Nano-Clay-Stabilized Water-in-Oil Colloidal Pickering Emulsions as Thixotropic Lubricant

Arun Kumar, a Rahul Yadav, b Yogesh M. Joshi, b∗ Manjesh K. Singh a · 2026

Read Nano-Clay-Stabilized Water-in-Oil Colloidal Pickering Emulsions as Thixotropic Lubricant by Arun Kumar, a Rahul Yadav, b Yogesh M. Joshi, b∗ Manjesh K. Singh a (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-11004.txt.

Introduction

Arun Kumar, Rahul Yadav, Yogesh M. Joshi, and Manjesh K. Singh develop a nano-clay-stabilized water-in-oil emulsion as an environmentally gentler lubricant. Conventional mineral-oil lubricants struggle to combine lubrication with heat dissipation, and the team builds their emulsion on sunflower oil with Garamite clay.

Raising clay loading lifts yield stress and strengthens shear-thinning and thixotropic behavior, the reversible structuring that lets the fluid remember recent flow. Against steel-on-steel contacts under high pressure, the best emulsion cuts friction by roughly 41 percent against oil and 84 percent against water, with wear down by about 80 and 96 percent. Lubrication engineers get a plant-oil emulsion whose microstructure tunes its own friction.

Catalog record

CREATORArun Kumar, a Rahul Yadav, b Yogesh M. Joshi, b∗ Manjesh K. Singh a
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE71766
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.11004

