Microwave-to-Optical Quantum Transduction via Defect-Mediated Scattering in Diamond

Kyosuke Goto, Hodaka Kurokawa, Hideo Kosaka, Kazuki Koshino · 2026

Read Microwave-to-Optical Quantum Transduction via Defect-Mediated Scattering in Diamond by Kyosuke Goto, Hodaka Kurokawa, Hideo Kosaka, Kazuki Koshino (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-15988.txt.

Introduction

Kyosuke Goto and three colleagues propose a microwave-to-optical converter built from a single color center, a defect, inside a diamond resonator that vibrates with light. Strong coupling between defect and cavity lets the device convert signals at pump powers near 10 picowatts, avoiding the heating that strong pumping causes. The design could link distant superconducting processors, generating remote entanglement at kilohertz rates with fidelity above 0.9.

Catalog record

CREATORKyosuke Goto, Hodaka Kurokawa, Hideo Kosaka, Kazuki Koshino
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29707
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.15988

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Microwave-to-Optical Quantum Transduction via Defect-Mediated Scattering in Diamond Kyosuke Goto, Hodaka Kurokawa, Hideo Kosaka, Kazuki Koshino Abstract Scaling up superconducting quantum processors remains a central challenge for realizing fault-tolerant quantum computation. Although distributed architectures based on optical photons offer a promising route to scalability, they require an efficient microwave-to-optical quantum transducer that operates at cryogenic temperatures. Existing approaches typically rely on strong optical pumping, which induces undesirable heating and degrades single-photon coherence. Here, we propose a microwave-to-optical quantum transducer based on double-resonant scattering from a single color center embedded in a diamond optomechanical resonator. We show that strong coupling between the color center and the optical cavity enables coherent conversion at extremely low pump powers on the order of 10 pW. The proposed device enables remote entanglement generation on the order of 1 kHz with a fidelity exceeding 0.9, demonstrating a viable pathway toward ultra-low-power, high-efficiency quantum transducers based on individual solid-state defects for future distributed superconducting quantum networks. Fault-tolerant universal quantum computing is expected to require at least several hundred thousand physical qubits Gidney and Ekerå 2021 , posing a major challenge for modern quantum science and technology. To address this scalability issue, distributed quantum computing architectures Nickerson et al. 2013 ; Main et al. 2025 ; Weaver et al. 2025 have attracted increasing attention across multiple platforms. For superconducting processors operated at millikelvin temperatures using microwave tones, optical interconnects are attractive because they could enable room-temperature quantum state transfer through flexible, large-bandwidth optical fibers. In practice, however, this approach requires a microwave-to-optical quantum transducer that combines high conversion efficiency with low added noise, which remains an ongoing challenge. In recent years, substantial progress has been made in microwave-to-optical quantum transducers based on electro-optics Xu et al. 2021 ; Sahu et al. 2022 ; Warner et al. 2025 , optomechanics Mirhosseini et al. 2020 ; Jiang et al. 2023 ; Meesala et al. 2024 ; Weaver et al. 2024 ; van Thiel et al. 2025 ; Zhao et al. 2025 , magnonics Hisatomi et al. 2016 , and atomic ensembles Han et al. 2018 ; Vogt et al. 2019 ; Tu et al. 2022 ; Rochman et al. 2023 ; Borówka et al. 2024 ; Xie et al. 2025 . A basic strategy is to use small- V , high- Q resonators to enhance