A Reconfigurable Multiplier Architecture for Error-Resilient Applications in RISC-V Core

Pragun Jaswal * , L. Hemanth Krishna † , B. Srinivasu ‡ · 2026

Read A Reconfigurable Multiplier Architecture for Error-Resilient Applications in RISC-V Core by Pragun Jaswal * , L. Hemanth Krishna † , B. Srinivasu ‡ (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-08785.txt.

Introduction

Pragun Jaswal, L. Hemanth Krishna, and B. Srinivasu build a reconfigurable multiplier inside a RISC-V processor for neural network inference on tight energy budgets. Their design switches at runtime between exact and approximate multiplication at several accuracy levels through a dedicated instruction, giving fine grained control of the energy versus accuracy trade within a normal pipeline.

Power falls by roughly half in exact mode and by about two thirds in approximate mode, while standard speed scores hold steady. On error tolerant workloads like convolution and matrix multiplication, total energy drops by up to about two thirds. Edge AI gains arithmetic that can spend precision only where the task actually needs it.

Catalog record

CREATORPragun Jaswal * , L. Hemanth Krishna † , B. Srinivasu ‡
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.08785

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Reconfigurable Multiplier Architecture for Error-Resilient Applications in RISC-V Core Pragun Jaswal * , L. Hemanth Krishna † , B. Srinivasu ‡ Abstract Neural Networks (NNs) have been widely adopted due to their outstanding efficacy and adaptability across computer vision and deep learning applications. The optimization of NNs is necessary to enable their deployment on energy constrained embedded devices, where the limited available energy poses a significant challenge for efficient inference. This paper presents a runtime reconfigurable multiplier architecture integrated into the RISC-V core, targeting energy efficient neural network inference and edge AI applications. The proposed multiplier supports adaptability for exact and approximate computation with multiple configurable accuracy levels via a dedicated mulscr , enabling fine-grained energy accuracy control within a standard processor pipeline. The proposed design achieves 44%-52% and 62%-68% power reduction in exact and approximate modes respectively, while maintaining the computational performance of 1.89 DMIPS/MHz. Evaluations on error-tolerant workloads including 2d convolution and matrix multiplication demonstrate up to 63% reduction in energy consumption, with the proposed design achieving 1.21 pJ/instruction for matrix multiplication, confirming its effectiveness for energy-constrained edge AI deployments. I Introduction Neural Networks (NNs) have achieved state-of-the-art performance in various application domains, including computer vision, natural language processing, and edge intelligence [ 1 ] . These networks mainly rely on highly parallel linear operations such as convolution and matrix multiplication, which dominate the computational workload. In recent years, the deployment of NNs in embedded systems has gained significant attention, as it enables intelligent processing directly at the edge, reducing latency, bandwidth usage, and dependence on cloud-based computation [ 2 ] . However, high accuracy of NNs comes at the cost of high computational complexity, which makes their deployment challenging on power and resource limited embedded devices [ 3 ] . A notable observation is that NNs offers error tolerance capabilities. Minor computation error in the arithmetic units often do not noticeably degrade output quality [ 4 ] . This characteristic has encouraged the adoption of approximate computing, a design methodology that deliberately trades numerical precision for improvements in energy efficiency, latency, and silicon area. Approximate computing reduces computational cost by allowing controlled inaccuracies in arithmetic operations [ 5 , 6 , 7 , 8 ] . However, the error sensitivity of neural networks varies across different layers and workloads [ 6 ] , making a fixed-accuracy approximate unit inefficient. Therefore, designing a multiplier with runtime reconfiguration is important to ensure flexibility and adaptability. The RISC-V Instruction Set Architecture (ISA) [ 9 ] is now becoming a preferred choice among embedded processor developers, due to its adaptability and flexibility for various applications. The integration of RISC-V with approximation computing [ 6 , 10 ] , presents further opportunity to enhance the energy efficiency and performance of embedded processors. This work presents a novel hardware architecture for reconfigurable multiplier and also examines the effect of adaptive hardware approximation on the runtime energy efficiency of a RISC-V embedded processor for various applications. The primary contributions of this study are as follows: 1. Utilizing a 32-bit optimized 3-stage pipelined RV32I(E)M embedded processor using standard and special RISC-V Control Status Registers (CSRs). 