Ordering governs magnetic tunability in FePt-based Janus particles independent of curvature

Natalia Gonzalez-Vazquez, Eylül Suadiye, Eberhard Goering, Ruben O. Miranda-Rosales, Hilda David, Frank Thiele, Julia Unangst, Andrew K. Schulz, Gunther Richter · 2026

Read Ordering governs magnetic tunability in FePt-based Janus particles independent of curvature by Natalia Gonzalez-Vazquez, Eylül Suadiye, Eberhard Goering, Ruben O. Miranda-Rosales, Hilda David, Frank Thiele, Julia Unangst, Andrew K. Schulz, Gunther Richter (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-12283.txt.

Introduction

Natalia Gonzalez-Vazquez and eight colleagues ask whether size still tunes magnet pull in micrometer Janus particles. They make FePt caps on silica spheres 3 to 10 microns wide, stretching to 1 to 20 microns in simulations. Across that range, holding force, rest pull, and loop shape show no size link. The length ratio, near ten to the minus three to ten to the minus four, places them there. Size and response are split: diameter can serve payload and safety needs with no penalty. But size cannot tune pull flip, which follows matter.

Catalog record

CREATORNatalia Gonzalez-Vazquez, Eylül Suadiye, Eberhard Goering, Ruben O. Miranda-Rosales, Hilda David, Frank Thiele, Julia Unangst, Andrew K. Schulz, Gunther Richter
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39380
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.12283

