Impact of Terrestrial Blockage on the Coverage of Integrated Satellite-Terrestrial Networks
Joon-Young Park, Byungju Lim, Young-Chai Ko · 2026
Read Impact of Terrestrial Blockage on the Coverage of Integrated Satellite-Terrestrial Networks by Joon-Young Park, Byungju Lim, Young-Chai Ko (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-13098.txt.
Introduction
Park, Lim and Ko quantify how city blockages affect signal reach in combined satellite-ground networks for 6G. Using a stochastic geometry setup with a Boolean blockage model, they derive downlink reach odds. Blockages cut both ways: they weaken wanted signals but also shield against pooled interference. The study shows joining space and ground nets lifts reach across settings from open areas to dense urban zones. It gives a resilient and tractable route to staying connected under varied blockage.
Catalog record
| CREATOR | Joon-Young Park, Byungju Lim, Young-Chai Ko |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41969 |
| LICENSE | http://creativecommons.org/publicdomain/zero/1.0/ |
| RIGHTS | CC0 |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.13098
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Impact of Terrestrial Blockage on the Coverage of Integrated Satellite-Terrestrial Networks Joon-Young Park, Byungju Lim, Young-Chai Ko Abstract The integration of non-terrestrial networks (NTNs) with terrestrial networks (TNs) is an important step toward ubiquitous connectivity in sixth-generation (6G). Despite growing interest, the geometric impact of urban blockages on an integrated satellite–terrestrial network (ISTN) has not been rigorously quantified. In this paper, we develop a stochastic geometry-based analytical framework that incorporates a Boolean blockage model to characterize the downlink coverage probability of the ISTN and to provide insights for blockage-aware system design. Our analysis reveals that blockages affect satellite links in two competing ways: while they attenuate desired signals, they can also act as spatial shields that suppress aggregate interference. Leveraging this observation, we analytically show that satellite–terrestrial integration can enhance coverage probability across diverse environments ranging from open areas to dense urban deployments, offering a resilient and mathematically tractable approach to maintaining connectivity under heterogeneous blockage conditions. I Introduction One of the major challenges toward sixth-generation (6G) wireless systems is the provision of uninterrupted and reliable connectivity in environments where terrestrial infrastructure is either sparsely deployed or difficult to install due to geographical and economic constraints [ 1 ] . To address this challenge, non-terrestrial networks (NTNs) have emerged as a promising solution by complementing conventional terrestrial networks with aerial and spaceborne platforms. Among various NTN architectures, low Earth orbit (LEO) satellite networks have attracted significant attention as a key enabler of global coverage, owing to their relatively low altitude, which allows for reduced propagation delay, improved link budgets, and higher achievable data rates compared with traditional geostationary satellite systems [ 2 ] . However, relying on a stand-alone LEO satellite network is inherently limited in handling dense traffic demands, which motivates an integrated satellite–terrestrial architecture that jointly exploits the wide-area coverage of satellites and the high-capacity access of terrestrial networks. While most existing studies on satellite–terrestrial networks have analyzed system performance under environments where the line-of-sight (LoS) link is assumed to be dominant, this assumption does not always hold in practical scenarios, since terrestrial blockages such as skyscrapers can easily obstruct the direct signal path and convert it into a non-line-of-sight (NLoS) link. Therefore, it is reasonable, and indeed necessary, to evaluate the performance of an integrated satellite–terrestrial network (ISTN) while explicitly accounting for the presence of such blockages and the resulting coexistence of LoS and NLoS propagation conditions. Fig. 1: Illustration of integrated satellite-terrestrial network (ISTN). The typical user is located at (0,0,R_{\textnormal{E}}) and the satellites are deployed in the spherical cap \mathcal{A} . Terrestrial base stations (TBSs) and the terrestrial blockages are distributed on the Earth while accounting for the Earth’s curvature. Stochastic geometry has been widely adopted as a powerful analytical tool to evaluate the performance of wireless communication networks [ 3 ] . In addition, the effect of the blockage on the coverage of these networks has also been investigated in previous works [ 4 , 5 , 6 ] . However, to the best of our knowledge, the impact of terrestrial blockages on the joint performance of the two heterogeneous layers in an ISTN has not yet been rigorously investigated. Motivated by this gap, in this paper we analyze the downlink performance of an ISTN in the presence of terrestrial blockages and quantify how such blockages affect the behavior of this hybrid network. The main contributions of this paper are