Energy Consumption in Next Generation Radio Access Networks

Urooj Tariq, Rishu Raj, Merim Dzaferagic and Dan Kilper · 2026

Read Energy Consumption in Next Generation Radio Access Networks by Urooj Tariq, Rishu Raj, Merim Dzaferagic and Dan Kilper (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-11899.txt.

Introduction

Urooj Tariq and three colleagues examine energy use in next-generation radio access networks through transaction-based models updated with modern hardware. They find efficiency gains have largely followed semiconductor trends, and emerging open RAN architectures improve energy per bit even as processing becomes the largest contributor. Densification raises total energy, while the split between processing and transport energy depends strongly on where baseband processing sits.

Catalog record

CREATORUrooj Tariq, Rishu Raj, Merim Dzaferagic and Dan Kilper
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE45882
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.11899

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Energy Consumption in Next Generation Radio Access Networks Urooj Tariq, Rishu Raj, Merim Dzaferagic and Dan Kilper Abstract The radio access network (RAN) accounts for the largest share of energy consumption in mobile networks, making it essential to understand how and where this energy is used, particularly as future networks move toward higher levels of densification. Open radio access networks (O-RAN) have emerged as a promising approach to support this evolution through open interfaces that enable a multivendor environment, support for hierarchical intelligent controls, and simplified, cost-effective radio units that facilitate large-scale deployments. This paper examines the energy consumption in next-generation RAN architectures through transaction-based energy models. The model captures both processing and transmission energy components and evaluates how energy use varies with the placement of baseband processing (BBP) across network nodes and with different levels of network densification. Results indicate that processing energy dominates total consumption and that the location of BBP strongly influences overall energy efficiency. These insights can inform the design of future RAN deployments that balance flexibility, cost, and sustainability. CONNECT Centre, Trinity College Dublin, Ireland. Email: {tariqu, rajr, merim.dzaferagic, dan.kilper}@tcd.ie I Introduction Communication networks have evolved from systems primarily designed for human communication to infrastructures increasingly dominated by connected devices. While billions of people continue to use the network for everyday services, an even larger number of devices are now connected, generating and exchanging data autonomously. This evolution has driven a transition towards a world in which the number of connected devices exceeds the human population, creating significant challenges in terms of scalability, latency, and energy efficiency. According to estimates, there are between 25 to 50 billion devices being used, which produce 79.4 zettabytes of data annually [ 11 ] . In 2023, 65.7% of the global population [ 2 ] was using the Internet for applications with diverse service requirements, including high data rates, low latency, and high mobility. The development of the fifth generation (5G) standard introduced a new paradigm that aimed to address these diverse performance requirements by defining three service categories: enhanced mobile broadband (eMBB), ultra-reliable low latency communication (URLLC), and massive machine type communication (mMTC). However, as deployment progressed, it became clear that the boundaries between these categories were not distinct, since emerging applications often require multiple capabilities simultaneously. Consequently, research for sixth generation (6G) networks is focusing on developing an AI-native architecture, where artificial intelligence is embedded into the network design to enable real-time adaptation to dynamic vertical requirements and service conditions. This increased reliance on virtualization and software-defined control has also benefited the development of open networking standards such as the open radio access network (O-RAN) specification (www.o-ran.org). O-RAN defines open and interoperable interfaces that allow a multivendor environment and enable intelligent control and management applications, which in the future are expected to rely heavily on AI methods. Its architecture disaggregates the network into radio units, and distributed and centralized processing units, simplifying the deployment of cost-efficient radio units that are well-suited for dense network scenarios expected in future 6G systems. The exponential growth of Internet traffic has frequently drawn concern over the potential for a rapid expansion of equipment deployments and corresponding increases in energy use. Much attention was focused on this more than a decade ago, when it was first recognized that the energy efficiency improvements in network equipment were slowing and not keeping up with traffic growth [ 13 ] . In order for traffic to scale exponentially, the network equipment efficiency, measured in energy per bit (transported), must reduce exponentially. This scaling requirement was originally met by scaling the transmission speeds or capacity exponentially, with little to no increase in power consumption. This capacity-based scaling slowed as both wireless and then wireline systems approached the Shannon capacity limits. At the same time, electronic processors used in network equipment were facing their own scaling challenges due to the ’one volt wall’ and other changes that slowed the energy efficiency improvements associated with Moore’s Law [ 7 ] . These studies predicted significant increases in network equipment energy use over time. As a result, one would expect that with the speed and capacity increases of networking equipment of the past decade, since those studies, the energy use and thermal density of telecommunications equipment have shown a significant increase. In fact, the most recent generation of 800G optical transceivers is being offered with liquid cooling in order to address the high thermal densities [ 14 ] . The impact of these equipment efficiency trends on actual commercial network energy use is complicated due to the relative mix of legacy and new equipment deployments and efficiencies in business operations specific to each operator. Nevertheless, a number of studies have found evidence of industry-wide network sector increases in electricity use, even growing faster than computers and data centers [ 15 ] . The global climate crises, likewise have significantly shifted our attention towards scrutinizing, discussing, and reducing the energy consumption and carbon footprint of the information and communication technology (ICT) sector, which was 1.27 Gt of carbon dioxide emissions ( \text{CO}_{\text{2e}} ), or 2.3 % of global emissions in 2020. Fig. 1: Energy consumption per user in access switches over time with a technology improvement rate of 20%. These trends motivate a re-examination of the energy use that has occurred since those previous predictions to determine whether the predicted rates of increase have borne out. Ethernet switches are an important category of network equipment that depend strongly on semiconductor scaling and have not seen a significant shift in their architecture or use. Assuming semiconductor scaling is the dominant contributor to energy use, an exponential time-dependent model has been used for the prediction of energy consumption (or energy per bit) expressed as E(t)=E_{\text{0}}(1-\mu)^{t-t_{0}} where \mu is the annual rate of technological improvement, E_{0} is the energy consumption of the access switches at t_{0} . In previous studies, the technology improvement rate was expected to continue at 20% per annum [ 3 ] . We carried out an analysis of a family of Ethernet switches from a common vendor developed for access and aggregation networks. Using a single vendor and switch family ensures that design changes and vendor differences are not a major factor. In Fig. 1 , we show the energy consumption of these access and aggregation switches based on public datasheets from the year 2008 to 2023. We also show a linear trend on the log-linear scale corresponding to \mu = 0.2, with an R^{2} of 0.848 in the log-domain. This indicates good agreement with the observed data and corroborates previous predictions, while also supporting the use of \mu=0.2 as a representative value. Understanding the energy consumption of network equipment is complex and has been approached through several different methods. The most commonly used method is a so-called ‘top-down’ economic-based model that estimates the overall network power consumption from publicly reported network operator business operations figures or equipment sales figures [ 12 ] . This gives an accurate indication of energy use for the sector overall, but does not provide insights into how the network is configured or operated in order to arrive at the total energy consumption numbers, which might include legacy equipment or redundant deployments. In order

Read the complete text