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ordering governs magnetic tunability in FePt-based Janus particles independent of curvature Natalia Gonzalez-Vazquez, Eylül Suadiye, Eberhard Goering, Ruben O. Miranda-Rosales, Hilda David, Frank Thiele, Julia Unangst, Andrew K. Schulz, Gunther Richter Abstract Magnetic Janus particles enable remote actuation across biomedical, microfluidic, and materials applications. While curvature-driven magnetic effects are well established at the nanoscale, their influence on magnetization reversal at micrometer-scale particle sizes remains unresolved. Here, we combine experiment and micromagnetic simulation to investigate curvature-dependent magnetism (i.e., diameter-dependent changes in magnetic response) in FePt-coated Janus particles across diameters of 3–10 μ \mu m, and extended to 1–20 μ \mu m via micromagnetic simulations. Structural and crystallographic characterization confirms continuous coatings with near-equiatomic composition and partial L ​ 1 0 L1_{0} ordering. Magnetometry measurements reveal nearly invariant hysteresis behavior as a function of particle diameter ( μ 0 ​ H c = 1.13 ± 0.05 \mu_{0}H_{c}=1.13\pm 0.05 T, pooled n = 8), with no statistically significant dependence of coercivity or remanence on diameter (statistical analysis, p = 0.61 p=0.61 for H c H_{c} , p = 0.85 p=0.85 for M r / M s M_{r}/M_{s} ). To interpret these results, we introduce FunMaP , an open-source micromagnetic simulation framework enabling direct comparison between experiment and idealized FePt caps. Simulations show that curvature does not significantly influence magnetization reversal in this regime, consistent with a locally planar limit (exchange length ℓ ex ≪ R \ell_{\mathrm{ex}}\ll R ). In contrast, variations in chemical ordering produce substantial changes in hysteresis shape and coercivity. These results show that, at micrometer scales, magnetic behavior in FePt Janus particles is governed primarily by material ordering rather than curvature. This work defines a quantitative regime boundary for curvature-dependent magnetism and provides design guidelines for programmable magnetic micro-systems. + these authors co-supervised this work Corresponding author: Natalia Gonzalez-Vazquez Heisenbergstraße 3, 70569 Stuttgart, Germany [email protected] Keywords: Janus particles; FePt thin films; micromagnetics; curvature effects; magnetic anisotropy; solid-state dewetting 1 Introduction Asymmetric magnetic coatings on colloidal particles have enabled a wide range of functional systems, including field-driven actuation, directed assembly, and biomedical microrobots 1 ; 2 ; 3 ; 4 ; 5 . Among these, Janus particles, characterized by two chemically or physically distinct hemispheres, are particularly attractive due to their inherent structural anisotropy, which allows precise directional control under external magnetic perturbations 1 . When coated with magnetic thin films, these particles combine geometric asymmetry with functional programmability, enabling applications in targeted drug delivery, microscale transport, and diagnostic imaging 2 ; 3 ; 6 . Iron–platinum (FePt) based coatings are especially promising in this context due to their high magnetocrystalline anisotropy ( K_{u}\approx 6.6\times 10^{6} J/m 3 ), thermal stability, and biocompatibility 7 ; 8 ; 9 . In its chemically ordered L1_{0} phase, FePt exhibits strong uniaxial anisotropy, making it a model system for studying magnetization reversal in confined and curved geometries 7 ; 10 ; 11 ; 12 ; 13 . As a result, FePt Janus caps have emerged as a platform for programmable magnetic micro-agents 2 ; 14 . Within this framework, two primary variables can, in principle, be used to control magnetic behavior: geometry and material structure (here referring to chemical ordering and microstructure). In curved magnetic shells, curvature is expected to introduce effective anisotropies and curvature-induced exchange terms, which can modify domain wall structure, switching fields, and chirality 15 ; 16 ; 17 ; 18 . This has led to the widespread assumption that curvature can act as a tuning knob for magnetization reversal. In parallel, the field of curvilinear magnetism has demonstrated that curvature can directly reprogram magnetic behavior in nanoscale systems 19 ; 20 ; 21 ; 22 . When the radius of curvature ( R=d/2 , where d is the particle diameter) approaches intrinsic magnetic length scales such as the exchange length ( \ell_{\mathrm{ex}} , the characteristic length scale over which exchange interactions maintain spin alignment, defined as \ell_{\mathrm{ex}}=\sqrt{2A/\mu_{0}M_{s}^{2}} ), curvature introduces additional geometric terms into the micromagnetic energy functional 15 ; 18 . These contributions manifest as effective anisotropies, modified exchange interactions, and chiral spin textures, motivating the use of the thickness-to-radius ratio ( t/R ) as a design parameter 19 ; 16 ; 21 . However, a key open question is whether curvature retains this role at the micrometer scale relevant to most functional Janus systems. While curvature-driven effects are well established for radii in the tens to hundreds of nanometers, most biomedical Janus particles operate in the 1–20 \mu m range 1 ; 6 . For L1 0 FePt, the exchange length is \ell_{\mathrm{ex}}\approx 3 –5 nm, while the particle radii considered here span particle diameters of 1–20 \mu m (corresponding to radii R=0.5 –10 \mu m). This yields \ell_{\mathrm{ex}}/R\sim 10^{-3} – 10^{-4} , placing the system deep within the locally planar regime 19 ; 21 . In this limit, it remains unclear whether curvature continues to act as an independent control parameter for magnetization reversal, or whether magnetic behavior is instead dominated by extrinsic factors introduced during processing. Here, we investigate the interplay between geometric curvature and material ordering in FePt Janus particles across experimentally accessible diameters (3–10 \mu m), extended to 1–20 \mu m in simulation. By combining superconducting quantum interference device (SQUID) magnetometry and structural characterization (scanning electron microscopy (SEM), X-ray diffraction (XRD)) with the open-source simulation toolkit FunMaP , we isolate the role of the thickness-to-radius ratio ( t/R ) from the effects of chemical ordering. We demonstrate that magnetization reversal in ideal FePt caps is largely insensitive to micrometer-scale curvature. Instead, deviations observed experimentally arise from diffusion-driven structural evolution, including incomplete L1_{0} ordering and early-stage solid-state dewetting, which are indirectly influenced by particle diameter during annealing 23 ; 24 ; 25 ; 26 . In this context, it is important to distinguish between curvature as a configurational constraint (setting anisotropy distribution) and curvature as a tunable parameter (producing diameter-dependent behavior). These results establish that, in this regime, material structure, not curvature, acts as the dominant tuning knob for magnetic functionality. 2 Results and Discussion We establish a reproducible workflow for the synthesis of FePt-coated Janus particles, followed by structural and magnetic validation using SEM, XRD, and SQUID magnetometry. As summarized in Figure 1 , this workflow connects fabrication, structural characterization, magnetic measurements, and micromagnetic simulations within a single framework. This integrated approach allows a direct comparison between ensemble-averaged experimental behavior and idealized single-particle simulations, enabling intrinsic curvature effects to be separated from processing-induced structural variations 27 . A central question in the field of curvilinear magnetism is whether geometric curvature can act as an independent control parameter for magnetization reversal 15 ; 19 ; 21 ; 18 . The following sections explicitly test this assumption at the micrometer scale. Throughout this work, “curvature effects” refer specifically to diameter-dependent changes in magnetic response, distinguishing them from curvature-imposed anisotropy configurations that are invariant across diameter. 2.1 Workflow for FePt Janus caps across curvatures To probe curvature-dependent behavior, monodisperse SiO 2 spheres with diameters of 3, 5, 8, and 10 \mu m were assembled into near-monolayers via drop-casting of diluted 5% (w/v) suspensions. The dilution factor was adjusted according to geometric packing considerations to ensure comparable surface coverage across all particle sizes 28 . As illustrated schematically

Read the complete text