Surface Growth Driven by an Optimality Criterion

Rohan Abeyaratne, Roberto Paroni, Marco Picchi Scardaoni · 2026

Read Surface Growth Driven by an Optimality Criterion by Rohan Abeyaratne, Roberto Paroni, Marco Picchi Scardaoni (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-13602.txt.

Introduction

Rohan Abeyaratne, Roberto Paroni and Marco Picchi Scardaoni propose a variational framework for surface growth driven by a best-choice principle. Rather than setting a kinetic law, each time step's shape solves a constrained smallest-value problem. Growth is one-way surface laying under a global mass constraint, driven by a goal measure taken as structural mean compliance. The approach is shown on a linear elastic cantilever beam whose height evolves by layered build-up, where residual stresses can break convexity and cause clumping.

Catalog record

CREATORRohan Abeyaratne, Roberto Paroni, Marco Picchi Scardaoni
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE49296
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.13602

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Surface Growth Driven by an Optimality Criterion Rohan Abeyaratne, Roberto Paroni, Marco Picchi Scardaoni Abstract . We propose a variational framework for accretive surface growth driven by an optimality principle. Rather than prescribing a kinetic law, the configuration at each time step is obtained, within a time-discrete setting, as the solution of a constrained minimization problem. Growth is modeled as an irreversible surface deposition process subject to a global mass constraint, while the driving mechanism is encoded in an objective functional, here taken to be the structural mean compliance. The approach is illustrated on a linearly elastic cantilever beam whose cross-sectional height evolves through layered accretion, possibly involving prestrain and precurvature. Growth-induced residual stresses can alter the convexity of the compliance functional, leading to nonuniqueness and localization phenomena. We explore the possibility of adding a regularization term penalizing deviations from the previous-step configuration. Finally, through a formal limiting procedure, we derive from the time-discrete formulation a time-continuous limit in the form of a constrained gradient flow. 1. Introduction Surface growth, also known as accretive growth , describes the evolution of a body through the addition of material exclusively at its boundary, in contrast to volumetric growth processes in which mass is generated throughout the bulk. This mechanism governs the development of a wide range of biological and physical systems, including seashells, horns, tree trunks, bones (see, e.g., Thompson [ 32 ] ), and engineered structures fabricated by additive manufacturing. In such systems, newly deposited material becomes progressively incorporated into the solid, modifying both geometry and mechanical response over time. In the mechanics literature, growth is traditionally modeled by prescribing the evolution of internal variables, most commonly a growth tensor , through suitable kinetic laws. A foundational framework was introduced in the seminal work of Skalak et al. [ 29 ] , and the general morphoelastic theory of growth was systematically developed following the influential paper of Rodriguez et al. [ 28 ] ; see also the comprehensive monographs by Goriely [ 15 ] and Taber [ 31 ] , and the special issue [ 24 ] . In this setting, a multiplicative decomposition of the deformation gradient identifies a growth tensor that represents the local addition of mass. Growth is then modeled through an evolution law for this tensor, typically driven by stress, strain, or other biological or chemical stimuli (e.g., Di Carlo and Quiligotti [ 11 ] ; Ambrosi and Mollica [ 3 ] ; Ambrosi and Guana [ 4 ] ; Erlich and Zurlo [ 13 , 14 ] ). Other important developments incorporated residual stress and geometric incompatibility (e.g., Hoger [ 18 ] ; Chen and Hoger [ 9 ] ; Epstein and Maugin [ 12 ] ), revealing how incompatible growth can generate internal stresses even in the absence of external loads. Such models have also shown that growth may induce mechanical instabilities and pattern formation (e.g., Goriely and Ben Amar [ 16 ] ; Moulton et al. [ 22 ] ). We also remark that a lagrangian, variatonal theory of growth has been recently proposed in [ 17 ] by Grillo, Pastore, and Di Stefano. Surface accretion, in contrast to volumetric growth, has been