Multifrequency Floquet Engineering of Magnon Polaritons Preprint: APS/123-QED

L. Hackner, A. R. Myatt, W. Wustmann, N. J. Lambert · 2026

Read Multifrequency Floquet Engineering of Magnon Polaritons Preprint: APS/123-QED by L. Hackner, A. R. Myatt, W. Wustmann, N. J. Lambert (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-05576.txt.

Introduction

Magnon polaritons mix magnetic waves with microwave light inside a cavity, creating a hybrid excitation. L. Hackner, A. R. Myatt, W. Wustmann, and N. J. Lambert reshape that hybrid's spectrum by shaking the cavity instead of the magnet. Modulating the magnon frequency directly needs a varying magnetic field, which is technically awkward.

They modulate the microwave cavity frequency, reaching large depth and bandwidth. Two drive tones, at twice and three times a base frequency, produce spectra that depend on their relative size and phase. New anticrossings appear between sidebands that single-frequency driving leaves uncoupled.

Catalog record

CREATORL. Hackner, A. R. Myatt, W. Wustmann, N. J. Lambert
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.05576

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multifrequency Floquet Engineering of Magnon Polaritons Preprint: APS/123-QED L. Hackner, A. R. Myatt, W. Wustmann, N. J. Lambert Abstract Floquet engineering of cavity magnon-polaritons by periodically modulating the magnon frequency has recently attracted much interest as a way to manipulate the energy spectrum of magnon-photon hybrid systems. However, modulating the frequency of magnons by a time-varying bias magnetic field can be challenging. We demonstrate cavity magnon-polariton Floquet engineering by modulating the microwave cavity frequency, allowing large modulation depth and bandwidth. We apply commensurate two-frequency Floquet modulations with the higher frequency at twice and three times the lower frequency, and demonstrate that the resulting spectrum depends on the relative amplitude and phase of the two drive tones. In comparison with single-frequency Floquet modulations, the spectrum has qualitatively different features; in particular, new anticrossings appear between previously uncoupled sidebands. Our platform offers an alternative way to manipulate Floquet quasi-energy levels in hybrid systems. Cavity electromagnonic systems are a promising emerging platform for quantum technologies 1 ; 2 . In these hybrid devices, a magnetically ordered material exhibiting well-defined magnetostatic resonances is embedded in an electromagnetic cavity or resonator such that the supported magnons can exchange energy with the photons. If the mode overlap between the two excitations is sufficiently large, the coupling rate between the two exceeds the dissipation rates in the system, and the strong coupling regime is reached 3 ; 4 ; 5 ; 6 . Judicious selection of cavity or magnon host material can allow ultrastrong coupling to be observed 7 ; 8 . The resulting hybrid excitations are termed magnon-polaritons, and demonstrations of hybrid devices based on magnons have included strong coupling between magnons and qubits 9 , strong coupling between spatially separated magnon populations 10 , and non-reciprocal devices 11 ; 12 . They have been proposed as a candidate platform for a variety of quantum technologies including coherent transducers 13 ; 14 ; 15 ; 16 and quantum memories 17 ; 18 ; 19 . There has been significant recent interest in temporal periodic modulation of the parameters of cavity electromagnonic systems, resulting in changes in their dynamics. This powerful technique, termed Floquet engineering, introduces controllable quasienergy levels into the system’s spectrum. Despite the significant experimental difficulties associated with rapid tuning of the magnon modes, there have been a number of demonstrations of Floquet physics in magnonic systems 20 . The technique has been applied to a range of problems, such as the engineering of magnon dark modes 21 , controllable magnon-magnon coupling 22 , and the generation of entangled states 23 ; 24 . The new energy bands created are also of more fundamental interest; they have non-trivial topological properties 25 ; 26 ; 27 , and have been demonstrated to exhibit novel phases 27 . Recently, the difficulty of achieving large frequency modulations was tackled by using a resonantly-enhanced drive field 28 . However, there remain significant experimental challenges associated with rapid tuning of the magnon modes. A time-varying magnetic field of a relatively large amplitude must be applied over the volume of the magnetic material, preferably via a coil or antenna