Tearing of charged current layers
Maxim Lyutikov Department of Physics and Astronomy, Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907-2036 · 2026
Read Tearing of charged current layers by Maxim Lyutikov Department of Physics and Astronomy, Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907-2036 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-06085.txt.
Introduction
Maxim Lyutikov simulates what happens inside electrically charged current layers in astrophysical plasmas. Such layers occur in pulsar winds, where the plasma holds equal numbers of electrons and positrons. While the plasma as a whole is charge symmetric, the layers themselves can carry charge, and that changes their stability.
Using particle in cell simulations, Lyutikov follows tearing and plasmoid formation in two layer types. Charged layers prove electrostatically unstable, and Bernstein waves arise fast inside them. Those waves shuffle charge early on but do not greatly change overall plasmoid growth, and the plasmoids end up mildly charged. In rotating layers, even layers that start uncharged develop large charge swings, and in some settings the tearing rate grows strongly.
Catalog record
| CREATOR | Maxim Lyutikov Department of Physics and Astronomy, Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907-2036 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.06085
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tearing of charged current layers Maxim Lyutikov Department of Physics and Astronomy, Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907-2036 Abstract Astrophysical current layers, e.g., in pulsar winds, can be electrically charged, while the plasma is charge-symmetric, e ± e^{\pm} . Using PIC simulations, we investigate dynamics and plasmoid formation (tearing instability) in charged Harris-type and rotational current layers. Electrically charged current layers, initially in global force-balance, are electrostatically unstable: the resulting dynamics is an intricate interplay between electrostatic Bernstein waves (BWs) and the current tearing mode. Besides overall density and magnetic field, plasma temperature is an important factor. In the charged Harris sheet set-up, the quickly generated BW are trapped within the layers (internally reflected at the upper hybrid resonance). BWs quickly redistribute the charge modifying the initial stage of tearing, but without strongly affecting overall plasmoid growth; resulting plasmoids are mildly charged. In rotational current layers: (i) even initially overall uncharged configurations develop large fluctuations of charge density; (ii) overall dynamics depends on the initial overall temperature; (iii) for certain combination of parameters tearing rate is greatly increased in the charged case. I Introduction Tearing of current layers is one the most basic plasma processes ( Furth et al. 1963 ; Galeev et al. 1978 ; Drake and Lee 1977 ) . In relativistic plasmas it was considered in Zelenyi and Krasnoselskikh 1979 ; Zenitani and Hoshino 2001 ; Zenitani and Hoshino 2007 ; Demidov and Lyubarsky 2025 ; Granier et al. 2025 ; Schoeffler et al. 2025 . (Relativistic may mean plasma temperature and/or highly magnetized plasma, with Alfvén velocity close to the speed of light.) Resistive force-free tearing mode was first considered by Lyutikov 2003 and simulated by Komissarov et al. 2007 . The results, when expressed in term of Alfvén and resistive times, surprising matched the non-relativistic expression. It was observed in Komissarov et al. 2007 that force-free equations can be put into an MHD-like form. In the field of plasma-astrophysics, the tearing mode is bound to be important in a number of set-ups, especially the pulsar current sheets Coroniti 1990 ; Uzdensky and Spitkovsky 2014 . Tearing mode, often called the plasmoid formation, is the dominant model of collisionless plasma reconnection Loureiro et al. 2007 ; Huang and Bhattacharjee 2010 . Relativistic tearing mode, especially in astrophysical applications, has another hitherto unexplored property: the current layer may be electrically charged. The prime example is Michel 1973 solution for pulsar winds. In this paper we explore the plasma physics properties of relativistic charged current layers. A comment on relativistic transformation is due. Locally, a current in one system of reference, by Lorentz transformation, corresponds to a charge density in some other frame - we are not interested in those trivial cases. We consider set-ups, mildly nonlocal, so that even if by Lorentz transformation a local charge density can be made zero, there is a spatially distributed currents/charges that cannot be Lorentz reduced by a local transformation, see more detailed discussion in § II.1 . First, in Sections II and III we describe the results of numerical simulations, and later in § IV we give explanations of the results. II Charged current layers in two-fluid set-up Historically, two set-up were used to study tearing mode: rotational force-free current sheet, and pressure supported Harris-type configuration ( Harris 1962 ) . (In pulsars, the equatorial current sheet is of the Harris type). Here we adapt both set-up to include non-zero charge density (electromagnetic shear). We first start with charged Harris configuration, and in § III consider charged rotational current sheet. Two steps are required to set-up a charged current sheet: (i) global