Astrophysical X-Ray Polarization

Philip Kaaret and Brian D. Ramsey · 2026

Read Astrophysical X-Ray Polarization by Philip Kaaret and Brian D. Ramsey (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-05355.txt.

Introduction

Philip Kaaret and Brian Ramsey review the young field of astrophysical X-ray polarimetry, which measures the polarisation of high-energy light from space. Adding polarisation fraction and angle to the usual measurements reveals new information about accretion flows and magnetic fields in extreme astrophysical systems. That extra geometry is hard to obtain any other way.

The review first covers the physical processes that produce polarised X-rays in astrophysical settings. It then explains the physical principles used to measure X-ray polarisation in practice. Finally, it surveys the detectors that have already flown and those under construction, giving newcomers a map of the instruments defining this observational window.

Catalog record

CREATORPhilip Kaaret and Brian D. Ramsey
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE44 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.05355

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Astrophysical X-Ray Polarization Philip Kaaret and Brian D. Ramsey Abstract X-ray polarimetry is now providing a new way to look at the high energy sky. The addition of two observables, polarization fraction and angle, reveals crucial new information on the structure of accretion flows and magnetic fields in astrophysical systems. Here, we review the basic physical processes that produce polarized X-rays in astrophysical contexts. Then, we briefly describe the physical processes used to measure X-ray polarization and the detectors that have been flown or are under construction. 0.1 Introduction X-ray polarization conveys information on the geometry of high-energy astrophysical sources and the emission processes at work. The polarization signal may reflect the physical distribution of the emitting matter, the arrangement of the magnetic or radiation fields, or even the geometry of space-time. The information that can be gleaned via X-ray polarimetry provides insights unavailable from other observational techniques, often with significant implications for our understanding. In the past decade, X-ray polarization has blossomed from confident detection of a single source, the spatial average from the Crab nebula Novick1972 ; Weisskopf1978 , to detections or model-constraining upper limits on dozens of sources distributed across many different classes of astrophysical objects. The largest contribution has come from the launch and successful operation of the Imaging X-ray Polarimetry Explorer (IXPE, see Chapter 14). As of this writing over 350 IXPE-related refereed papers have been published with over 6000 citations. These new X-ray polarization results have provided fundamentally new information and often challenged our pre-existing views. This chapter provides an introduction for those previously unfamiliar with X-ray polarimetry. After a brief discussion of how to describe polarized X-rays (Section 0.2 ), we introduce the primary physical mechanisms that generate polarized emission in astrophysical objects (Section 0.3 ). Then, we describe the physical processes used to measure X-ray polarization and detectors utilizing those processes (Section 0.4 ). 0.2 Description of Polarized X-Rays X-rays are discrete packets of electric and magnetic fields oriented transverse to the direction of motion. Polarization describes the configuration of the fields. Since the electric and magnetic fields are interrelated by Maxwell’s equations, it is sufficient to specify only the configuration of the electric field. The electric field of an X-ray propagating along the z -axis can be described as \displaystyle\vec{E}=\hat{x}E_{X}+\hat{y}E_{Y}=\hat{x}E_{0X}\cos(kz-\omega t)+\hat{y}E_{0Y}\cos(kz-\omega t+\xi). (1) where the angular frequency ( \omega=2\pi E/h ) and the wavenumber ( k=\omega/c=2\pi E/hc ) are both determined by the photon energy ( E ) KaaretWSPC . For a photon moving in an arbitrary direction, the wavevector ( \vec{k} ) is defined with magnitude equal to the k and direction along the photon momentum. The polarization is determined by the phase offset ( \xi ) and the ratio of amplitudes between the two electric field components. When \xi=n\pi , where n is an integer, then E_{X} and E_{Y} are exactly in phase (or antiphase) and their amplitudes are always proportional. The photon is then described as linearly polarized. If \xi\neq n\pi , then the fields rotate as the photon propagates. This is elliptical polarization. Circular polarization