Time Domain Near Memory Computing Engine

Sarthak Antal Ph.D. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] Steve Enosh M.S. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] · 2026

Read Time Domain Near Memory Computing Engine by Sarthak Antal Ph.D. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] Steve Enosh M.S. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-14162.txt.

Introduction

Antal and Enosh present a time-domain near-memory computing engine for energy-efficient AI hardware. Moving data often burns more energy than computing itself, so in-memory and near-memory designs matter. Fully digital designs scale robustly with higher resolution, while analog in-memory computing saves energy on low-precision work but pays overhead for peripheral converters. The proposed architecture targets low-precision multiply-and-accumulate operations, converting digital weight bits stored in SRAM through a current-steering digital-to-analog converter.

Catalog record

CREATORSarthak Antal Ph.D. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] Steve Enosh M.S. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected]
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34710
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.14162

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Time Domain Near Memory Computing Engine Sarthak Antal Ph.D. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] Steve Enosh M.S. Student Elmore Family School of ECE Purdue University West Lafayette, USA [email protected] Abstract The increasing computational demand of AI workloads has intensified the need for energy-efficient in-memory and near-memory computing architectures, particularly because data movement often consumes significantly more energy than the computation itself. While fully digital architectures provide robust scalability and support higher-resolution computation, analog in-memory computing has demonstrated improved energy efficiency for low-precision workloads. However, its reliance on peripheral DACs and ADCs introduces additional power, area, and design overhead. To address these challenges, this work presents a time-domain near-memory computing architecture for low-precision multiply-and-accumulate (MAC) operations. In the proposed approach, digital weight bits stored in SRAM are converted using a current-steering DAC, while the digital input vector is encoded by an N-pulse generator. This enables multiplication to be performed in the time domain while maintaining a digital-friendly interface. Two accumulation schemes, a delay-cell-based architecture and a counter-based architecture, are investigated and compared in terms of design trade-offs, linearity, scalability, and power efficiency. To improve technology portability, the N-pulse generator and counters are implemented using RTL synthesis, while the current-steering DAC remains in the analog domain. A 4 × 4 MAC prototype is implemented in a 1 V supply, achieving an operating frequency of 40 MHz, power consumption of 42uW , and energy efficiency of 7.62 TOPS/W. I Introduction With the rapid growth of AI workloads, the demand for energy-efficient in-memory and near-memory computing has increased significantly, as the energy cost of data movement can be orders of magnitude higher than that of computation. In the target architecture, the weights are stored in SRAM, while the input vectors are provided in digital form. Analog computing architectures suffer an overhead cost of additional peripheral circuits, such as DACs and ADCs, since the input and output interfaces of the computing engine must remain digital. Fully digital architectures offer an attractive solution for higher-resolution computation, typically beyond 8 bits. However, recent studies have shown that for applications requiring sub-8-bit precision, analog in-memory computing can provide superior energy efficiency. [ 1 ] . The energy efficiency of voltage-domain data converters degrades rapidly with increasing resolution. For an ideal ADC, the signal-to-noise ratio (SNR) is related to the effective number of bits (ENOB) as \mathrm{SNR}=6.02\times\mathrm{ENOB}+1.76\ \mathrm{dB}. (1) Therefore, improving the resolution by 1 bit requires approximately a 6 dB improvement in SNR. Since SNR is proportional to the ratio of signal power to noise power, a 6 dB SNR improvement corresponds to a 4 \times reduction in noise power. In voltage-domain circuits, the dominant noise contribution is often thermal noise, which is proportional to kT/C . Thus, reducing the noise power by 4 \times requires increasing the sampling capacitance by approximately 4 \times . Since the dynamic power required to drive capacitive loads scales linearly with capacitance, a 4 \times increase in capacitance results in approximately a 4 \times increase in power consumption. Consequently, achieving each additional bit of resolution in a voltage-domain ADC typically requires an approximately 4 \times increase in power. This exponential dependence highlights the fundamental power-scaling limitation of voltage-domain data converters at higher resolutions. With continued technology scaling, the reduced voltage headroom limits the achievable SNR of ADCs and DACs, as the available signal power decreases. One approach to address this challenge is heterogeneous integration, where different technology nodes can be optimized for digital and analog functions independently. However, this approach introduces additional overheads, including high-speed I/O interfaces, increased power consumption, integration complexity, and fabrication cost. Alternatively, recent research has explored hybrid voltage–time-domain [ 2 ] and fully time-domain architectures [ 3 ] . These approaches exploit the fact that the device transition frequency (ft) generally improves with technology scaling, enabling faster switching, improved timing resolution, and enhanced jitter tolerance. As a result, time-domain circuits, particularly time-to-digital converters (TDCs), have emerged as a promising solution for achieving higher resolution in scaled technologies. In this work, we propose a time-domain near-memory computing architecture in which the digital weight bits fetched from SRAM are applied to a current-steering DAC, while the input vector is encoded using an N-pulse generator. This enables multiplication to be performed in the time domain with improved power efficiency. For the accumulation operation, two architectures are investigated: a delay-cell-based approach and a non-traditional counter-based adding approach. Their design trade-offs are analyzed, and the results of the superior architecture are presented. The paper is organized as follows: Section II presents the system-level design of the two proposed macro architectures. Section III describes the timing diagram of the Macros. Section IV describes the individual circuit blocks and their corresponding simulation results. Section V presents compares the two architectures. Section VI is the top-level simulation results and concludes the paper in Section VII by comparing the proposed design with prior state-of-the-art works and outlining potential directions for future work. II System Level Design II-A Architecture I: Delay-Cell-Based Time-Domain MAC The first architecture as shown in Fig1 performs the MAC operation in two phases: a multiplication phase and an accumulation phase. In the multiplication phase, a 4\times 4 multiplication is performed between the digital input vector and the digital weight values. Since the inputs are available in the digital domain, the input vector is first converted into the time domain using an N -pulse generator. The N -pulse generator is a digital block that produces a number of pulses proportional to the input code. For example, an input code of 0000 produces no pulse activity, while an input code of 1111 produces 16 pulses. Thus, the 4-bit digital input is encoded as a pulse-count-based time-domain signal. The N -pulse generator is implemented using RTL synthesis and designed with timing constraints that support a maximum clock frequency of 100 MHz. Therefore, the minimum pulse width is determined by the clock period corresponding to this operating frequency. In parallel, the digital weight bits are applied to a 4-bit current-steering DAC, which generates an output current proportional to the digital weight code. The multiplication operation is realized by using the DAC output current and the pulse duration generated by the N -pulse generator to charge a capacitor. The resulting voltage across the capacitor is given by V_{\mathrm{MAC}}=\frac{I_{\mathrm{DAC}}\cdot T_{\mathrm{pulse}}}{C}, (2) where I_{\mathrm{DAC}} is the current generated by the current-steering DAC, T_{\mathrm{pulse}} is the effective pulse duration generated by the N -pulse generator, and C is the integration capacitance. The value of C is chosen such that the thermal noise contribution remains below the quantization noise corresponding to the target 4-bit resolution. The thermal noise associated with the capacitor is given by \overline{v_{n}^{2}}=\frac{kT}{C}, (3) where k is Boltzmann’s constant and T is the absolute temperature. The accumulation operation is performed using a delay-cell-based architecture. The voltage generated from each input–weight multiplication controls a PMOS device that current-starves a chain of eight inverters. The output of each delay cell is then applied to the input of the next delay stage, whose delay is controlled by the subsequent input–weight product. In this manner, the delay contributions from multiple multiplication results are accumulated in the time domain, thereby realizing the accumulation operation. The final digital output

Read the complete text