the vacuum coupling g between target modes while suppressing unwanted single-photon relaxation. A large g also reduces the required pump power and hence pump-induced heating and added noise. However, overly weak pumping lowers the conversion efficiency. Resolving this efficiency-noise trade-off remains a key challenge for practical microwave-to-optical quantum transducers. Here we propose an extremely weak-pump quantum transducer based on double-resonant scattering from a single color center in a diamond optomechanical resonator. The scheme exploits the strong coupling of NV 0 to both optical and strain fields by combining the small mode volume of an optomechanical resonator with the resonant dipole transitions of NV 0 . The resulting vacuum coupling strength, more than three orders of magnitude larger than in conventional optomechanical systems, enables coherent transitions between resonant levels and thus highly efficient conversion under weak pumping. Steady-state analysis shows an external quantum efficiency of 0.32 at a pump power of 55 pW. This enables remote entanglement generation at 3.1 kHz with fidelity 0.93 at a repetition rate of 1 MHz, providing a pathway toward distributed superconducting quantum computers. Figure 1: (a) Mode coupling diagram. We operate in the triply resonant condition where the microwave mode, the mechanical mode, and the |0\rangle\leftrightarrow|1\rangle transition satisfy \omega_{a}=\omega_{b}=\omega_{10} . The optical mode is tuned to the |0\rangle\leftrightarrow|2\rangle transition. (b) Schematic illustration of the transduction process in the reduced model. The microwave and optical waveguides couple directly to an NV 0 center. A pump tone drives the |1\rangle\leftrightarrow|2\rangle transition resonantly at \omega_{21}=\omega_{20}-\omega_{10} . Our quantum transducer consists of a microwave resonator \hat{a} (frequency \omega_{a}/2\pi ), a mechanical resonator \hat{b} (frequency \omega_{b}/2\pi ), an NV 0 center, and an optical resonator \hat{c} (frequency \omega_{c}/2\pi ), coupled in series as shown in Fig. 1 (a). The NV 0 center has four ground states formed by orbital states ( |\pm\rangle_{\mathrm{o}} ) and spin states ( |\uparrow\rangle_{\mathrm{s}},|\downarrow\rangle_{\mathrm{s}} ) Baier et al. 2020 ; Kurokawa et al. 2024 ; Kurokawa et al. 2025 . We define \hat{L}_{z}=\hat{\sigma}_{z} and \hat{L}_{\pm}=(\hat{\sigma}_{x}\pm i\hat{\sigma}_{y})/\sqrt{2} in the orbital subspace, and \hat{S}_{z}=\hat{\sigma}_{z}/2 in the spin subspace. The zero-field Hamiltonian is then given by \hat{H}_{\mathrm{NV^{0}}}/\hslash=2\lambda_{\mathrm{so}}\hat{L}_{z}\hat{S}_{z}+\epsilon_{\perp}(\hat{L}_{+}+\hat{L}_{-}) , where the two terms describe spin-orbit coupling and static strain, respectively. For perturbative strain, the ground states split into two spin-degenerate branches separated by \Delta_{\mathrm{gs}}=2\sqrt{\lambda_{\mathrm{so}}^{2}+\epsilon_{\perp}^{2}}\simeq 10 GHz. Neglecting spin, NV 0 reduces to a three-level system with lower and upper branches |0\rangle and |1\rangle , and orbital excited state |2\rangle . Using this model, the system Hamiltonian is \hat{H}/\hslash=\omega_{a}\hat{a}^{\dagger}\hat{a}+\omega_{b}\hat{b}^{\dagger}\hat{b}+\omega_{c}\hat{c}^{\dagger}\hat{c}+\omega_{10}\hat{\sigma}_{11}+\omega_{20}\hat{\sigma}_{22}+g_{x}(\hat{a}^{\dagger}\hat{b}+\hat{a}\hat{b}^{\dagger})+g_{y}(\hat{b}^{\dagger}\hat{\sigma}_{01}+\hat{b}\hat{\sigma}_{10})+g_{02}(\hat{\sigma}_{20}\hat{c}+\hat{\sigma}_{02}\hat{c}^{\dagger})+g_{12}(\hat{\sigma}_{21}\hat{c}+\hat{\sigma}_{12}\hat{c}^{\dagger}) , where \hat{\sigma}_{ij}\equiv|i\rangle\langle j| (i,j=0,1,2) and \omega_{ij} is the transition frequency for |j\rangle\rightarrow|i\rangle . Here, \omega_{10}(=\Delta_{\mathrm{gs}}) is