Release-free electro-optomechanical crystal modulator Journal: opticajournal
Paul Burger, Joey Frey, Johan Kolvik, Mads B. Kristensen, Raphaël Van Laer · 2026
Read Release-free electro-optomechanical crystal modulator Journal: opticajournal by Paul Burger, Joey Frey, Johan Kolvik, Mads B. Kristensen, Raphaël Van Laer (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-05190.txt.
Introduction
Burger and four colleagues show a microwave-to-light device that needs no release step. Electro-optic modulators link microwave circuits to optical fibers. At the quantum limit, single photons convert between domains, which could share linked states between superconducting processors. High-confinement optomechanical crystals promise that interface, but optical absorption heats them, and release-free designs anchor heat better yet had never joined a microwave-optical transducer. The team prints a release-free silicon crystal onto lithium niobate by micro-transfer printing.
The device pairs strong light-motion coupling in silicon with efficient piezoelectricity in lithium niobate. Measured coupling rates suit quantum-level work alongside a superconducting microwave circuit. By keeping the crystal anchored while still converting signals, the work moves release-free devices of this kind closer to practical quantum interfaces.
Catalog record
| CREATOR | Paul Burger, Joey Frey, Johan Kolvik, Mads B. Kristensen, Raphaël Van Laer |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.05190
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Release-free electro-optomechanical crystal modulator Journal: opticajournal Paul Burger, Joey Frey, Johan Kolvik, Mads B. Kristensen, Raphaël Van Laer Abstract Electro-optic modulation is central to classical optical communications and emerging quantum technologies. High-confinement optomechanical crystal modulators enable microwave–optical transduction through strong optomechanical interactions and offer a promising interface between superconducting qubits and optical fibers. However, their performance is limited by thermal noise from optical absorption. Release-free optomechanical crystals provide improved thermal anchoring but have not yet been integrated into a microwave–optical transducer. Here, we demonstrate a release-free electro-optomechanical transducer combining strong optomechanical interactions in silicon with the efficient piezoelectricity of lithium niobate via micro-transfer printing. We observe electro- and optomechanical coupling rates compatible with quantum-level operation when co-integrated with a superconducting microwave circuit. This advance moves release-free electro-optomechanical devices toward practical microwave–optical interfaces. \dates Dated: August 10, 2026 1 Introduction Electro-optic modulators connect microwave-frequency electrical signals with optical fields. They combine the low-loss transmission of photons in optical fiber with the strong nonlinearities and high-fidelity processing available in microwave circuits. This interface underpins classical communication systems and is emerging as a key building block for quantum technologies. Today, electro-optic modulators rely on strong microwave drives to establish data links. However, significant efforts aim to push them toward the quantum limit, where individual microwave and optical photons can be interconverted [ 19 , 10 , 21 , 31 , 26 , 27 , 30 , 2 , 25 ] . In this regime, electro-optic interfaces could distribute entanglement between remote superconducting quantum processors, which are leading candidates for error-corrected quantum technologies but face scaling challenges [ 15 , 16 ] . Physical mechanisms enabling the microwave-to-optical photon conversion include the electro-optic effect, the Faraday effect and atomic transitions [ 9 ] . Electro-optomechanical transducers utilize an intermediary mechanical mode in the transduction chain. They are attractive three-wave-mixing elements given their potential for wavelength-scale co-localization of optical and mechanical fields resulting in strong optomechanical interaction rates, low power consumption and small footprint [ 5 , 24 ] . In the past years transducers based on suspended optomechanical crystals (OMCs) have become increasingly advanced and are now capable of quantum experiments including optically heralded microwave photon addition [ 10 ] and non-classical microwave–optical photon pair generation [ 19 ] . A major challenge is the noise created by heating of the mechanical mode due to parasitic absorption of the optical pump required for the optomechanical three-wave-mixing. This issue is compounded by the fact that state-of-the-art OMCs are suspended, i.e. thermally disconnected from the substrate. While enabling record mechanical lifetimes [ 17 ] , the release of the device layer complicates the fabrication and ultimately limits the thermal anchoring. Two-dimensional suspended OMCs [ 22 , 18 , 28 ] have shown improved thermal anchoring, though their thermal noise levels remain a limitation and their increased