Construction, commissioning, and beam test of a pilot 3D-projection opaque water-based liquid scintillator detector Journal: Nuclear Instruments and Methods in Physics Research Section A
H. Che, M.V. Diwan, S. Gokhale, P. Kumar, C. Reyes, R. Rosero, J.J. Wang, G. Yang, M. Yeh · 2026
Read Construction, commissioning, and beam test of a pilot 3D-projection opaque water-based liquid scintillator detector Journal: Nuclear Instruments and Methods in Physics Research Section A by H. Che, M.V. Diwan, S. Gokhale, P. Kumar, C. Reyes, R. Rosero, J.J. Wang, G. Yang, M. Yeh (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-10683.txt.
Introduction
H. Che and co-authors report the design, build, and beam test of a pilot 3D projection detector based on opaque water-based liquid scintillator. The detector is an 8 by 8 by 16 cm acrylic vessel fitted with three right-angle planes of colour-shifting fibres read out by multi-pixel photon counters. Its CITIROC front-end circuits were built for the T2K experiment's WAGASCI and SuperFGD detectors. Filled with the opaque liquid, it was tested with cosmic rays and proton beams at four energies at Brookhaven's NASA Space Radiation Laboratory.
3D event displays of cosmic muons and proton candidates go with a study of sideways light trapping through radial charge spreads. Measured data show tighter trapping than a Geant4 run with a 2 cm spread length. This places the working spread length well below that value. It confirms optical trapping in the medium.
Catalog record
| CREATOR | H. Che, M.V. Diwan, S. Gokhale, P. Kumar, C. Reyes, R. Rosero, J.J. Wang, G. Yang, M. Yeh |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 75008 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.10683
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Construction, commissioning, and beam test of a pilot 3D-projection opaque water-based liquid scintillator detector Journal: Nuclear Instruments and Methods in Physics Research Section A H. Che, M.V. Diwan, S. Gokhale, P. Kumar, C. Reyes, R. Rosero, J.J. Wang, G. Yang, M. Yeh Abstract We report on the design, construction, and beam test of a pilot three-dimensional projection detector based on opaque water-based liquid scintillator (oWbLS). The detector consists of an 8 × 8 × 16 8\times 8\times 16 cm 3 acrylic vessel instrumented with three orthogonal planes of Kuraray Y11 multi-clad wavelength-shifting fibers read out by Hamamatsu multi-pixel photon counters. The readout electronics are based on the CITIROC front-end boards developed for the WAGASCI and SuperFGD detectors of the T2K experiment. The detector was filled with oWbLS and tested with cosmic rays and proton beams of 50, 100, 250, and 500 MeV kinetic energy at the NASA Space Radiation Laboratory at Brookhaven National Laboratory. We present three-dimensional event displays of cosmic muon and proton beam candidates, and a study of transverse light confinement via radial charge distribution measurements. The measured data show tighter light confinement than a Geant4 simulation with a 2 cm scattering length, placing the effective scattering length well below 2 cm and confirming effective optical confinement of scintillation light in the oWbLS medium. A first measurement of the hit-level timing resolution using 500 MeV proton beam data yields a single-channel timing resolution of σ t ≈ 0.17 \sigma_{t}\approx 0.17 – 0.28 0.28 ns with good photostatistics. These results demonstrate the viability of the 3D-projection oWbLS technology as a scalable, fully-active detector concept for next-generation particle physics experiments. 1 Introduction Three-dimensional fine-grained scintillator detectors have emerged as a powerful technology for neutrino interaction measurements and calorimetry. The Super Fine-Grained Detector (SuperFGD) of the upgraded T2K ND280 near detector [ 1 ] demonstrated that an array of 1\times 1\times 1 cm 3 optically isolated scintillator cubes, each traversed by three orthogonal wavelength-shifting (WLS) fibers, can achieve sub-centimeter position resolution, sub-nanosecond timing, and efficient neutron detection [ 2 , 3 , 4 ] . These capabilities are essential for reducing systematic uncertainties in neutrino oscillation experiments such as T2K [ 5 ] , DUNE [ 6 ] , and Hyper-Kamiokande [ 7 ] , and have been recognized as a priority in the DOE Basic Research Needs study on HEP detector R&D [ 8 ] . Despite these successes, the mechanical segmentation approach has practical limitations. Manufacturing, quality-controlling, and assembling millions of individual cubes is a labor-intensive process spanning years. Once cast, the detector properties such as spatial granularity, radiation length, and scintillation yield are permanently fixed. Opaque liquid scintillator offers an alternative path to fine-grained detection [ 9 , 10 , 11 , 24 ] . In this approach, a highly scattering