Berry’s phase under topology change
Pavel Kurasov, Vladislav Shubin, Axel Tibbling · 2026
Read Berry’s phase under topology change by Pavel Kurasov, Vladislav Shubin, Axel Tibbling (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-10798.txt.
Introduction
Pavel Kurasov, Vladislav Shubin, and Axel Tibbling show that Hamiltonians with real-valued eigenfunctions may hold a non-trivial shape Berry phase, settling a query on topology shift. Set vertex rules, unbroken value and Kirchhoff rules on first slopes, are fixed by the metric graph and allow no topology shift. But richer self-adjoint vertex rules allow sets that show unlike topologies on the same edges.
The authors weigh a cycle set of metric graphs that show a non-trivial shape phase of pi, though all eigenfunctions can be picked real-valued. Scaled eigenfunctions are flipped by minus one after one cycle when the set gets back to its first state. Their model looks like a figure-eight graph whose mid vertex joins four ends, with vertex rules that hinge on one cycle trait.
Catalog record
| CREATOR | Pavel Kurasov, Vladislav Shubin, Axel Tibbling |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31926 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.10798
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Berry’s phase under topology change Pavel Kurasov, Vladislav Shubin, Axel Tibbling Abstract . Laplacians on metric graphs are used to construct continuous families of Hamiltonians with different topological structure. One such family is used to demonstrate that Hamiltonians with real-valued eigenfunctions may possess non-trivial geometric Berry’s phase. Connections between non-trivial Berry’s phase and topology change are discussed. 2020 Mathematics Subject Classification Primary: 11M06, 30B50, 42B10, 46F12 Secondary: 42A75, 46F05, 52C23 1. Introduction Differential operators on metric graphs provide an excellent opportunity to study connections between topology and spectral theory using differential operators having eigenfunctions that often can be calculated explicitly despite rather complicated topological structure of the system. In these systems the edges determine only the geometric properties, while topological structure is given by the vertex conditions. Standard vertex conditions (continuity of the function and Kirchhoff condition on its first derivatives) used in many examples are uniquely determined by the metric graph and give no possibility to change the topology of the system. Using more sophisticated vertex conditions, still ensuring that the operator is self-adjoint, allows one to consider families of systems exhibiting different topologies while using the same set of edges, ( i.e. the same metric structure) (see Section 2 , where we describe these conditions in detail). Our attention was drawn to the subject by [ Shapere2012 ] , where relations between vertex conditions connecting end points in two intervals and possible topology of the corresponding graph are thoroughly discussed (following pioneering work [ 3 ] ). In particular, the authors were interested in Berry’s phase appearing in adiabatic evolution of quantum systems (see [ 6 , SchWi1 ] ). In particular the authors raised the question (see [ Shapere2012 , middle of page 4] ): whether a non-trivial geometric (Berry) phase can be observed, despite bases of real eigenfunctions can be used throughout? In the current note we answer this question positively by considering a periodic family of metric graphs (similar to one studied in [ Shapere2012 ] ) exhibiting a non-trivial geometric phase equal to \pi even though all eigenfunctions can be chosen real-valued: the normalised eigenfunctions of the system are multiplied by -1=e^{i\pi} after passing one period when the system returns back to the original state. Our model can be seen as a figure eight graph where the central vertex connects four end points. The chosen family of vertex conditions depends on just one parameter \theta and is periodic with period 2\pi . For certain special values of the parameter the vertex conditions do not properly connect all four end points and the graph turns into either two independent cycles or just one cycle. The suggested family of vertex conditions is also real, implying that the eigenfunctions can be chosen real-valued. This property puts a rather strong restriction on the system making the existence of a non-trivial geometric phase even more striking: once eigenfunctions are fixed for one value of the parameter, the normalised eigenfunctions for all other values are uniquely determined by continuity. Note that, without real-valued eigenfunctions, Berry’s