is the special case of elliptical polarization with E_{0X}=E_{0Y} . The net polarization of a set of photons from a source are fully characterized by the four Stokes parameters: \displaystyle I=\langle E_{0X}^{2}\rangle+\langle E_{0Y}^{2}\rangle (2) \displaystyle Q=\langle E_{0X}^{2}\rangle-\langle E_{0Y}^{2}\rangle (3) \displaystyle U=\langle 2E_{0X}E_{0Y}\cos\xi\rangle (4) \displaystyle V=\langle 2E_{0X}E_{0Y}\sin\xi\rangle (5) where the averages are over the photons detected from the source and may be calculated in specific bins of energy, time, pulse or orbital phase, etc. Stokes I is the total intensity. This is the same intensity as measured by instruments insensitive to polarization. Stokes Q and U describe linear polarization. Stokes V describes elliptical polarization. Since all X-ray polarimeters flown to date are sensitive only to linear polarization, we will not consider elliptical polarization further. Figure 1: Polarization ‘ellipse’ diagram for linearly polarized radiation. The figure shows a view of the photon electric field looking into the beam; the z-axis is out of the page. The electric field ( \vec{E} ) is shown for polarization angle (EVPA) \phi=30^{\circ} . Also shown are the electric field orientations for q=+1\rightarrow\phi=0^{\circ} , u=+1\rightarrow\phi=45^{\circ} , q=-1\rightarrow\phi=90^{\circ} , u=-1\rightarrow\phi=135^{\circ} . The normalized Stokes parameters for linear polarization are q=Q/I and u=U/I . These range between +1 and -1 . For linear polarization, the polarization fraction (also referred to as the polarization degree) is \Pi=\sqrt{Q^{2}+U^{2}}/I=\sqrt{q^{2}+u^{2}} and is often quoted as a percentage. The electric vector position angle (EVPA), also referred to as the polarization angle, is \phi=\tfrac{1}{2}\arctan(U/Q)=\tfrac{1}{2}\arctan 2(U,Q) . EVPA is defined modulo a 180 ∘ rotation. The electric field configurations for various values of q and u are shown in Fig. 1 . Note that a change in sign of q or u rotates \vec{E} by 90^{\circ} . 0.3 Emission of Polarized X-Rays Interpretation of the X-ray polarization measured from an astrophysical source requires an understanding of physical processes that produce the X-radiation. Here, we provide brief descriptions of the some physical processes that produce polarized X-rays in high-energy astrophysical objects. 0.3.1 Thomson/Compton scattering Scattering between photons and electrons is a key process in the generation of the X-rays that we observe from many astrophysical systems. For example, active galactic nuclei and accreting stellar‑mass black holes produce X-rays via scattering in accretion disks and hot coronae. The polarization of the observed X-rays is determined by the geometry and other properties of the scattering medium. Hence, X-ray polarimetry can provide information on the structure of accretion flows in astrophysical objects. Scattering between photons and free electrons is labeled as Thomson, Compton, or inverse-Compton. Thomson scattering is the elastic limit where the photon energy ( E ) is unchanged by the scatter and occurs in the non-relativistic limit when E\ll m_{e}c^{2} , where m_{e} is the electron mass. Compton scattering is the inelastic case where energy is transferred between the photon and electron. The term ‘inverse-Compton scattering’ is often used when energy is transferred from electrons to photons. We begin with the simplest case, that of Thomson scattering, shown in Fig. 2 . The electric field of the incident photon causes the electron ( e^{-} ) to oscillate. The resulting acceleration ( \vec{a} ) of the electron produces radiation in the form an outgoing photon ( k_{\rm out} ). The scattering angle ( \theta ) is defined by the wavevector of the incoming ( \gamma_{\rm in} ) and outgoing ( k_{\rm out} ) photons. The scattering plane contains both k_{\rm in} and k_{\rm out} . Photons from an unpolarized source have electric fields in the plane perpendicular to k_{\rm in} and are able to accelerate ( \vec{a} ) the electron in the same plane. The electric field of the photon k_{\rm out} produced by acceleration of the electron, must therefore also lie in the plane perpendicular to k_{\rm in} . Figure 2: Geometry of Thomson Scattering. The source/incoming photon (left) interacts with an electron (center) producing a scattered/outgoing photon (right, lower right, and near). Blue vectors indicate photon momenta while orange vectors indicate photon electric fields ( \vec{E} ). Red vectors ( \vec{a} ) indicate acceleration of the electron (black circle e^{-} ). The scattering angle ( \theta ) is defined by the wavevectors of the incoming ( k_{\rm in} )

Read the complete text