with a low inductance and a flat frequency response over a broad range. Furthermore, the field should be as uniform as possible to avoid inhomogeneous broadening, of and coupling between, different magnetostatic modes 29 ; 30 . Here, we avoid the difficulties of modulating the magnon frequency by instead employing a rapidly tunable microwave resonator. Whilst the symmetry between the magnon and photon modes in the equations describing the system means that the underlying physics remains the same, our approach allows for large amplitudes and frequencies of modulation, and furthermore arbitrary and precisely controlled modulation waveforms can be applied. We use this approach to study dual-frequency Floquet driving of the hybrid system, focusing primarily on the case where one frequency is twice the other, and the case where one frequency is three times the other. Our device (Fig. 1 (a)) comprises a loop of coplanar waveguide on a low-loss printed circuit board (PCB) (Rogers 4003C) with an embedded amplifier (Mini-Circuits YSF-322+) and an in-phase/quadrature (IQ) demodulator (Marki Microwave MMIQ-0205HSM-2). We also add a backwards-wave stripline directional coupler (-16dB coupling, Mini-Circuits SCBD-16-63HP+) to the loop to provide coupling to a feedline. Resonant modes occur when the propagating microwave field undergoes a 2n\pi (where n is an integer) phase shift during one round trip of the loop. The phase shift has a controllable component due to the IQ demodulator; applying carefully calibrated voltages to the I and Q ports of the demodulator allows high bandwidth control of the frequency of the modes. The amplitude of the propagating wave is also dependent on the I and Q voltages, thus allowing control over the total energy loss per round trip and hence the internal loss rate of the cavity mode. (Here we keep the internal loss of the mode constant throughout.) Figure 1: Experimental setup and device characterisation. (a) Schematic the hybrid magnonic device comprising a microwave ring resonator with gain (Amp) and phase control (IQ), and an embedded YIG sphere (right). A vector network analyser (VNA) measures the transmission (S21) of a feedline, and an arbitrary waveform generator (AWG) allows the frequency of the cavity modes to be modulated. (b) |\mathrm{S21}| of uncoupled cavity mode spectrum under single tone frequency modulation as function of drive frequency \Omega/2\pi , with \omega_{c}/2\pi=$2.615\text{\,}\mathrm{GHz}$ , showing sidebands with minima coincident with Bessel function zeros (top axis, dotted lines.) (c) |\mathrm{S21}| as a function of applied magnetic field, with \omega_{c}/2\pi=$2.17\text{\,}\mathrm{GHz}$ , showing a magnon-photon anticrossing of size 2g/2\pi=$41.6\text{\,}\mathrm{MHz}$ . (d) |\mathrm{S21}| as a function of cavity frequency \omega_{c} , with magnetic field H_{\textrm{dc}} fixed at 69\text{\,}\mathrm{mT} , again showing an anticrossing. (e) |\mathrm{S21}| as a function of Floquet drive frequency \Omega/2\pi , with \omega_{c}/2\pi=\omega_{m}/2\pi=$2.17\text{\,}\mathrm{GHz}$ and a/2\pi=$50\text{\,}\mathrm{MHz}$ . (f) |\mathrm{S21}| of feedline as a function of probe frequency and Floquet drive amplitude, with \omega_{c}/2\pi=\omega_{m}/2\pi=$2.17\text{\,}\mathrm{GHz}$ , and \Omega/2\pi=$41.4\text{\,}\mathrm{MHz}$=2g/2\pi , corresponding to the dashed line in panel (e). A polished yttrium iron garnet (YIG) sphere 1 1 1 www.ferrisphere.com of diameter 1\text{\,}\mathrm{mm} is inserted between the centre conductor and the ground plane of the waveguide loop such that the magnetic field component of the microwave field through the sphere is normal to the PCB. YIG is a common material for hybrid magnonic devices due to its high spin density and low loss, helping to reach the strong coupling regime between magnons and photons; a spherical geometry gives a well understood family of modes 32 ; 33 . To calibrate the I and Q voltages required for a particular set of cavity parameters, the magnon population is detuned from the cavity by applying a magnetic field such that the magnon frequency \omega_{m}/2\pi is above 4\text{\,}\mathrm{GHz} . We apply static voltages from an arbitrary waveform generator (AWG) and measure the transmission spectrum of the feedline from port 1 to port 2 (S21) using a vector network analyser (VNA), as in Fig. 1 (a). We observe an absorption dip due to the cavity resonance, and determine the centre frequency and linewidth from a Lorentzian fit. By iteratively tuning the applied voltages until the centre frequency and linewidth of the resonance matches a particular target frequency and

Read the complete text