formulated through evolving-domain descriptions, configurational-force balances, and kinetic relations for the interfacial velocity (e.g., Tomassetti et al. [ 33 ] ; Zurlo and Truskinovsky [ 36 , 37 , 34 ] ; Naghibzadeh et al. [ 23 ] ; Renzi et al. [ 27 ] ). In all these approaches—whether volumetric or interfacial—the growth rate is prescribed through a constitutive evolution law. This framework has clarified many important consequences of imposed growth fields; however, it does not treat growth as the outcome of a global selection principle. In the simplest three-dimensional setting, surface growth may be described as follows. At time t , let the body occupy a region R_{t}\subset\mathbb{R}^{3} in the reference configuration, with boundary \partial R_{t} . If \mathbf{r}=\mathbf{r}(s^{1},s^{2},t) parametrizes \partial R_{t} , the boundary velocity decomposes as \frac{\partial\mathbf{r}}{\partial t}=v_{n}\mathbf{n}+\mathbf{v}_{\mathrm{tan}}, where \mathbf{n} is the outward unit normal, v_{n} the normal growth velocity, and \mathbf{v}_{\mathrm{tan}} the tangential component. Only v_{n} contributes to the geometric evolution; the tangential component merely induces a reparametrization. Surface growth must satisfy mass conservation at the evolving interface. Let \rho be the bulk mass density of the incoming mass and J the mass flux per unit area supplied to the boundary. The local interfacial balance then reads \rho v_{n}=J. This relation directly links the normal velocity of the boundary to the incoming mass flux. Depending on the physical context, one may prescribe the flux J , or instead postulate an evolution for v_{n} , with the corresponding flux determined a posteriori . In the latter case, the normal growth velocity may depend on geometric quantities, on the stress state of the body, or on other relevant physical fields. While prescribing J or specifying a constitutive relation for v_{n} is appropriate in some physical growth processes, in many biological systems such prescriptions are difficult, if not impossible, to establish from first principles. One may infer constitutive laws retrospectively from observed growth patterns, but this approach is descriptive rather than predictive. The idea that living organisms are shaped so as to optimize functional performance is both intuitively plausible and empirically supported. For example, the morphology of certain organisms enhances feeding efficiency [ 20 ] ; the geometry and structure of the rachis in avian feathers achieves an optimized balance between lightness, strength, and flexibility [ 30 ] ; the spatial distribution of branches and leaves in trees promotes maximal light interception [ 19 ] ; and in both trees and bones, variations in cross-sectional geometry often follow Baud-type profiles that reduce stress concentrations [ 21 ] . Despite these indications of functional optimization in nature, existing continuum theories of growth do not explicitly incorporate an optimality principle. The main aim of the present manuscript is to show how to formulate a theory of growth driven by an optimality requirement. Our formulation combines ideas from growth mechanics and structural optimization (see Bendsøe and Sigmund [ 7 ] ; Allaire et al. [ 2 ] ), providing a variational alternative to kinetic growth laws. The driving mechanism for growth is encoded in an objective functional while equilibrium, mass balance and irreversibility of deposition are imposed as constraints. Growth thus emerges as a variational selection process rather than from a pointwise evolution law. Our formulation bears some resemblance to incremental optimal-design problems for responsive structures (cf. Akerson, Bourdin, and Bhattacharya [ 1 ] and Andrini, Noselli, and Lucantonio [ 6 ] ) and to shape-programming (cf. Ortigosa-Martínez et al. [ 26 ] ), although the mechanical and variational settings differ. The emphasis of this work is not on a specific biological or physical application, but rather on the development of the underlying variational framework. For this reason, we consider a simple model: a linearly elastic cantilever beam with a rectangular cross-section whose height is allowed to grow. As shown in Section 3 , we consider a beam that “seeks” to become as rigid as possible; accordingly, growth is driven by the minimization of compliance. Within this variational perspective, we adopt a discrete-time setting, as it proves to be more transparent and

Read the complete text