Heat Transfer in Phase Change Materials with Multiple Fin Insertion

Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci · 2026

Read Heat Transfer in Phase Change Materials with Multiple Fin Insertion by Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-08120.txt.

Introduction

Paolo Proia, Mauro Sbragaglia, and Giacomo Falcucci simulate how to melt phase change materials faster. These materials store and release heat as they melt and freeze, and a solid block is often heated from one boundary with metal fins reaching inside. The team runs three-dimensional simulations with buoyancy in the melt.

Comparing finless, single-fin, and multi-fin cells at equal heating power, they confirm that fins speed melting. A single fin turns out to be suboptimal, because several fins exploit the spaces between them and melt the material more evenly. Spacing matters too: fins placed too close overlap in effect and waste their advantage.

Catalog record

CREATORPaolo Proia, Mauro Sbragaglia, Giacomo Falcucci
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.08120

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Heat Transfer in Phase Change Materials with Multiple Fin Insertion Paolo Proia, Mauro Sbragaglia, Giacomo Falcucci Abstract We leverage 3D numerical simulations to study phase change materials (PCMs) cells under the effect of buoyancy forces. The solid PCM is heated from a source boundary, triggering melting. The source features multiple solid fins that protrude into the PCM cell; the impact of the fins and their number is investigated by designing and testing equivalent (in terms of heating power) finless and single fin simulations. For each configuration, the performance is quantified via the total molten substance in time. The designs were also tested for different values of the non-dimensional numbers encoding relevant properties. We confirm that fins increase the melting performance and find that single fin configurations are sub-optimal since a layout with multiple fins takes advantage of interstitial spaces, melting the substance more efficiently. The results also indicate that fins should be properly spaced, as closeness can result in overlapping, thus interfering, molten areas. Heat-Transfer & Phase Change Materials with multi-fin configurations 1 Introduction Due to their large latent heat, Phase Change Materials (PCMs) prove exceptionally useful in storing heat in many fields, including cold energy storage [ 6 , 1 ] , building insulation [ 38 ] , thermal management in electronics [ 42 ] and hydride thermal management for hydrogen adsorption/release [ 11 , 23 ] , to cite but few examples. The dynamics of phase change in a PCM system involves a complex coupling between buoyancy forces, melting and thermal convection [ 9 , 29 , 28 , 43 , 39 ] : a solid substance melts due to the heating from a source boundary; the liquid, then, develops buoyancy-driven thermal convection, eventually leading to the complete liquefaction of the solid phase (see fig. 1 ). Since PCM heat transfer properties are usually suboptimal, many research efforts have been devoted to relieve this flaw. Among the many design solutions in the literature [ 36 , 26 ] , the insertion of fins delivers a simple, both conceptually and manufacturing-wise, yet effective way of transferring heat to a PCM. Paramount to fin effectiveness is their strategic placement, to promote diffusion in the early stages of melting, as well as convection in the late dynamics [ 41 , 42 , 20 , 3 , 30 ] . Recent examples in the literature include [ 42 ] , in which the authors study and optimize branching fin structures to boost the performance of a battery pack thermal management system based on PCMs; in [ 20 ] , a parametric study was conducted focusing on fin orientation and porosity, while in [ 3 ] , the effect of fin shape was investigated. In [ 8 ] , honeycomb fins were investigated: the trade-off between the increase in system mass and volume associated with the fins is discussed, as well as the resulting improvement in hydrogen absorption/desorption rates; in [ 33 ] , a metal hydride–PCM reactor is optimized by introducing a “fin factor” index to balance heat transfer surface enhancement against geometric penalties, with the aim of improving thermally limited charging and discharging times. Further applications and optimizations can be found in [ 46 , 45 , 2 ] . Even without buoyancy, melting is a complex simulation task, due to