Freestanding GdBa 2 Cu 3 O 7-δ Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties

Kazumasa Iida*, Kai Walter, Takafumi Hatano, Kose Morinaga, Manuela Erbe, Hongye Gao, Satoshi Hata, Jens Hänisch · 2026

Read Freestanding GdBa 2 Cu 3 O 7-δ Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties by Kazumasa Iida*, Kai Walter, Takafumi Hatano, Kose Morinaga, Manuela Erbe, Hongye Gao, Satoshi Hata, Jens Hänisch (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-10703.txt.

Introduction

Kazumasa Iida and co-authors make free-standing superconducting films of GdBaCuO using a water-soluble melt-away layer with thermal release tape. An shapeless alumina capping layer stops cracking during lift-off. The team step by step varies the buffer layer placed between the superconducting film and the melt-away layer, testing its effect on structural integrity and superconducting properties after lift-off.

A lanthanum aluminate and strontium titanate bilayer buffer proves essential, keeping ordered growth and a switch point near 92 kelvin after lift-off, close to as-grown films. A flipped bilayer and single-layer buffers instead suppress the switch point, showing that stacking sequence is key. The results show buffer-layer design as a key factor for high-quality free-standing cuprate films that keep their superconducting character.

Catalog record

CREATORKazumasa Iida*, Kai Walter, Takafumi Hatano, Kose Morinaga, Manuela Erbe, Hongye Gao, Satoshi Hata, Jens Hänisch
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25532
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.10703