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Nano-Clay-Stabilized Water-in-Oil Colloidal Pickering Emulsions as Thixotropic Lubricant Arun Kumar, a Rahul Yadav, b Yogesh M. Joshi, b∗ Manjesh K. Singh a Abstract The limitations of conventional mineral oil–based lubricants motivate the development of environmentally benign emulsions capable of providing lubrication and heat dissipation in demanding applications. In this study, nano-organoclay (Garamite 1958 ® )-stabilized thixotropic water-in-oil Pickering emulsions are developed using sunflower oil as the base. The rheological and tribological properties of the emulsion system are systematically examined. Rheological findings reveal a pronounced increase in yield stress, shear thinning and thixotropic behavior on increasing Garamite loading percentage in the emulsion. The tribological performance is assessed against dry, water, and oil-lubricated conditions for a steel–steel interface under high contact pressure. The findings indicate that the tribological performance is significantly influenced by the microstructure and thixotropic behavior of the emulsions. The emulsion with the optimal nano-clay concentration demonstrates approximately 41% and 84% lower friction and approximately 80% and 96% lower wear than oil and water, respectively. The emulsion exhibits sensitivity to the sliding direction and displays load-responsive friction behavior with a memory effect owing to the reversible structuring of the clay–droplet network. This superior performance is attributed to the combined effects of thixotropy, anisotropic nanoclay morphology, and stable droplet armoring, which form a robust and adaptive interfacial film. This study advances the understanding of Pickering emulsions in metallic tribosystems by correlating the microstructure and rheology with tribological performance, thereby facilitating the design of high-performance, smart, and eco-conscious lubricants for metallic systems. I Introduction Conventional mineral oil-based lubricants raise environmental concerns Singh 2022 . Water is environmentally friendly, inexpensive and has low shear resistance and high thermal conductivity. However, its poor pressure–viscosity response limits its load-bearing capacity and restricts its direct use as a lubricant Singh et al. 2015 . Therefore, emulsions that function as both lubricants and coolants are widely used in metal processing and heavy-duty engineering applications Chen et al. 2022 ; Bao et al. 2022 . Pickering emulsions offer advantages over conventional surfactant-stabilized emulsions, such as low toxicity, higher stability, cost-effectiveness, and ease of recovery Liu et al. 2024 . Although Pickering emulsions are extensively used in food Du et al. 2025 ; Feng et al. 2025 ; Du and Meng 2025 ; Lu et al. 2021a , biomedical Guo et al. 2025 ; Dai et al. 2023 ; Xia et al. 2025 ; Zhang et al. 2025a ; Guan et al. 2026 ; Yao et al. 2025 and 3D/4D printing Yu et al. 2024 ; Wu et al. 2021 ; Zhang et al. 2024 , their tribological applications, particularly under hard contact conditions Chen et al. 2022 ; Liu et al. 2024 ; Wu et al. 2024 ; Yu et al. 2024 ; Zhang et al. 2025b ; Wu et al. 2017 ; Yang et al. 2019 ; Xu et al. 2025 remain limited. In tribology, Pickering emulsions are primarily employed either as templates for fabricating antiwear composites or directly as lubricants Bao et al. 2022 . Their superior performance arises from mechanisms such as repairing effects Liu et al. 2024 , strong tribofilm formation, ball-bearing action Yu et al. 2024 and interlayer sliding in layered particles Xu et al. 2025 . In addition to these well-recognized mechanisms, the role of thixotropy in enhancing the lubrication performance of aqueous thixotropic gels has been highlighted in our previous studies Kumar et al. 2024a ; Kumar et al. 2025 . In thixotropic systems, the viscosity decreases owing to microstructural breakage under the influence of a deformation field (shear flow). Upon cessation of the flow, the viscosity recovers owing to microstructure buildup over time. Such rapid microstructural adaptation to changing shear conditions is advantageous for lubrication under varying conditions of load, speed, and direction of motion. Pickering emulsion stabilizers range from natural to synthetic particles with diverse morphologies. They include graphene oxide Yu et al. 2024 ; Wu et al. 2017 , silica particles Chen et al. 2022 ; Guan et al. 2026 ; Yao et al. 2025 , metal–organic framework nanoparticles Li et al. 2025 , ZnO particles Liu et al. 2024 ; Cionti et al. 2022 , magnetic particles Chen et al. 2022 ; Liu et al. 2024 , polymer Yu et al. 2024 ; Silmore et al. 2016 , proteins You et al. 2023 , cellulose Bertsch et al. 2025 , quantum dots Huang et al. 2025 , Janus particle/nanotubes Zhao et al. 2025 and clay nanoparticles Liu et al. 2024 ; Stehl et al. 2020 ; Merad et al. 2021 ; Assunção Dorigon et al. 2025 ; Kang et al. 2024 . Nanoclays, as renewable and sustainable materials, have gained significant attention. Their high surface activity and strong interfacial affinity enable efficient adsorption at oil–water interfaces, making them effective stabilizers for Pickering emulsions Lu et al. 2021b ; Lisuzzo et al. 2022 . These emulsions have been applied in water-based drilling fluids Assunção Dorigon et al. 2025 ; Liu et al. 2021 , antibacterial systems Kang et al. 2024 , and fracturing fluids Luo et al. 2025 . Their diverse anisotropic morphologies (nanorods, fibers, tubes and sheets) further allow precise control over the interfacial structure and rheological behavior Lisuzzo et al. 2022 . Building on this, Dorigon et al. Assunção Dorigon et al. 2025 demonstrated that bentonite nanoclay, primarily composed of platelet-shaped montmorillonite, forms highly stable Pickering emulsions with Bingham-type rheology owing to mechanically reinforced oil–water interfaces. Similarly, Pickering nanoemulsions stabilized by chitosan-coated montmorillonite nanosheets showed enhanced interfacial activity and colloidal stability owing to chitosan-assisted exfoliation Kang et al. 2024 . However, platelet-type nanoclays do not universally ensure emulsion stability. For example, Laponite ® -stabilized oil-in-water emulsions exhibited weak stability in the absence of surfactants Zheng et al. 2020 . In contrast, nano-montmorillonite effectively stabilized heavy crude oil–in–water emulsions, with rheology and stability strongly governed by salinity, pH, and temperature Luo et al. 2025 . In addition to platelets, tubular nanoclays such as halloysite nanotubes have also been shown to stabilize Pickering emulsions, where lateral interfacial adsorption and bundled shell formation effectively suppressed droplet coalescence Stehl et al. 2020 . In contrast to pristine clays, organoclays are organically surface-modified, making them hydrophobic and readily dispersible in oils and organic solvents. For example, layered Na-montmorillonite (Cloisite Na + )-stabilized oil-in-water Pickering emulsions exhibited stable, small and narrowly distributed droplets Yu et al. 2021 . Liu et al. Liu et al. 2021 further demonstrated synergistic stabilization using organoclay combined with silica nanoparticles of intermediate hydrophobicity. Individually, the silica nanoparticles failed to stabilize the emulsions because of insufficient interfacial adsorption Taleb et al. 2024 . In addition to stability, organoclays strongly influence emulsion rheology. Organo-hectorite (Bentone 38)–stabilized water-in-gasoil Pickering emulsions displayed non-Newtonian shear-thinning behavior with a finite yield stress, underscoring the role of clay-induced microstructural networks in controlling flow behavior Merad et al. 2021 . Thus, previous studies have indicated that non-spherical particles are effective Pickering emulsion stabilizers. Their higher detachment energies compared to spherical particles, along with their anisotropic interfacial orientation and enhanced surface coverage, particularly for discs and rods, significantly improve emulsion stability Lisuzzo et al. 2022 . Among non-spherical clays, Garamite-1958 ® nano-organoclay shows a strong potential for stabilizing Pickering emulsions. It possesses a unique plate–rod morphology,

Read the complete text