Enhanced input stacking for non-square MIMO modal identification of aeronautical structures via Fast and Relaxed Vector Fitting
BEATRICE E. BAURET MARTÍNEZ, GABRIELE DESSENA, MARCO CIVERA, OSCAR E. BONILLA-MANRIQUE · 2026
Read Enhanced input stacking for non-square MIMO modal identification of aeronautical structures via Fast and Relaxed Vector Fitting by BEATRICE E. BAURET MARTÍNEZ, GABRIELE DESSENA, MARCO CIVERA, OSCAR E. BONILLA-MANRIQUE (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-16037.txt.
Introduction
Bauret Martínez and three colleagues adapt Fast and Relaxed Vector Fitting to aircraft vibration testing. The frequency-domain tool comes from electrical engineering and was little used for mechanical systems. Their three-stage method fits frequency responses, extracts system poles, and recovers modal parameters. It matched existing methods on a beam model and on ground vibration data from a BAE Hawk T1A jet.
Catalog record
| CREATOR | BEATRICE E. BAURET MARTÍNEZ, GABRIELE DESSENA, MARCO CIVERA, OSCAR E. BONILLA-MANRIQUE |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41447 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.16037
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Enhanced input stacking for non-square MIMO modal identification of aeronautical structures via Fast and Relaxed Vector Fitting BEATRICE E. BAURET MARTÍNEZ, GABRIELE DESSENA, MARCO CIVERA, OSCAR E. BONILLA-MANRIQUE Abstract Fast and Relaxed Vector Fitting (FRVF) is a frequency-domain system identification approach that has been widely adopted in electrical system modelling, while its application to mechanical systems has remained relatively unexplored. In this work, FRVF is reformulated for the identification of structural modal parameters of an aircraft based on Ground Vibration Test (GVT) data within a Multi-Input Multi-Output (MIMO) framework. The proposed procedure consists of three stages: (i) rational approximation of frequency response functions via an enhanced input-stacking strategy, (ii) identification of system poles from the resulting rational model, and (iii) estimation of modal parameters from the extracted poles and associated residues. The methodology is first numerically validated on a MIMO beam model, with particular emphasis on accuracy and robustness under increasing measurement noise. Subsequently, experimental validation is conducted using GVT data from the BAE Systems Hawk T1A aircraft. The results obtained demonstrate a level of performance comparable to that achieved by existing methods. Overall, the extended MIMO formulation of FRVF exhibits high accuracy and strong robustness to measurement noise, highlighting its suitability for application in GVT-based modal analysis. \editor The MIMO Fast and Relaxed Vector Fitting implementation (Data file 1 – A tutorial for Fast and Relaxed Vector Fitting for modal analysis) used in this work is openly available from the Zenodo repository at [DOI to be reserved] and the identification results and numerical dataset (Data file 2 – Data supporting: Enhanced input stacking for non-square MIMO modal identification of aeronautical structures via Fast and Relaxed Vector Fitting) supporting this study are openly available from the Zenodo repository at [DOI to be reserved]. In addition, this study used third-party experimental data (Data file 3 – BAE T1A Hawk Full Structure Modal Test) made available at [ https://orda.shef.ac.uk/articles/dataset/BAE_T1A_Hawk_Full_Structure_Modal_Test/24948549 ]. Data files 1 and 2 are available under the terms of the [GNU General Public License v3.0 (GPL 3.0)]. \supplementary Authorship credit statement : Conceptualisation, BE.BM., G.D., and M.C.; methodology, BE.BM., G.D., and M.C.; software, BE.BM. and M.C.; validation, BE.BM., G.D., and M.C.; formal analysis, BE.BM.; investigation, BE.BM.; resources, G.D., M.C., and OE.BM.; data curation, BE.BM.; writing—original draft preparation, BE.BM.; writing—review and editing, BE.BM, G.D., M.C., and OE.BM.; visualisation, BE.BM, G.D., and M.C.; supervision, G.D. and M.C.; project administration, G.D. and M.C.; funding acquisition, G.D., M.C., and OE.BM.. All authors have read and agreed to the published version of the manuscript. † † year: 2026 † † received: This work has been supported by the Madrid Government ( Comunidad de Madrid – Spain) under the Multiannual Agreement with the Universidad Carlos III de Madrid ( IA_aCTRl-CM-UC3M ). The first author’s stay at Politecnico di Torino during her graduate thesis was supported by the Erasmus+ Traineeship Programme of the European Union. The first author is supported by grant JDC2024-055593-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. The third author is supported by the Centro Nazionale per la Mobilità Sostenibile (MOST – Sustainable Mobility Centre), Spoke 7 (Cooperative Connected and Automated Mobility and Smart