liquid medium confines scintillation photons to a small volume around the point of energy deposition. A lattice of WLS fibers sampling the volume at regular intervals captures this confined light, providing spatial information without mechanical segmentation. The detector granularity is determined by the fiber pitch and the optical scattering length of the liquid, both of which are tunable parameters. Water-based liquid scintillator (WbLS) [ 12 , 13 , 14 , 29 ] is a particularly attractive candidate for opaque detector media, as its scintillation properties, opacity, and metal-loading capability can be adjusted through surfactant chemistry. We describe the design, construction, and beam test of a pilot detector that combines the 3D-projection readout concept proven in SuperFGD with an opaque WbLS medium. The detector was constructed at Brookhaven National Laboratory (BNL) and tested with cosmic rays and proton beams at the NASA Space Radiation Laboratory (NSRL), also located at BNL. This work serves as a proof-of-concept for a scalable 3D-projection opaque liquid scintillator detector technology with broad applications in neutrino physics, collider experiments, and rare-process searches [ 15 , 2 ] . 2 Detector concept The pilot detector implements a three-dimensional projection readout in an opaque liquid scintillator volume. The operating principle is illustrated in figure 1 . Three orthogonal sets of WLS fibers, designated as X-fibers, Y-fibers, and Z-fibers, penetrate the active volume at a regular pitch of 1 cm. When a charged particle traverses the liquid and deposits energy via ionization, scintillation photons are produced isotropically. In a transparent medium, these photons would propagate freely throughout the detector volume. In an opaque medium with a scattering length of order 1 mm, the photons undergo a stochastic random walk, forming a localized “light ball” around the segment of energy deposition. The WLS fibers nearest to the interaction point absorb the blue scintillation light (peak wavelength \sim 430 nm) and re-emit green photons (peak wavelength \sim 476 nm) that are guided by total internal reflection to multi-pixel photon counters (MPPCs) at the fiber ends. The three fiber views provide three independent two-dimensional projections of the event topology: the X-fibers yield the YZ projection, the Y-fibers yield the XZ projection, and the Z-fibers yield the XY projection. A three-dimensional image is reconstructed by matching hits across views that share a common coordinate, analogous to the reconstruction technique used in the SuperFGD [ 1 ] . The effective voxel size is determined by the fiber pitch, nominally 1\times 1\times 1 cm 3 in this pilot detector. A detailed benchmarking study of two-view versus three-view reconstruction for this class of detector has been reported in ref. [ 15 ] . The short scattering length of the opaque medium serves a dual purpose: it confines scintillation light to the vicinity of the energy deposition, providing intrinsic position sensitivity, and it suppresses optical crosstalk between distant fibers. This self-segmentation eliminates the need for physical boundaries between voxels, replacing the millions of individual scintillator cubes in a SuperFGD-type detector with a continuous, pumpable liquid medium. Figure 1 : Schematic of the 3D-projection opaque liquid scintillator detector concept. Left: cutaway view showing three orthogonal sets of WLS fibers (X-fibers in red, Y-fibers in green, Z-fibers in blue) immersed in the opaque liquid scintillator volume. SiPMs at the fiber ends are indicated in yellow. Right: simulated electron event showing 3D-matched voxels (red/orange cubes) with color proportional to energy deposition, and hit SiPMs on the detector faces (yellow). The scattering length of the liquid is approximately 1 mm. 3 Detector construction The pilot detector was designed and constructed at BNL. The construction proceeded in five stages: fabrication of the acrylic frame, installation of WLS fibers, sealing of the fiber penetration points with Weld-On 40, attachment of photosensor readout boards, and filling with opaque liquid scintillator. Each stage is described in detail below. 3.1 Acrylic frame assembly The mechanical structure of the detector consists of a rectangular acrylic frame defining an active volume of 8\times 8\times 16 cm 3 . The frame was machined from optical-grade cast acrylic (polymethyl methacrylate, PMMA) sheets. The acrylic boards were precision-cut and drilled with a regular pattern of 1.0 mm-diameter holes at a pitch of 10 mm to accommodate the WLS fibers in three orthogonal directions. The hole pattern provides 8 fiber positions along the X and Y dimensions and 16 positions along the Z dimension. The acrylic boards were bonded using Weld-On solvent cement, a capillary-grade acrylic adhesive that works through