High-lift Wing Separation Control via Bayesian Optimization and Deep Reinforcement Learning

R. Montalà 1, B. Font 2, O. Lehmkuhl 3, R. Vinuesa 4 and I. Rodriguez 1 · 2026

Read High-lift Wing Separation Control via Bayesian Optimization and Deep Reinforcement Learning by R. Montalà 1, B. Font 2, O. Lehmkuhl 3, R. Vinuesa 4 and I. Rodriguez 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-11981.txt.

Introduction

Ricard Montalà and four colleagues test active flow control on a 30P30N high-lift wing at Reynolds number 450,000 and 23 degrees angle of attack. Using wall-resolved large-eddy simulations, they compare open-loop Bayesian optimization with closed-loop deep reinforcement learning through synthetic jets on slat, main, and flap elements. Bayesian optimization raised efficiency 10.9 percent via a 9.7 percent drag cut while holding lift, while the reinforcement learning agent gained almost nothing, its penalty-dominated reward stifling exploration.

Catalog record

CREATORR. Montalà 1, B. Font 2, O. Lehmkuhl 3, R. Vinuesa 4 and I. Rodriguez 1
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42806
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.11981

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

High-lift Wing Separation Control via Bayesian Optimization and Deep Reinforcement Learning R. Montalà 1, B. Font 2, O. Lehmkuhl 3, R. Vinuesa 4 and I. Rodriguez 1 Abstract This study investigates active flow control (AFC) of a 30P30N high-lift wing at a Reynolds number R ​ e c = 450,000 Re_{c}=450{,}000 and angle of attack α = 23 ∘ \alpha=23^{\circ} using wall-resolved large-eddy simulations (LES). Two optimization strategies are explored: open-loop Bayesian optimization (BO) and closed-loop deep reinforcement learning (DRL), both targeting the mitigation of stall and the improvement of aerodynamic efficiency via synthetic jets on the slat, main, and flap elements. The uncontrolled configuration was validated against literature data, confirming the reliability of the LES setup. The BO framework successfully identified steady jet velocities that increased efficiency by +10.9% through a -9.7% drag reduction while maintaining lift. In contrast, the DRL agent, despite leveraging instantaneous flow information from distributed sensors, achieved only minor improvements in lift and drag, with negligible efficiency gain. Training analysis indicated that the penalty-dominated reward constrained exploration. These results highlight the need for carefully designed rewards and computational acceleration strategies in DRL-based flow control at high Reynolds numbers. 1 Introduction High-lift wing configurations are essential for modern transport aircraft during take-off and landing, when multi-element devices such as slats and flaps are deployed to generate lift at low airspeeds. Their deployment, however, introduces complex flow phenomena, including separation in slat and cove regions and wake interactions between wing elements. Aircraft performance metrics such as runway distance, climb rate, payload capacity, and noise emissions are therefore strongly influenced by high-lift aerodynamics [ 32 ] , making accurate understanding and control of these flows critical for efficient and reliable aircraft design. The 30P30N high-lift configuration, originally developed by McDonnell Douglas, is a widely used benchmark for the aerodynamics and aeroacoustics of multi-element wings. Introduced in the NASA high-lift prediction workshop [ 11 ] , early studies combined experiments and RANS simulations to assess predictive capabilities. The configuration later became a reference for aeroacoustic investigations within the AIAA BANC-III workshop [ 3 ] , focusing on tonal noise generated by shear-layer impingement in the slat cove at the Reynolds number Re_{c}=1.7\times 10^{6} and angle of attack \alpha=5.5^{\circ} [ 22 , 1 ] . The Reynolds number is defined as Re_{c}=U_{\infty}c/\nu , with \nu being the fluid kinematic viscosity, U_{\infty} the freestream velocity, and c the chord of the wing. For high-lift wings, c refers to the nested chord. More recently, the 30P30N has been used to evaluate advanced numerical methods, including high-order schemes [ 5 ] , mesh refinement techniques [ 33 ] , and hybrid RANS/LES approaches [ 29 ] . Recent high-fidelity LES studies have further shown that, at high angles of attack, stall originates from shear-layer separation between the main and flap elements [ 16 , 17 ] , providing a detailed baseline for flow-control studies. To mitigate stall, active flow control (AFC) has emerged as a promising technique to manipulate wing flows and enhance aerodynamic performance. Among various AFC methods, synthetic jets, characterized by zero net mass flux, have received