Infrastructures), Work Package 4 (Resilience of Networks, Structural Health Monitoring, and Asset Management). † † corresponding: (Primary corresponding author: M. Civera; Corresponding author: G. Dessena) . The second and third authors contributed equally to this work. † † address: B.E. Bauret Martínez and G. Dessena are with the Department of Aerospace Engineering at the Universidad Carlos III de Madrid, Av.da de la Universidad 30, Leganés, 28911, Madrid, Spain. (e-mails: [email protected] and [email protected] ). M. Civera is with the Department of Structural, Geotechnical and Building Engineering at the Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129, Turin, Italy (e-mail: [email protected] ). O.E. Bonilla-Manrique is with the Electronic Technology Department at the Universidad Carlos III de Madrid, Av.da de la Universidad 30, Leganés, 28911, Madrid, Spain. (e-mail: [email protected] ). keywords Aeronautical Structures, Ground Vibration Test, System Identification, Modal Analysis, Multi-Input Multi-Output, Enhanced Input Stacking, Vector Fitting. I INTRODUCTION A precise representation of aircraft structural dynamics is a fundamental requirement for the initial certification of airworthiness [ 1 ] . Within aeronautics, Ground Vibration Testing (GVT) constitutes the experimental basis for the identification of natural frequencies (either f_{n} , in Hz, or \omega_{n}=2\pi_{n} , in rad/s), damping ratios ( \zeta_{n} ), and mode shapes ( \mathbf{\phi}_{n} ), which are essential for finite element model updating [ 2 ] and for the prediction of aeroelastic instabilities, such as flutter [ 3 ] . The extraction of these modal parameters from measured data is typically addressed through System Identification (SI) methodologies. Although Single-Input Multiple-Output (SIMO) formulations are often adequate, the increasing structural complexity of modern aerospace vehicles requires the adoption of Multi-Input Multi-Output (MIMO) frameworks to accurately represent coupled and closely spaced vibration modes. Classical identification techniques, including the Least Squares Complex Exponential (LSCE) method [ 4 ] , frequently exhibit limited robustness and degraded performance in the presence of measurement noise, requiring careful windowing to mitigate spectral leakage. LSCE estimates the modal parameters by fitting sums of complex exponentials to free-decay responses derived from impulse response functions. In contrast, frequency-domain techniques, such as the improved Loewner Framework (iLF) [ 5 ] , operate directly in the frequency-domain, thus naturally avoiding explicit reconstruction of impulse responses. The iLF constructs reduced-order models from Frequency Response Functions (FRFs) using Loewner matrices and tangential interpolation, offering reliable broadband MIMO identification. However, the computational cost of the classical implementation of the Loewner Framework can become significant for large-scale datasets [ 6 ] . By comparison, Fast and Relaxed Vector Fitting (FRVF), originally introduced as Vector Fitting (VF) in the context of electrical network modelling [ 7 ] and later extended with its fast [ 8 ] and relaxed versions [ 9 ] , provides a computationally efficient and robust frequency-domain alternative for system identification. In the present study, FRVF is reformulated for its application to general MIMO structural systems, thus accommodating non-square input–output configurations commonly encountered in full-scale aircraft GVT campaigns. This overcomes the well-known restrictions of the current FRVF implementation to square systems only [ 10 ] , i.e., applications in which the number of input and output channels coincide. Indeed, while this constraint is rarely restrictive in electrical circuit testing (where FRVF originates from), it becomes critical in experimental modal analysis for the identification of mechanical systems, where the number of measured response channels typically far exceeds the available excitation locations. Through the use of an enhanced input-stacking strategy, the proposed approach aims to enable scalable and noise-tolerant estimation of modal parameters via FRVF using non-square MIMO data, facilitating its deployment in realistic aircraft testing scenarios. According to the main aim, the objectives of this work are as follows: i. Generalise the FRVF formulation to non-square MIMO systems using an enhanced input-stacking approach; ii. Assess the accuracy and noise robustness of the method through numerical simulations on a beam model; iii. Evaluate its performance for applications to experimental aircraft GVT data compared with established SI techniques and literature results. II METHODOLOGY Classical SI techniques for modal analysis seek to determine the structure’s f_{n} , \zeta_{n} , and \mathbf{\phi}_{n} from experimentally measured FRFs. Within this class of methods,