The Saturable Electronic Reluctance Switch: Switchable low-power and low-noise generation of magnetic fields using permanent magnets
P.D. Taylor-Burdett, C.A. Burhan, S. Mason, F.R. Lebrun-Gallagher, S. Weidt, W.K. Hensinger · 2026
Read The Saturable Electronic Reluctance Switch: Switchable low-power and low-noise generation of magnetic fields using permanent magnets by P.D. Taylor-Burdett, C.A. Burhan, S. Mason, F.R. Lebrun-Gallagher, S. Weidt, W.K. Hensinger (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-05158.txt.
Introduction
P Taylor-Burdett and five co-authors present a device for switching a permanent magnet's field on and off with very low power and very low noise. Many experiments need magnetic fields that are both ultra-stable and switchable. Wires are switchable but noisy, while existing ways to switch permanent magnets need large pulses and waste power, especially at high switching rates.
Their Saturable Electronic Reluctance Switch routes the magnet's flux through a nonlinear ferromagnetic circuit. The field ramps smoothly with current up to a threshold, then holds constant, shielding stability from current noise and avoiding demagnetisation. The authors expect far lower power per switching cycle than existing approaches, plus robustness to fabrication errors.
Catalog record
| CREATOR | P.D. Taylor-Burdett, C.A. Burhan, S. Mason, F.R. Lebrun-Gallagher, S. Weidt, W.K. Hensinger |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 50 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.05158
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The Saturable Electronic Reluctance Switch: Switchable low-power and low-noise generation of magnetic fields using permanent magnets P.D. Taylor-Burdett, C.A. Burhan, S. Mason, F.R. Lebrun-Gallagher, S. Weidt, W.K. Hensinger Abstract Across many areas of science, there is a need to generate magnetic fields that are both ultra-stable and switchable “on” and “off”. While permanent and superconducting magnets offer exceptionally low-noise fields, they are not readily switchable. Conversely, electromagnets are switchable but are susceptible to current noise. We present a hybrid technique to switch the field of any arbitrary magnet through use of a non-linear ferromagnetic circuit, named the ‘Saturable Electronic Reluctance Switch’ (SERS). The circuit achieves bi-stable switching of the field by applying a current above a given threshold, akin to a transistor for magnetic fields. Crucially, the applied current has minimal influence on the magnetic field output and demagnetisation of the magnet is avoided, drastically reducing power dissipation. SERS is also robust to fabrication errors, suppressing noise in the control current by several orders of magnitude in a non-ideal device. To illustrate its application, a SERS-driven device is proposed for generating ultra-stable magnetic field gradients in a scalable trapped-ion quantum computer. We find this device offers an order of magnitude reduction in power dissipation compared to state-of-the-art current carrying wires, while reducing magnetic field noise originating from current fluctuations by up to five orders of magnitude. keywords magnetic field switching, hybrid magnetic devices, ferromagnetic circuits, low-noise magnetic fields, magnetic field gradients, trapped ions, quantum technologies, atomic and molecular physics Introduction Across many applications that require generation of static magnetic fields, there is a recurring trade-off between achieving a field that is highly stable and simultaneously switchable. Important cases are found in the fields of atomic, molecular and optical physics, where fluctuations in applied magnetic fields are a significant consideration. One example in quantum information processing involves trapped-ion quantum computing using the Magnetic Gradient Induced Coupling (MAGIC) scheme 27 ; 29 with Zeeman-sensitive qubits in a quantum charged coupled device (QCCD) type architecture, yielding a promising avenue for scalable quantum computing 21 . Here, fluctuations in the applied static magnetic fields limit the achievable coherence times and gate fidelities 38 . Permanent magnets produce exceptionally low-noise fields, enabling record-breaking coherence times in trapped ions 40 ; 32 . Yet, a large-scale QCCD architecture will likely require zeroing the applied magnetic fields during fast ion-transport through gate zones to prevent qubit state dephasing 39 ; 7 . Current-carrying wire (CCW) electromagnets enable switchable magnetic fields 34 , but suffer from technical noise and necessitate the development of sophisticated ultra-low noise current supplies 26 ; 22 ; 28 ; 44 . This apparent dichotomy between stability and bandwidth can be found in experiments involving atom traps 15 ; 18 , quantum metrology 5 ; 42 , atomic clocks 35 ; 42 , Bose-Einstein condensates 14 , quantum interferometry 13 ; 30 , Feshbach resonances 6 , penning traps 24 ; 20 and nanoMRI 33 , to name a few. Several non-mechanical methods of switching the field of a permanent magnets exist, including degaussing and re-magnetisation of the magnet 43 , superposition of the magnet field with an electromagnet 19 and electro-permanent magnet assemblies 19 ; 11 . However, each of these methods involve irreversibly cycling the magnetisation of hard ferromagnet materials with large hysteresis, which typically requires extremely large magnetic field pulses and creates excessive power dissipation. In addition, the magnetising coils are often arranged in a way that influence the output field. Figure 1: Cross-section of a Saturable Electronic Reluctance Switch magnetic circuit, illustrating the operating principle in the low-field “OFF” (top) and high-field “ON” (bottom) states. Switching is actioned by driving two shunt cores into full saturation using anti-parallel solenoids. In the OFF-state, flux from a permanent magnet is directed through shunts with high magnetic permeability. When a driving current around the shunts is switched on, the shunts lose their permeability and the flux is instead directed towards an air-gap output region. By magnetising the shunts along a single axis, full saturation is achieved, ensuring permeability remains constant in the ON-state. The anti-parallel solenoid orientation ensures zero net contribution of the solenoid fields at the air-gap, eliminating current dependency. In this work we present a non-mechanical, low-power and truly bi-stable method of switching the magnetic field generated by a magnet at the air-gap of a ferromagnetic core. Called the Saturable Electronic Reluctance Switch (SERS), the device exploits the non-linearity of ferromagnets, magnetisation directionality and symmetry to switch the magnetic field of a permanent magnet between high-field (ON) and low-field (OFF) states, as shown in Fig. 1 . This relatively simple magnetic circuit creates an output field that is remarkably insensitive to the applied current. In addition, demagnetisation of the magnet magnet is avoided, enhancing output repeatability between switching cycles and reducing power dissipation. Saturable Electronic Reluctance Switch Figure 2: a) Schematic of a simple Saturable Electronic Reluctance Switch (SERS) device. The device contains a primary soft ferromagnetic core of cross-sectional area A_{\text{p}} that provides two paths, P1 and P2, for the magnetic flux, \Phi_{m} , of a permanent magnet of length \ell_{m} and area A_{m} . P1 contains two high-permeability shunts, S1 and S2, of area A_{s} and length \ell_{s} . Each shunt is tightly wound with an N -turn solenoid carrying current a \eta_{n}I , where \eta_{n}=(-1)^{n} . P2 contains and air-gap of length \ell_{g} and area A_{g} , where the experiment requiring a switchable field is located. b) An idealised magnetic circuit model of the device, excluding primary core reluctance. A key property of soft ferromagnets is their ability to guide magnetic flux. In magnetic circuit terms, they provide a low-reluctance path through space, with reluctance defined by \mathcal{R}=\ell/\mu A , where \ell and A the respective length and cross-sectional area of the path and \mu the medium’s permeability. At low magnetisation, soft ferromagnets can display permeabilities as high as 10^{5} times that of vacuum, \mu_{0} 17 . Such permeabilities arise from the ease with which the ferromagnet’s internal magnetic moments are able to reconfigure to an applied field. However, the density of magnetic moments within the ferromagnet provide a fundamental limit to its magnetisation, leading to a maximum saturation flux density, B_{\textrm{sat}} . When fully saturated along a single axis, no further changes in magnetisation along the same axis can occur. Any additional field applied along this axis is subject to a constant permeability of \mu=\mu_{0} . The magnetisation stability obtained in full single-axis saturation is the key principle exploited by the SERS method. A basic configuration for the SERS device is shown in Fig. 2 (a) with its idealised magnetic circuit shown in Fig. 2 (b). The circuit contains three key elements: a magnet, an air-gap section and a shunt section. These are connected in parallel by a high permeability ferromagnetic “primary” core. The magnet, e.g. a permanent-magnet, a superconducting magnet or a solenoid, provides the air-gap field to be switched. The air-gap contains the experimental operating region where the switchable magnetic field is required. The shunt section consists of a series of solenoid-wound high permeability ferromagnetic cores configured to magnetise in anti-parallel directions. This section magnetically connects the two poles of the primary core, effectively closing