Joint Segment Activation and Antenna Placement for Uplink SWAN Systems

Songnan Gu, Zhenqiao Cheng, Hao Jiang, Chongjun Ouyang · 2026

Read Joint Segment Activation and Antenna Placement for Uplink SWAN Systems by Songnan Gu, Zhenqiao Cheng, Hao Jiang, Chongjun Ouyang (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-13580.txt.

Introduction

Working with five coauthors, Songnan Gu studies the data rate of multiuser uplink SWAN systems, or segmented waveguide-enabled pinching-antenna systems. Their math sets a ceiling on that total rate, pointing to one best level for switching segments on. To reach that level while also siting the pinching antennas, the team devises picking-and-pooling methods handling both choices at once. Simple step-by-step routines carry out the joint choice without heavy computing. In tests on numbers, their methods beat the usual approach of pooling every segment.

Catalog record

CREATORSongnan Gu, Zhenqiao Cheng, Hao Jiang, Chongjun Ouyang
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27462
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.13580

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Joint Segment Activation and Antenna Placement for Uplink SWAN Systems Thanks: S. Gu, H. Jiang, C. Ouyang, and A. Nallanathan are with the School of Electronic Engineering and Computer Science, Queen Mary University of London, London E1 4NS, U.K. (e-mail: [email protected]; {hao.jiang, c.ouyang, a.nallanathan}@qmul.ac.uk). Thanks: Z. Cheng is with the 6G Research Centre, China Telecom Beijing Research Institute, Beijing 102209, China (e-mail: [email protected]). Thanks: Y. Liu is with the Department of Electrical and Electronic Engineering, The University of Hong Kong, Hong Kong (e-mail: [email protected]). Songnan Gu, Zhenqiao Cheng, Hao Jiang, Chongjun Ouyang Abstract This article analyzes the achievable sum-rate of multiuser uplink segmented waveguide-enabled pinching-antenna systems (SWANs). To unveil system-design insights, an upper bound on the achievable sum-rate is derived, based on which the existence of an optimal segment activation level is theoretically established. Motivated by this result, hybrid segment selection and aggregation (HSS/A) schemes are proposed to jointly optimize segment activation and pinching-antenna (PA) placement. Correspondingly, low-complexity greedy algorithms are developed for the considered optimization problem. Numerical results validate the theoretical analysis and demonstrate that the proposed HSS/A schemes outperform conventional full-segment aggregation. I Introduction The pinching-antenna system (PASS) has recently attracted significant attention due to their capability to mitigate large-scale path loss and blockage effects through waveguide-assisted signal transmission [ 1 , 2 ] . This feature makes PASS a promising architecture for high-frequency wireless communications, especially for the emerging upper-mid-band and millimeter-wave systems. In PASS, electromagnetic signals are guided through low-loss dielectric waveguides and are transmitted or captured through small dielectric pinching antennas (PAs) attached to the waveguide. Since the PAs can be flexibly deployed along the waveguide, PASS enables meter-scale spatial reconfiguration and can effectively shorten the free-space propagation distance [ 1 , 2 ] . Despite these advantages, uplink PASS still faces a fundamental challenge caused by inter-antenna radiation (IAR). In conventional uplink PASS, multiple PAs are simultaneously deployed on the same dielectric waveguide to receive