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Freestanding GdBa 2 Cu 3 O 7-δ Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties Kazumasa Iida*, Kai Walter, Takafumi Hatano, Kose Morinaga, Manuela Erbe, Hongye Gao, Satoshi Hata, Jens Hänisch Abstract Freestanding GdBa 2 Cu 3 O 7-δ (GdBCO) superconducting thin films were fabricated using a water-soluble Sr 3 Al 2 O 6 (SAO) sacrificial layer in combination with thermal release tape. An amorphous Al 2 O 3 capping layer was introduced to suppress crack formation during the lift-off process. The influence of buffer-layer design inserted between the GdBCO and SAO layers was systematically investigated with respect to structural integrity and superconducting properties after lift-off. A LaAlO 3 /SrTiO 3 bilayer buffer was found to be essential for maintaining epitaxial growth and a superconducting transition temperature ( T c T_{\mathrm{c}} ) of approximately 92 K after lift-off, comparable to that of the as-grown films. In contrast, a reversed SrTiO 3 /LaAlO 3 bilayer and single-layer buffer structures led to a suppression of T c T_{\mathrm{c}} , highlighting the critical role of stacking sequence. These results demonstrate that optimization of the buffer-layer design is a key factor for realizing high-quality freestanding GdBCO films while maintaining their superconducting characteristics. \newfloat schemehtbplos \floatname schemeScheme \floatname chartChart \newfloat graphhtbploh Keywords free-standing membrane, cuprate superconductors, buffer-layer design, oxide heterostructures, superconducting properties 1. INTRODUCTION Freestanding thin films offer a powerful means to evaluate the intrinsic properties of materials by eliminating substrate-induced effects. Free from substrate-induced strain and lattice mismatch, these systems enable the extraction of intrinsic structural and electronic characteristics, providing critical insights into anisotropy and the fundamental aspects of their physical properties. Such an approach allows property evaluations that are difficult to achieve with conventional epitaxial films and plays an important role in both the exploration of new materials and the validation of theoretical predictions. From a device application standpoint, most modern semiconductor and electronic devices are based on silicon technology, creating strong demand for techniques that enable the stacking and integration of diverse functional thin films on Si substrates. However, the range of materials that can be directly grown on Si is limited, which has restricted broader device applications. Freestanding thin films have therefore attracted considerable attention as an effective strategy to overcome this limitation. Furthermore, functional freestanding films can be transferred not only onto Si but also onto arbitrary substrates [ 1 , 2 ] . Owing to this versatility, freestanding thin films are also regarded as highly promising for applications in wearable devices and flexible electronics [ 3 , 4 ] . Research on freestanding thin films has advanced since the introduction of water-soluble sacrificial layers such as Sr 3 Al 2 O 6 (SAO) [ 5 ] and BaO [ 6 , 7 ] , and their application has now been extended to a wide range of oxides. For cuprate superconductors, freestanding films of YBa 2 Cu 3 O 7-δ (YBCO) [ 8 , 9 ] , GdBa 2 Cu 3 O 7-δ (GdBCO) [ 10 ] , and Pr 1.85 Ce 0.15 CuO 4-δ [ 11 ] have been reported. More recently, Sr 4 Al 2 O 7 has been proposed as a new water-soluble sacrificial layer [ 12 ] , and this approach has also enabled the fabrication of freestanding films of nickelate superconductors [ 13 ] . However, YBCO superconductors are chemically unstable in water [ 14 ] , making the straightforward removal of sacrificial layers with deionized water difficult. Consequently, etching in alkaline solutions with pH \approx 12 has been employed [ 8 , 9 ] . In contrast, there is only one report of freestanding REBCO films obtained using deionized water, in that case GdBCO [ 10 ] . When REBCO (RE: rare earth elements) is grown directly on SAO, the superconducting transition temperature ( T_{\mathrm{c}} ) is reduced, and X-ray diffraction (XRD) measurements indicate that the resulting films lack epitaxial growth. Moreover, at the high growth temperatures ( > 730 ∘ C) required for REBCO deposition, interdiffusion between SAO and REBCO may occur, potentially leading to the critical issue that SAO no longer dissolves in water. Indeed, in LaMnO 3 /SAO systems, interdiffusion has been reported to inhibit the dissolution of SAO [ 15 ] . To mitigate this effect, a thin intermediate SrTiO 3 (STO) layer inserted between LaMnO 3 and SAO has been demonstrated to effectively suppress interdiffusion. Following this approach, the insertion of a LaAlO 3 (LAO)/STO bilayer between YBCO and SAO has been reported to enable the fabrication of freestanding films without compromising T_{\mathrm{c}} [ 8 ] . However, no magnetization measurements were carried out, leaving it uncertain whether bulk superconducting properties were preserved. In this study, we aimed to fabricate GdBCO freestanding films that retain bulk superconducting properties by introducing various intermediate layers. As a result, a single intermediate layer between the SAO and GdBCO layers was inadequate. Only the LaAlO 3 /SrTiO 3 bilayer configuration successfully maintained the superconducting properties, whereas the reversed SrTiO 3 /LaAlO 3 sequence failed to do so, clearly evidencing the critical role of buffer-layer sequence. After removal of the sacrificial layer with deionized water, magnetization measurements indicated that superconducting properties were well preserved after lift-off, with T_{\mathrm{c}} \approx 92 K. 2. EXPERIMENTAL SECTION All films were fabricated by pulsed laser deposition (PLD) using a KrF excimer laser with a wavelength of 248 nm. STO(001) and LAO(001) substrates with dimensions of 10 mm \times 10 mm and a thickness of 0.5 mm were employed. The substrates were cut into 5 mm \times 5 mm pieces, and STO substrates were surface-treated according to Ref. [ 16 ] . The atomic force microscope (AFM) measurements confirmed that the treated STO substrate has an atomically flat surface (Supplementary Information, Fig. S1). The substrate was then fixed to a holder with Ag paste and introduced into the deposition chamber. SAO was deposited under conditions of oxygen pressure 1.3 Pa, substrate temperature 700 ∘ C, laser repetition rate f =3 Hz, and energy density \epsilon =1.5 J/cm 2 . Subsequently, STO and LAO were deposited as intermediate layers under the same conditions as SAO. GdBCO was then deposited under conditions of oxygen pressure 40 Pa, substrate temperature 775 ∘ C, f =10 Hz, and \epsilon =1.5 J/cm 2 . The nominal thicknesses of the SAO, STO, LAO, and GdBCO layers were set to 45 nm, 35 nm, 20 nm, and 175 nm, respectively. After deposition, the samples were removed from the chamber and subjected to post-annealing in a tube furnace at 400 ∘ C for 3 h in 1 atm of O 2 . Table 1 summarizes the films fabricated in this study. Table 1: Sample names and buffer-layer stacking sequences, including reference GdBCO films grown on single-crystal substrates. Sample name Film stacking structure Film A GdBCO/LAO/STO/SAO/STO-sub. Film B GdBCO/STO/LAO/SAO/STO-sub. Film C GdBCO/LAO/SAO/STO-sub. Film D GdBCO/STO/SAO/STO-sub. STD #1 GdBCO/STO-sub. STD #2 GdBCO/LAO-sub. Lift-off experiments were carried out for Film A as follows. To suppress crack formation during lift-off, an amorphous Al 2 O 3 (a-Al 2 O 3 ) capping layer was first deposited on the film surface by PLD at room temperature [ 17 ] . A thermal release tape (Somar Co., Ltd., Somatac PS-2071TE; polyethylene

Read the complete text