true particle properties without applying detector smearing or reconstruction effects. To obtain these, a cylindrical virtual detector with a length of 1500\text{\,}\mathrm{mm} , from z=$-500\text{\,}\mathrm{mm}$ to z=$1000\text{\,}\mathrm{mm}$ , and an inner radius of 150\text{\,}\mathrm{mm} was placed around the target. This longitudinal range is sufficient to capture the relevant events. If necessary, an end-cap detector can be placed in the forward direction to record all background events. A schematic of the setup is shown in Fig. 1 . The choice of target geometry is driven by the production and dissociation probabilities of TM. The dissociation length of TM in a solid target is l_{\mathrm{diss}}=\frac{1}{n\sigma} with \sigma=Z^{2}\times 1.3\times 10^{-21}~\mathrm{mm^{2}} , where n is the target density (number of atoms per unit volume) and Z is the nuclear charge number of the target material 18 . We chose a lead target thickness of 6.95\text{\,}\mathrm{\SIUnitSymbolMicro m} , corresponding to 2l_{\mathrm{diss}} . Thinner targets reduce TM production, whereas thicker targets lead to significantly more background events but almost no improvement in signal yield, because the number of additionally formed atoms cancels out with the number of atoms that dissociate. In the simulations, we consider photons whose energies follow a Gaussian distribution with {E_{\gamma}=$300\pm 30\text{\,}\mathrm{MeV}$} . For the signal simulation, the muon-pair production is simulated with Geant4 using cross-section biasing to increase the number of generated events. The produced muon pairs are then assumed to form the ortho-TM bound state. The subsequent decay into an electron–positron pair is Monte-Carlo sampled using the kinematic variables of the TM, and the hit positions in the detector are calculated analytically. For the background simulation, no biasing is applied and 4\text{\times}{10}^{13}\text{\,}\mathrm{p} rimary photons are simulated directly. We preselect only events within the kinematically allowed regime E_{\mathrm{th}}=\gamma_{\mathrm{TM}}\,\left(m_{\mu}\pm\beta_{\mathrm{TM}}\sqrt{m_{\mu}^{2}-m_{e}^{2}}\right) , where m_{e} is the electron mass, \gamma_{\mathrm{TM}} and \beta_{\mathrm{TM}} are the Lorentz gamma and beta factors of the TM, respectively. This leads to a range of E_{\mathrm{tot}}\in[43.5,~256.5] MeV, which reduces the background events by a factor of 5.9\text{\times}{10}^{4}\text{\,}\mathrm{a} nd leads to 4.6\times 10^{-8}~\mathrm{e^{-}/\gamma} and 4.1\times 10^{-8}~\mathrm{e^{+}/\gamma} . At the same

Read the complete text