significant attention due to their effectiveness in controlling flow separation. Numerical studies have shown that synthetic jets can delay stall and improve efficiency at high angles of attack by mitigating large-scale separation [ 37 , 26 ] . Their applicability has been extended from single-element airfoils to high-lift wing configurations, both experimentally [ 15 ] and numerically [ 28 ] . More recently, Lehmkuhl et al. [ 12 ] performed wall-modeled LES on a complete aircraft (JSM model) under stall conditions, demonstrating the feasibility of AFC at full scale. Nevertheless, selecting optimal AFC parameters remains a significant challenge due to the complex, nonlinear nature of flow dynamics. In recent years, machine learning (ML) has attracted increasing attention, and its combination with AFC has opened new possibilities. In particular, deep reinforcement learning (DRL) has shown potential as a methodology capable of discovering complex actuation strategies to enhance aerodynamic performance. Rabault et al. [ 24 ] pioneered this approach, achieving drag reduction on a two-dimensional cylinder at Re_{D}=100 (based on the cylinder diameter D ). Building on this, Rabault and Kuhnle [ 25 ] introduced multi-environment training strategies to improve learning efficiency and scalability to higher Reynolds numbers. More recently, Suárez et al. [ 31 , 30 ] extended DRL to three-dimensional cylinders, achieving significant drag reduction at Re_{D}=3,900 . Beyond bluff body control, DRL has also been applied to reduce skin friction in wall-bounded turbulence [ 9 ] and to three-dimensional Rayleigh-Bénard flows [ 34 ] , the former representing the first successful DRL study to control turbulence. However, applications to airfoils and wings remain limited, mostly focusing on two-dimensional geometries at low Reynolds numbers [ 36 , 6 ] . More recently, our group has demonstrated the potential of combining DRL with a GPU-accelerated CFD solver [ 4 ] . This approach achieved improved performance for a NACA 0012 wing at Re_{c}=1{,}000 [ 18 ] and an SD7003 wing at Re_{c}=60{,}000 [ 19 ] , highlighting the promise of this methodology for more complex configurations. Another data-driven methodology to tackle optimization problems is Bayesian optimization (BO). This approach has proven robust in fluid mechanics. Morita et al. [ 20 ] applied BO to a range of shape optimization problems, Mahfoze et al. [ 14 ] used it to reduce skin-friction drag in a turbulent boundary layer via optimum blowing amplitude, Han et al. [ 10 ] reduced the drag coefficient of a cylinder at Re_{D}=200 by selecting appropriate steady tangential velocities along the surface, and Li et al. [ 13 ] enhanced the jet mixing by optimizing multiple actuation inputs in both the bulk flow and nozzle periphery. Although less advanced than DRL a priori, as it typically relies on fixed control parameters rather than producing a closed-loop control strategy, BO remains an efficient and reliable tool for identifying high-performance configurations. The present study focuses on the 30P30N geometry at \alpha=23^{\circ} and Re_{c}=450{,}000 , conditions where stall separation dominates the flow. The objective is to apply an AFC strategy that mitigates this separation and thus improves the wing performance. Two optimization approaches are employed: BO, which systematically explores the actuation parameter space to identify optimal configurations, and DRL, which enables the autonomous discovery of complex, time-dependent control strategies that adapt to the evolving flow dynamics. 2 Methodology In this study, wall-resolved LES are performed for the flow over the 30P30N high-lift wing at a Reynolds number of Re_{c}=450{,}000 and an angle of attack of \alpha=23^{\circ} . The objective is to evaluate the effectiveness of synthetic jets in mitigating stall conditions. Two optimization strategies are employed to determine the optimal jet mass flow rate: (i) a classical BO approach, and (ii) a more novel method based on DRL. The Reynolds number has been slightly reduced compared to values reported in the literature to decrease the computational cost of the simulations without altering the flow physics. 2.1 CFD solver The CFD simulations are performed by solving the filtered incompressible Navier-Stokes equations: \displaystyle\frac{\partial\bar{u_{i}}}{\partial x_{i}}=0\;, (1) \displaystyle\frac{\partial\bar{u_{i}}}{\partial t}+\frac{\partial}{\partial x_{j}}(\bar{u}_{i}\bar{u}_{j})-\nu\frac{\partial^{2}\bar{u}_{i}}{\partial{x_{j}}\partial{x_{j}}}+\frac{1}{\rho}\frac{\partial\bar{p}}{\partial x_{i}}=-\frac{\partial\tau_{ij}}{\partial x_{j}}\;, (2) where \overline{u}_{i} ( i=1 , 2 , 3 ) and \overline{p} denote the filtered velocity and

Read the complete text