uplink signals from different users [ 3 , 4 , 5 ] . Since each PA continuously leaks electromagnetic energy into the waveguide, the received signals may be re-radiated by other PAs before reaching the feed point. This effect introduces strong coupling among different PAs and substantially complicates the uplink signal model and receiver design [ 5 ] . To overcome this issue, the segmented waveguide-enabled pinching-antenna system (SWAN) was recently proposed in [ 5 ] . In SWAN, the long dielectric waveguide is divided into multiple independent short segments, where each segment is connected to the base station (BS) through an individual feed point; see Fig. 1 . Therefore, at most one PA is activated in each segment, which completely eliminates IAR and provides a more tractable uplink transmission architecture. Although SWAN-based transmission has recently attracted increasing research interest, the corresponding studies are still in their infancy. In our previous works [ 5 , 6 ] , the uplink sum-rate maximization problem for SWAN was investigated. Numerical results revealed an interesting non-monotonic phenomenon: activating more segments does not always improve the achievable sum-rate , although additional segments are intuitively expected to provide stronger array gain. However, this counter-intuitive phenomenon has not yet been theoretically characterized, and no transmission strategy has been developed to explicitly exploit it in system design. To fill this gap, this article investigates uplink sum-rate maximization for multiuser SWAN systems. We first derive an upper bound on the achievable sum-rate and theoretically prove the existence of an optimal segment activation level, which results from the tradeoff between coherent signal aggregation and accumulated receiver noise. Motivated by this observation, we propose a hybrid segment selection and aggregation (HSS/A) architecture, where only a subset of segments is activated for uplink signal aggregation. We further develop low-complexity greedy algorithms to jointly optimize segment activation and PA placement. Numerical results validate the theoretical analysis and demonstrate that the proposed HSS/A schemes outperform conventional full-segment aggregation. (a) Segmented waveguide. (b) System setup. Fig. 1: Illustration of the SWAN-based uplink channel. II System Model We consider a multiuser uplink SWAN system where a BS serves K users distributed within a rectangular area of dimensions D_{x} and D_{y} along the x - and y -axes, respectively. Let \mathcal{K}\triangleq\{1,\ldots,K\} denote the user set. The coordinate of user k is denoted by \mathbf{u}_{k}=[u_{k}^{x},u_{k}^{y},0]^{\mathsf{T}} . The SWAN architecture consists of M dielectric waveguide segments, each with length L , such that ML\geq D_{x} , which is illustrated in Fig. 1 . The segments are deployed along the x -axis at height d . For segment m\in\mathcal{M}\triangleq\{1,\ldots,M\} , the feed point is denoted by \bm{\psi}_{0}^{m}=[\psi_{0}^{m},0,d]^{\mathsf{T}} , where \psi_{0}^{1}<\psi_{0}^{2}<\cdots<\psi_{0}^{M} . Each feed point is located at the beginning of its corresponding segment. To eliminate IAR, at most one PA is activated in each segment. The coordinate of the active PA in segment m is denoted by \bm{\psi}_{m}=[\psi_{m},0,d]^{\mathsf{T}} . The PA locations satisfy \displaystyle\psi_{0}^{m}\leq\psi_{m}\leq\psi_{0}^{m}+L,|\psi_{m}-\psi_{m^{\prime}}|\geq\Delta,\forall m\neq m^{\prime}, (1) where \Delta>0 denotes the minimum inter-antenna spacing. II-A Channel Model PASS is envisioned for