2. Design and implementation of an runtime reconfigurable unsigned multiplier with 255 approximation levels. 3. Analysis and evaluation of runtime approximation at core level, in an embedded processor for error resilient applications. 4. Proposed design in approximate mode achieves 1.21 pJ/instruction for matrix multiplication which is 67% improvement from exact implementation. The rest of the paper is organized as follows: Section II provides the background and related works of RISC-V based approximate computing. Section III describes the proposed hardware architecture, and Section IV presents its hardware implementation results and evaluation of the proposed architecture, followed by the conclusion in Section V . II Related Works Approximate computing has been explored across multiple levels of the hardware stack, from circuit level arithmetic units to processor micro-architectures. This section reviews the recent work presented in the literature. II-A Circuit Level Approximate Multipliers At the circuit level, a substantial work has addressed the design of approximate adders and multipliers. Early works targeting image processing applications were reported in [ 4 ] , with carry-disregard multipliers subsequently introduced in [ 5 ] to improve error characteristics alongside hardware complexity. Compressor based architectures have also been extensively studied, including approximate 4:2 compressor based multipliers [ 11 ] , error recovery integrated design [ 7 ] , and hybrid partial-product recursive multipliers [ 8 ] . Alternative strategies such as logarithmic and dynamic range multipliers targeting machine learning workloads have further been explored [ 12 ] . However, the majority of these designs employ static approximation strategies, with fixed accuracy at design time and no mechanism for runtime control, limiting their applicability to dynamic and general-purpose computing scenarios. II-B RISC-V Based Reconfigurable Approximate Computing The integration of approximate arithmetic into open ISAs such as RISC-V has recently attracted significant attention. ApproxRISC [ 13 ] introduced one of the early designs enabling software-based approximate execution within a RISC-V framework, while AxPIKE [ 14 ] enabled instruction-level approximation evaluation for quality-energy trade-off analysis. Verma et al. [ 15 ] integrated a shift-and-add based approximate multiplier into a RI5CY core [ 16 ] for error-tolerant applications. Delavari et al. [ 10 ] proposed the phoeniX platform, a modular RISC-V core supporting configurable approximate arithmetic units via CSR-based control, with dynamic switching between exact and approximate execution further evaluated in [ 17 ] . More recently, MARLIN [ 6 ] proposed a runtime-reconfigurable signed multiplier supporting 255 approximation levels integrated into a RI5CY-based core with CSR-controlled dynamic precision. Moreover, most existing designs offer limited configurability and are tailored to specific application domains. This work addresses these limitations by presenting a micro-architectural design of a runtime-reconfigurable approximate multiplier that supports a wide and continuous range of accuracy levels, including exact computation, and is designed for seamless integration into a standard RISC-V processor pipeline. III Proposed Reconfigurable Multiplier The proposed design is implemented on the phoeniX processor [ 10 ] , an open-source RISC-V core supporting the RV32I(E)M instruction set. phoeniX features a 3-stage scalar pipeline comprising an Instruction Fetch and Decode (IF/ID) stage, an Execution (EXE) stage, and a Memory Access with Write-back (MEM/WB) stage. The execution stage hosts three computational units, an Arithmetic Logic Unit, a Multiplier Unit, and a Divider Unit corresponding to the RV32IEM instruction set requirements. A key architectural feature of phoeniX is its support for runtime approximation control through three dedicated Control and Status Registers (CSRs) mapped at addresses 0x800 ( alucsr ), 0x801 ( mulcsr ), and 0x802 ( divcsr ) in the standard RISC-V CSR addressing space [ 9 ] . These CSRs allow each execution unit to dynamically switch between exact and approximate operation, as well as control the level of approximation at runtime without any pipeline stall or structural modification. Fig. 1 illustrates the high level block diagram of the execution stage of the phoeniX core. In the original phoeniX architecture, the multiplier unit consists of two separate circuits, one exact and one approximate. In the proposed modification, both are replaced by a single proposed novel runtime-reconfigurable 32-bit multiplier that dynamically operates in either exact or approximate mode based on the

Read the complete text