a microwave-frequency transition, and \omega_{20} is the zero-phonon line (ZPL) of NV 0 . The microwave mode \hat{a} couples to the mechanical mode \hat{b} via the piezoelectric effect with strength g_{x} , typically g_{x}/2\pi\sim 1~\mathrm{MHz} in piezo-optomechanical systems Mirhosseini et al. 2020 ; Jiang et al. 2023 ; Meesala et al. 2024 ; Weaver et al. 2024 ; van Thiel et al. 2025 ; Zhao et al. 2025 . The mechanical mode couples to the |0\rangle\leftrightarrow|1\rangle transition with strength g_{y} . Although the achievable mechanical coupling for NV 0 in an optomechanical resonator is not yet known, couplings on the order of 10~\mathrm{MHz} have been estimated for other color centers, such as NV - and group-IV color centers including SiV Kim et al. 2023 ; Joe et al. 2025 , suggesting that g_{y}/2\pi\sim 1~\mathrm{MHz} should be feasible. On the optical side, because the cavity linewidth is taken to be broader than \omega_{10} , the optical cavity mode \hat{c} , which is resonant with \omega_{20} , couples to both the |0\rangle\leftrightarrow|2\rangle and |1\rangle\leftrightarrow|2\rangle transitions. These transitions follow different polarization selection rules and are controllable by the external strain field. In this work, we focus on the strain regime where the |0\rangle\leftrightarrow|2\rangle coupling exceeds the |1\rangle\leftrightarrow|2\rangle coupling (i.e., g_{02}/2\pi=1~\mathrm{GHz} and g_{12}/2\pi=0.2~\mathrm{GHz} ; see Supplemental Material). In the following, we set \omega_{a}/2\pi=\omega_{b}/2\pi=\omega_{10}/2\pi=10 GHz, \omega_{20}/2\pi=\omega_{c}/2\pi=500 THz, and \omega_{21}=\omega_{20}-\omega_{10} , unless otherwise specified. From the full Hamiltonian incorporating all degrees of freedom [Fig. 1(a)], we derive a reduced model [Fig. 1(b)] in which the NV 0 center couples directly to the waveguides, employing the steady-state approximation to the three cavity modes (see Supplemental Material for derivation). Under the reduced Hamiltonian, the Heisenberg-Langevin equation for \hat{\sigma}_{ij} is d\hat{\sigma}_{ij}/dt=\sum_{m,n}\Big(M_{ij,mn}^{(1)}\hat{\sigma}_{mn}+M_{ij,mn}^{(2)}\hat{a}_{\mathrm{in}}^{\dagger}(t)\hat{\sigma}_{mn}+M_{ij,mn}^{(3)}\hat{\sigma}_{mn}\hat{a}_{\mathrm{in}}(t)+M_{ij,mn}^{(4)}\hat{c}_{\mathrm{in}}^{\dagger}(t)\hat{\sigma}_{mn}+M_{ij,mn}^{(5)}\hat{\sigma}_{mn}\hat{c}_{\mathrm{in}}(t)\Big) . Here, M_{ij,mn}^{(1\sim 5)} are coefficient tensors, while \hat{a}_{\mathrm{in}}(t) and \hat{c}_{\mathrm{in}}(t) are the input-field operators from the microwave and optical waveguides, respectively. M_{ij,mn}^{(1\sim 5)} incorporate the relaxation processes through the usual Lindblad-operator formalism. These processes are represented by the effective relaxation rates into the environment, \gamma_{10}^{i}=\gamma_{10}+4g_{y}^{2}\kappa_{b}^{i}/(\kappa_{b}^{t})^{2}+16g_{x}^{2}g_{y}^{2}\kappa_{a}^{i}/[(\kappa_{a}^{t})^{2}(\kappa_{b}^{t})^{2}] , \gamma_{20}^{i}=\gamma_{20}+4g_{02}^{2}\kappa_{c}^{i}/(\kappa_{c}^{t})^{2} , and \gamma_{21}^{i}=\gamma_{21}+4g_{12}^{2}\kappa_{c}^{i}/(\kappa_{c}^{t})^{2} , which include both the internal relaxation rates of NV 0 for each transition ( \gamma_{10}/2\pi=33 kHz, \gamma_{20}/2\pi=3.5 MHz, and \gamma_{21}/2\pi=3.5 MHz Baier et al. 2020 ; Kurokawa et al. 2025 ) and the cavity-mediated contributions, together with the cavity-mediated relaxation into the waveguide modes, \gamma_{10}^{e}=16g_{x}^{2}g_{y}^{2}\kappa_{a}^{e}/[(\kappa_{a}^{t})^{2}(\kappa_{b}^{t})^{2}]=2\pi\times 1.3 MHz, \gamma_{20}^{e}=4g_{02}^{2}\kappa_{c}^{e}/(\kappa_{c}^{t})^{2}=2\pi\times 14 MHz, and \gamma_{21}^{e}=4g_{12}^{2}\kappa_{c}^{e}/(\kappa_{c}^{t})^{2}=2\pi\times 0.56 MHz. Here, \kappa_{A}^{i}

Read the complete text