phase was observed for an even simpler system of just two half-lines coupled together at one degree two vertex [ ExGr ] . The article is organised as follows. In Section 2 we revise the notion of metric graph and describe relations between vertex conditions and topology of the graph. Our explicit model is presented in Section 3 . Spatial symmetry of the model described in Section 4 allowing to treat even and odd eigenfunctions separately. The spectrum is determined in Section 5 ; it is independent of the parameter in the special case of equal edge lengths. The eigenfunctions are calculated explicitly depending continuously on the parameter. It appears that after one period the eigenfunctions are multiplied by -1 generating a geometric phase equal to \pi:e^{i\pi}=-1 . More details can be found in Master’s theses [ Tibbling2025 , Shubin ] . 2. Topology of metric graphs and vertex conditions In our construction we are going to follow the approach to spectral theory of metric graphs described in detail in [ Book ] , see also [ BeKu , Mugnolo ] . Let \Gamma be a metric graph formed by a finite number of edges E_{n}=[x_{2n-1},x_{2n}],\;n=1,2,\dots,N, each identified with a compact interval on an individual copy of the real line \mathbb{R} . Then the vertices in \Gamma can be seen as a partition of the set of end points \mathbf{V}=\{x_{j}\}_{j=1}^{2N} into equivalence classes V_{m},\;m=1,2,\dots,M ( V_{i}\cap V_{j}=\emptyset,i\neq j,\bigcup_{m=1}^{M}V_{m}=\mathbf{V} ), called vertices . The differential operator, say the Laplacian -\frac{d^{2}}{dx^{2}} , is well-defined acting on the functions determined on the edges. The functions on different edges are independent and therefore the differential operator is not symmetric. To make the operator self-adjoint one introduces vertex conditions connecting limiting values of the functions u(x_{j}):=\lim_{x\rightarrow x_{j}}u(x) and their normal derivatives \partial u(x_{j})=(-1)^{j+1}\lim_{x\rightarrow x_{j}}u^{\prime}(x_{j}), where the limits are taken from inside the intervals. The derivatives are taken in the direction pointing inside the edges, hence the extra sign in the formula. For each vertex V_{m} one introduces the vectors \vec{U}_{m}:=\begin{pmatrix}u(x_{i_{1}})\\ u(x_{i_{2}})\\ \vdots\\ u(x_{i_{d_{m}}})\end{pmatrix}_{x_{i_{j}}\in V_{m}},\quad\partial\vec{U}_{m}:=\begin{pmatrix}\partial u(x_{i_{1}})\\ \partial u(x_{i_{2}})\\ \vdots\\ \partial u(x_{i_{d_{m}}})\end{pmatrix}_{x_{i_{j}}\in V_{m}}. The dimension of the vectors coincides with the degree d_{m} of the vertex V_{m} – the number of end points joined at V_{m} . Then the most general vertex conditions at V_{m} can be written as (see (3.21) in [ Book ] ) (1) i(\mathbf{S}_{m}-\mathbf{I})\vec{U}_{m}=(\mathbf{S}_{m}+\mathbf{I})\partial\vec{U}_{m}, where \mathbf{S}_{m} is any unitary d\times d matrix. This parametrisation of all possible vertex conditions grew up from Kostrykin-Schrader parametrisation using pairs of matrices [ KoSch ] and first appeared in [ Ha1 , Ha2 , KuNo ] . If the matrix \mathbf{S}_{m} has block-diagonal form, then the vertex V_{m} can be divided into two (or more) smaller vertices so that the vertex conditions are introduced only joining limiting values belonging to the new vertices. Therefore to have vertex conditions that correctly reflect the topology of the graph the matrices \mathbf{S}_{m} should be chosen not only unitary , but also being not block-diagonal . To get metric graph models with changing topology one may simply consider families of unitary matrices \mathbf{S}_{m}=\mathbf{S}_{m}(\theta) depending on a parameter \theta and having block-diagonal structure for certain values of the parameter. This would correspond to splitting of the vertex for these values of \theta , while preserving original topological structure for all other values of the parameter. The dependence between vertex conditions and topology of the metric graph was first discussed in [ KuSt ] and is well-described in Section 3.3.3 of [ Book ] . Note that vertex conditions can be used not only to reflect different topologies but also to model physical properties of the system since the parameter \mathbf{S}_{m} can be seen as the vertex scattering matrix at unit energy [ AsKuUs , ExTa , ExTa2 , KuMa , KuEn , BaEx , 17 ] . 3. The model A differential operator on metric graphs can be seen as a triple consisting of a metric graph, a differential operator acting on the edges and vertex conditions. The role of vertex conditions is two-fold: they are needed to make the differential operator self-adjoint and they determine how different edges are attached to each other, i.e. the topology