operation in high-frequency bands [ 1 ] , where line-of-sight (LoS) propagation dominates [ 7 ] . Therefore, a free-space LoS channel model is adopted. The channel coefficient between user k and the PA in segment m can be characterized as follows [ 7 ] : \displaystyle h_{\rm{o}}({\mathbf{u}}_{k},{\bm{\psi}}_{m})\triangleq\frac{\eta^{\frac{1}{2}}{\rm{e}}^{-{\rm{j}}k_{0}\lVert{\mathbf{u}}_{k}-{\bm{\psi}}_{m}\rVert}}{\lVert{\mathbf{u}}_{k}-{\bm{\psi}}_{m}\rVert}, (2) where \eta=\frac{c^{2}}{16\pi^{2}f_{c}^{2}} , c denotes the speed of light, f_{c} denotes the carrier frequency, \lambda denotes the free-space wavelength, and k_{0}=\frac{2\pi}{\lambda} denotes the wavenumber. The in-waveguide propagation coefficient between the feed point and the PA in segment m is modeled as follows [ 8 ] : \displaystyle h_{\rm{i}}({\bm{\psi}}_{m},{\bm{\psi}}_{0}^{m})\triangleq{10^{-\frac{\kappa}{20}\lVert{\bm{\psi}}_{m}-{\bm{\psi}}_{0}^{m}\rVert}}{\rm{e}}^{-{\rm{j}}\frac{2\pi\lVert{\bm{\psi}}_{m}-{\bm{\psi}}_{0}^{m}\rVert}{\lambda_{\rm{g}}}}, (3) where \lambda_{g}=\frac{\lambda}{n_{\rm eff}} , n_{\rm eff} denotes the effective refractive index of the dielectric waveguide, and \kappa denotes the in-waveguide attenuation factor. Prior studies showed that the in-waveguide attenuation has negligible impact on practical SWAN systems [ 5 ] . Therefore, we set \kappa=0 in this work. (a) Type-I SA. (b) Type-II SA. Fig. 2: Illustration of the SA-based SWAN architectures. II-B Segment Aggregation Architectures The performance of SWAN depends on how the segment feed points are connected to the RF chain. To exploit the spatial array gain provided by multiple segments, This work considers two representative SA architectures. II-B 1 Type-I SA In Type-I SA, shown in Fig. 2(a) , all segment feed points are directly connected to a single RF chain through an analog combiner. The effective uplink channel of user k can be written as follows: \displaystyle h_{k} \displaystyle=\frac{1}{\sqrt{M}}\sum_{m=1}^{M}h_{\rm i}({\bm{\psi}}_{m},{\bm{\psi}}_{0}^{m})h_{\rm o}({\mathbf{u}}_{k},{\bm{\psi}}_{m}) (4) \displaystyle=\frac{\eta^{\frac{1}{2}}}{\sqrt{M}}\sum_{m=1}^{M}\frac{{\rm{e}}^{-{\rm{j}}k_{0}(\sqrt{(u_{k}^{x}-{\psi}_{m})^{2}+d_{k}}+n_{\rm{eff}}({\psi}_{m}-{\psi}_{0}^{m}))}}{\sqrt{(u_{k}^{x}-{\psi}_{m})^{2}+d_{k}}}, (5) where d_{k}\triangleq d^{2}+(u_{k}^{y})^{2} . The factor \frac{1}{\sqrt{M}} accounts for the cumulative receiver noise introduced by analog signal combining. II-B 2 Type-II SA To further improve coherent signal combining, we also consider Type-II SA, shown in Fig. 2(b) , where each segment is additionally equipped with one analog phase shifter before RF combining. The effective uplink channel of user k becomes \displaystyle h_{k}=\frac{1}{\sqrt{M}}\sum_{m=1}^{M}{\rm e}^{{\rm j}\theta_{m}}h_{\rm i}({\bm{\psi}}_{m},{\bm{\psi}}_{0}^{m})h_{\rm o}({\mathbf{u}}_{k},{\bm{\psi}}_{m}), (6) where \theta_{m}\in[0,2\pi) denotes the phase shift applied to segment m . Substituting the channel expressions yields \displaystyle h_{k}=\sum_{m=1}^{M}\frac{\eta^{\frac{1}{2}}{\rm{e}}^{{\rm j}\theta_{m}-{\rm{j}}k_{0}(\sqrt{(u_{k}^{x}-{\psi}_{m})^{2}+d_{k}}+n_{\rm{eff}}({\psi}_{m}-{\psi}_{0}^{m}))}}{\sqrt{M}\sqrt{(u_{k}^{x}-{\psi}_{m})^{2}+d_{k}}}. (7) Type-I SA can be regarded as a special case of Type-II SA with \theta_{m}=0 for all m . II-C Signal Model The received signal at the BS is given by \displaystyle y=\sum_{k=1}^{K}\sqrt{P_{k}}h_{k}x_{k}+n, (8) where x_{k} denotes the normalized data symbol of user k satisfying \mathbbmss{E}[x_{k}]=0

Read the complete text