summarized as follows: • We develop a unified stochastic geometry-based analytical framework for downlink coverage analysis of ISTN under a terrestrial blockage-based environment modeled by a Boolean scheme. • By explicitly accounting for the curvature of the Earth, we derive a geometric blockage condition for satellite links and obtain a curvature-dependent scaling factor, which leads to a tractable characterization of the LoS satellite process and the satellite-layer coverage probability in the presence of terrestrial blockages. • Under a local planar approximation for the terrestrial layer with distance-dependent LoS/NLoS propagation and co-channel interference, we characterize terrestrial downlink coverage and quantify the overall ISTN coverage gain achievable via satellite-terrestrial integration, identifying regimes where integration improves reliability compared to single-network operation. II System model II-A Network Model We consider a downlink ISTN as illustrated in Fig. 1. The Earth and the satellite shell are embedded in three-dimensional Euclidean space \mathbb{R}^{3} , both centered at the origin \mathbf{0} , with radii R_{\mathrm{E}}\approx 6371~\mathrm{km} and R_{\mathrm{S}} , respectively. Given a satellite altitude h , the radius of the satellite sphere is defined as R_{\mathrm{S}}=R_{\mathrm{E}}+h . Each satellite location is denoted by \mathbf{x} and represented in spherical coordinates as \mathbf{x}\triangleq(R_{\mathrm{S}},\varphi,\vartheta),~0\leq\varphi\leq 2\pi,~0\leq\vartheta\leq\pi. (1) where \varphi and \vartheta are the azimuth angle and the polar angle, respectively. The satellites are modeled as a homogeneous spherical Poisson point process (SPPP) on the sphere with density \lambda_{\mathrm{S}} , and the set of satellite locations is denoted by \Phi_{\mathrm{S}}=\{\mathbf{s}_{1},\mathbf{s}_{2},\cdots,\mathbf{s}_{N}\} . Similarly, downlink users are distributed on the Earth, following a homogeneous SPPP with density \lambda_{\mathrm{U}} , and defined as \Phi_{\mathrm{U}}=\{\mathbf{u}_{1},\mathbf{u}_{2},\cdots,\mathbf{u}_{M}\} . Without loss of generality, by Slivnyak’s theorem [ 8 ] , we assume that the typical user \mathbf{u}_{1} is located at (0,0,R_{\mathrm{E}}) . We define the spherical cap \mathcal{A} as the portion of the satellite shell above a tangent plane centered at the typical user. Accordingly, the number of visible satellites N_{\mathrm{S}} follows a Poisson distribution with mean \mathbb{E}[N_{\mathrm{S}}]=\lambda_{\mathrm{S}}|\mathcal{A}|=\lambda_{\mathrm{S}}2\pi R_{\mathrm{S}}(R_{\mathrm{S}}-R_{\mathrm{E}}) . For each satellite within the visible spherical cap \mathcal{A} , let \theta_{\mathrm{S}}\in[0,\pi/2] denote its elevation angle with respect to the typical user. Consequently, the link distance ranges from R_{\min}=R_{\mathrm{S}}-R_{\mathrm{E}} at zenith, to R_{\max}=\sqrt{R_{\mathrm{S}}^{2}-R_{\mathrm{E}}^{2}} at horizon. Alternatively, the satellite position can be characterized by the geocentric angle \psi_{\mathrm{S}} , defined as the angle at the Earth’s center between the position vectors of the typical user and the satellite. Using simple geometric relations, the elevation angle \theta_{\mathrm{S}} and the geocentric angle \psi_{\mathrm{S}} are related as \theta_{\mathrm{S}}=\arctan\left(\frac{R_{\mathrm{S}}\cos\psi_{\mathrm{S}}-R_{\mathrm{E}}}{R_{\mathrm{S}}\sin\psi_{\mathrm{S}}}\right). (2) The terrestrial base stations (TBSs) are distributed on the Earth according to a homogeneous spherical PPP with density \lambda_{\mathrm{T}} , denoted by \Phi_{\mathrm{T}}=\{\mathbf{t}_{1},\mathbf{t}_{2},\cdots,\mathbf{t}_{Q}\} . Each TBS is mounted on a thin, pole-like structure of height h_{\mathrm{TBS}} and is therefore not treated as a geometric blockage. Although TBSs are deployed on the Earth, terrestrial links span distances much smaller than R_{\mathrm{E}} ; hence, in the performance analysis we approximate the neighborhood of the typical user by the local tangent plane and use a planar PPP model for the terrestrial layer. Finally, terrestrial blockages are assumed to be deployed on the Earth, obstructing signal links between the typical user and satellites or TBSs. These blockages are modeled using a Boolean scheme with rectangular footprints [ 4 ] . The blockage centers form a homogeneous PPP, denoted by \Phi_{\mathrm{B}} with intensity \lambda_{\mathrm{B}} . Each blockage is characterized by its footprint dimensions (L_{\mathrm{B}},W_{\mathrm{B}}) , orientations \Theta_{\mathrm{B}} . The lengths L_{\mathrm{B}} and the widths W_{\mathrm{B}} are independent and identically distributed (i.i.d.) positive random variables with probability density functions (PDFs) f_{L_{\mathrm{B}}}(\cdot) and f_{W_{\mathrm{B}}}(\cdot) , respectively. The orientations \Theta_{\mathrm{B}} follow a uniform distribution over [0,2\pi) , while the blockage height h_{\mathrm{B}} follows a Rayleigh distribution. II-B Channel Model The received signal power from a TBS q\in\Phi_{\mathrm{T}} to the typical user \mathbf{u}_{1} is given by P_{\mathrm{T},q}=P_{t,\mathrm{T}}G_{\mathrm{T,q}}H_{\mathrm{T},q}\|\mathbf{t}_{q}-\mathbf{u}_{1}\|^{-{\alpha}_{\mathrm{T}}}, (3) where P_{t,\mathrm{T}} denotes the transmit power of the TBS,