geometric complexity contributes to the challenge of realizing robust transducers. Figure 1: Release-free electro-optomechanical transducer in silicon-on-insulator. a) Principle of the transduction process. An optical waveguide is evanescently coupled to an optical mode \hat{a} which optomechanically interacts with mechanical mode \hat{b} . The latter is connected to a microwave line through piezoelectric conversion. b) Material stacks in the optomechanical and electromechanical regions. c) Normalized transversal optical field, E_{y} , and mechanical displacement field, \mathbf{u} , of the simulated transducer design. d) Scanning electron microscope image of a comparable device (scale bar: 10\ \mu\rm m ). The inset shows a false-colored zoom-in of the electro-optomechanical region (scale bar: 1\ \mu\rm m ). Here, we pursue an alternative approach in which the device layer remains attached to a silicon dioxide substrate, improving thermal anchoring and power handling compared to suspended OMCs [ 13 , 14 ] . With careful choice of the momentum-space operating point it is possible to confine and couple mechanical and optical waves in this release-free architecture, even in presence of the substrate [ 3 ] . In this work, we experimentally demonstrate a chip-scale release-free electro-optomechanical crystal transducer – building on the optomechanical component and design developed previously [ 13 , 14 , 3 ] . The nanophotonic device is implemented on a silicon-on- \rm SiO_{2} platform ( \rm SOI ), heterogeneously integrated with thin-film lithium niobate via micro-transfer-printing [ 4 , 23 ] . Beyond quantum transduction this device type may be used for applications in classical readout of superconducting microwave circuits and low-power classical electro-optic modulation [ 29 , 20 ] . As a proof of principle for the transducer as an electro-optic interface, we also demonstrate classical signal transmission. 2 Design In the following, we outline the transducer design briefly. A more detailed description of the design process can be found in [ 3 ] . The device consists of two regions: In the optomechanical region optical photons and phonons interact via spontaneous parametric up/down-conversion. The process is described by the linearized optomechanical interaction Hamiltonian: \hat{\mathcal{H}}_{\rm om}=\hbar g_{\mathrm{om}}\sqrt{n_{\mathrm{c}}}(\hat{a}+\hat{a}^{\dagger})(\hat{b}+\hat{b}^{\dagger}) , with \hat{a} and \hat{b} the photonic and phononic ladder operators, g_{\mathrm{om}} the vacuum optomechanical interaction rate and n_{\mathrm{c}} the number of photons in the optical mode (Fig. 1 a) [ 1 ] . In the electromechanical region, phonons and microwave photons are converted into one another via the piezoelectric effect at a rate \gamma_{\mathrm{m,e}} [ 12 ] . The two regions combine to a resonant one-stage transducer, in which optical photons can be converted into microwave photons using phonons as an intermediary [ 9 ] . To enhance the three-wave-mixing interaction and reduce the power dissipation [ 24 ] the device is realized as an optomechanical crystal cavity. The presence of the substrate requires revisiting the conditions for mechanical confinement and optomechanical phase-matching [ 3 ] . This leads us to use mechanical modes near the X-point, phase protected from the continuum of radiation modes in the substrate. We target optical wavevectors at half the mechanical wavevector, k_{\mathrm{m}}=2k_{\mathrm{o}} , enabling coupling between a mechanical wave and counter-propagating optical waves in the cavity. The entire device is realized as a beam of silicon which is periodically patterned with elliptical holes to allow tuning the optical and mechanical band structures. The patterning also softens the device layer allowing confinement of the mechanical motion in silicon despite the intrinsically lower speed of sound in the substrate. The electromechanical region additionally features a lithium niobate thin film on top of the silicon along with a short interdigitated capacitor of two periods (Fig. 1 b-d). While the electromechanical and overall device efficiency could be boosted with a longer electromechanical region, we work with a short region here for compatibility with low-loss superconducting qubits [ 3 , 7 ] . We simulate the optical and piezo-mechanical properties using finite-element simulations. The device features a C-band optical mode localized in the optomechanical region and a mechanical mode which is hybridized between both optomechanical and electromechanical regions (Fig. 1 c). We simulate the vacuum optomechanical coupling rate to be g_{\mathrm{om}}/(2\pi)=297\ \text{kHz} , while the electromechanical decay rate into a Z_{0}=50\ \Omega feedline is simulated at \gamma_{\mathrm{m,e}}/(2\pi)=1.1\ \text{kHz} . 3 Measurement Figure 2: Room-temperature electro-optic transduction. a) Mechanical spectrum while a constant frequency microwave tone is applied to the piezoelectric section. The colors correspond to varying microwave power as shown in b). b) Phonon numbers