the presence of the moving boundary between the solid and liquid phases; including gravitational effects adds the non-linearity of convection to the evolution of the interphase boundary. Thus, an accurate characterization of the temporal evolution of the melting front requires detailed local information. While such insight can be (partially) obtained through carefully designed experiments [ 18 , 39 ] , numerical simulations grant deeper insight, allowing higher spatial and temporal resolution for the evaluation of PCM performance [ 43 , 40 , 15 , 34 ] . On the top of this quite intricate scenario, the addition of fins modifies the boundary shape adding another layer of complexity. In this letter, we conduct numerical simulations to provide a quantitative insight on the impact of different geometrical configurations of fins in the enclosure, extending to three dimensions previous analyses conducted with the same numerical approach [ 30 ] . In particular, we address key issues on the importance of the number of adopted fins, as well as their spatial layout. Our systematic analysis hinges on the study of equivalent configurations, i.e. layouts with the same heating areas but with different numbers of heating elements and different geometrical designs. The parametric tests are based on non-dimensional numbers characterizing the flow, providing a useful, technical operational tool. Thus, in order to dissect the effective role of fluid properties and heating element layouts, we also test the same configurations in different convection regimes (i.e. higher or lower relative convection strength), regulated by different values of the Rayleigh Number \operatorname{Ra} . Later, we provide an analysis in the conductive regime for different values of the Stefan Number (i.e. the ratio of sensible heat to latent heat) \operatorname{St} . (a) t^{\star}=0.00 t^{\star}=0.05 t^{\star}=0.15 t^{\star}=0.25 T (c) (d) (b) i) line ii) rect iii) stagger iv) star v) square vi) midplate vii) lowplate viii) finless Figure 1 : Panel (a): typical snapshots of temperature field in the melting dynamics of a PCM cell consisting of a cubic enclosure with side L under the effect of gravity \vec{g}=-g\hat{z} . The solid substance is rendered as transparent. A side boundary of the enclosure consists of a hot wall at temperature T_{\text{\tiny H}}=1 featuring hot fins/plates protruding into the enclosure. Different dimensionless times t^{\star} are reported (see text for details). Panel (b): different geometrical configurations used in the simulation. Panels (c)-(d): close up on the geometrical structure of the fins/plates used. 2 Hydrodynamic description of thermal convection with melting The PCM cell is modeled as a cubic enclosure of side length L initially filled with a solid material at temperature T_{\text{\tiny C}} . The solid material is heated from a hot source on the left wall at temperature T_{\text{\tiny H}} ; the a side wall also presents different heating elements (multiple fins or a plate) protruding into the bulk of the enclosure (see fig. 1 ). Heat transfer is triggered by the hot source, generating the melting of the solid material and triggering the convective dynamics of the molten phase [ 18 , 15 , 31 ] . This complex scenario is studied at the hydrodynamical level via the continuum fields of density \rho=\rho(\vec{x},t) , velocity \vec{u}=\vec{u}(\vec{x},t) and temperature T=T(\vec{x},t) ; melting is locally monitored via the liquid fraction \phi=\phi(\vec{x},t) that assumes values between 0 (solid) and 1 (liquid). These fields obey the Navier-Stokes equations with buoyancy forces plus an advection-diffusion equation for the temperature featuring a melting term [ 29 , 18 , 17 , 5 ] : \displaystyle\partial_{t}\rho+\vec{\nabla}\cdot\left(\rho\vec{u}\right)=0 (1) \displaystyle(\partial_{t}+\vec{u}\cdot\vec{\nabla})\vec{u}=\nu\nabla^{2}\vec{u}-\frac{\vec{\nabla}p}{\rho}-\alpha(T-T_{0})\vec{g} (2) \displaystyle\partial_{t}T+\vec{\nabla}\cdot(T\vec{u})=\kappa\nabla^{2}T-\frac{L_{f}}{C_{p}}\partial_{t}\phi (3) where p=p(\vec{x},t) represents the fluid pressure, \nu the fluid kinematic viscosity, \kappa the thermal diffusivity, L_{f} the latent heat of fusion and C_{p} the specific heat. The buoyancy term in the r.h.s. of Eq. ( 2 ) is written in the Boussinesq approximation [ 5 , 17 , 18 ] , being proportional to the thermal expansion coefficient \alpha , the temperature difference w.r.t. a

Read the complete text