equilibrium configuration in force balance (this involves electromagnetic fields, total charges and current, and for Harris sheet a pressure prescription); (ii) local prescription for velocity, density and pressure of each species to match the global constraint. ( Mizuno et al. 2026 , See also related discussion) In case of pair plasma, the point (ii) above has a simplification: both charges contribute equally - both to the current, and to the charge density. We first discuss the corresponding set-up for a single layer (Sections III and II.2 ). In simulations, we use double current layer. The requirement to use double layers are different, and somewhat subtle in each case, see § B . For notations, we use the following abbreviations: Charged Harris Current sheet (CHCS), Charged Rotational Current Sheet (CRCS). II.1 Charged current layer in pulsar winds (Michel’s equatorial current sheet). We use an abbreviated notations with elementary charge, electron mass and speed of light set to unity. In these notation, magnetic field B_{0}\equiv\omega_{B}=eB_{0}/(m_{e}c) . We use natural cgs units (a factor 1/(4\pi) is incorporated into definitions of charge). The corresponding relation look SI-like, with \epsilon_{0} and \mu_{0} set to unity. Michel 1973 solution for split-monopole magnetospherecan be written as (in r-\theta-\phi coordinates) \displaystyle{\bf B}=\left\{\frac{1}{\tilde{r}^{2}},0,\frac{\sin(\theta)}{\tilde{r}}\right\}B_{0}\times{\rm sign}(\pi/2-\theta)\mbox{} \displaystyle{\bf E}=\left\{0,\frac{\sin(\theta)}{\tilde{r}},0\right\}B_{0}\times{\rm sign}(\pi/2-\theta)\mbox{} \displaystyle\beta_{EM}=\left\{\frac{\tilde{r}^{2}\sin^{2}(\theta)}{\tilde{r}^{2}\sin^{2}(\theta)+1},0,-\frac{\tilde{r}\sin(\theta)}{\tilde{r}^{2}\sin^{2}(\theta)+1}\right\}\mbox{} \displaystyle\rho_{e}=2\frac{B_{0}\Omega|\cos(\theta)|}{\tilde{r}^{2}}\mbox{} \displaystyle{\bf j}=2\left\{\frac{B_{0}\Omega|\cos(\theta)|}{c\tilde{r}^{2}},0,0\right\}\mbox{} \displaystyle\tilde{r}=\frac{r\Omega}{c} (1) (in regular cgs units, \rho_{e} and j need to be divided by 4\pi . Figure 1: Michel’s solution for pulsar wind. Zoomed-in panel shows charged Harris-like current sheet (total magnetic field is zero at the equator) . The electric potential for Michel solution can be written as (assuming \Phi=0 on the axis), \Phi=\frac{B_{0}c(1-|\cos(\theta)|)}{\Omega} (2) Thus, \Phi has an extremum in the equatorial plane. In the two-fluid approach, for the Michels’ force-free solution one sign of charges is at the maximum of the electric potential, while another is at the minimum. As we will demonstrate below, this leads to fast electrostatic instability on Bernstein waves. The flow has equatorial charge density and surface current \displaystyle\sigma_{E}=2\frac{B_{0}}{\tilde{r}}\mbox{} \displaystyle g=2\frac{\sqrt{1+\tilde{r}^{2}}}{\tilde{r}^{2}}B_{0} (3) The electromagnetic structure is space-like, g^{2}>\sigma_{E}^{2} . By boosting with \beta_{EM} , locally electric field can be eliminated. But this cannot be done globally, or within a finite volume. For example, consider a local box near the equator \theta\approx\pi/2 . Let the region of interest occupy |\theta-\pi/2|\leq(\delta\theta) , (\delta\theta)\ll 1 . Making a boost corresponding to \theta_{0}=\pi/2\pm(\delta\theta) , the resulting electric field is E_{\theta}\propto(\sin\theta-\cos(\delta\theta))\times{\rm sign}(\pi/2-\theta) (4) It is zero at \theta=\pi/2\pm\theta and zero at \theta=\pi/2 . II.2 Resolved charged Harris current sheet To approximate the behavior ( 4 ) (zero electric field at the boundaries and in the middle), in a local simulation box we then set \displaystyle{\bf B}=\left\{\tanh\tilde{z},0,0\right\}B_{0}\mbox{} \displaystyle{\bf E}=\left\{0,0,\tanh\tilde{z}{\rm sech}^{2}\tilde{z}\right\}\beta_{0}B_{0} (5) This electric field models the local zero values at \theta=\pi/2\pm(\delta\theta) ( z\to\pm\infty ), and the requirement of zero electric field at \theta=\pi/2 ( z=0 ). Assuming globally constant temperature \Theta\equiv k_{B}T/(m_{e}c^{2}) , the corresponding relations for the charged Harris current sheet are \displaystyle n=n_{0}(1\pm f_{p})\mbox{} \displaystyle f_{p}=\frac{\sigma}{4\Theta}\left(1+\beta_{0}^{2}\tanh^{2}\tilde{z}{\rm sech}^{2}\tilde{z}\right){\rm sech}^{2}\tilde{z}\mbox{} \displaystyle p=2n\Theta\mbox{} \displaystyle n_{\pm}=n\pm(\delta n)\mbox{} \displaystyle(\delta n)=(2-\cosh 2\tilde{z}){\rm\,sech\,}^{4}\tilde{z}\times\frac{\beta_{0}B_{0}}{2L}\mbox{} \displaystyle\rho_{e}=2(\delta n)\mbox{} \displaystyle\beta_{EM}=\frac{{\bf E}\times{\bf B}}{B^{2}}=\left\{0,\beta_{0}{\rm sech}^{2}\tilde{z},0\right\}\mbox{} \displaystyle v_{d}=\frac{B_{0}}{2Ln}{\rm sech}^{2}\tilde{z}\mbox{} \displaystyle\left.\nabla\times{\bf B}\right|_{y}=(n_{p}+n_{e})v_{d}\mbox{} \displaystyle\rho_{e}{\bf E}+(\nabla\times{\bf B})\times{\bf B}+\nabla p=0\mbox{} \displaystyle\Phi=\frac{L}{2}{\rm\,sech\,}^{2}\tilde{z}\beta_{0}B_{0} (6) Drift velocity v_{d} is positive for positrons and negative for electrons. We stress that for charged Harris layer, both the overall density n and density of each component n_{\pm} are z -dependent. The 4-current is space-like, \rho_{e}^{2}-j^{2}\leq 0 . Total electric charge is zero in each semi-space; it is composed of layer of negative charge |\tilde{z}|\leq 0.65847 of value Q=2\times 0.384\beta_{0}B_{0} , and opposite at larger z . Importantly, electric potential \Phi has a maximum in