From Defects to Devices: Design Guidelines for High-Performance Diamond-Based Solar Cells and Single-Dopant Diodes Journal: Nano Energy
Matúš Kaintz, Antonio Cammarata · 2026
Read From Defects to Devices: Design Guidelines for High-Performance Diamond-Based Solar Cells and Single-Dopant Diodes Journal: Nano Energy by Matúš Kaintz, Antonio Cammarata (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-04942.txt.
Introduction
Matúš Kaintz and Antonio Cammarata set out design guidelines for diamond-based solar cells and single-dopant diodes, devices built around chosen defects in diamond crystals. They study two designs from first principles: a solar cell using a boron-vacancy-boron absorber, and a diode based on phosphorus-vacancy defects. Both defects create useful energy levels inside the material.
For the solar cell they advise aligning light to exploit uneven absorption, grading the junctions, and aiming for an absorber about five hundred nanometres thick. For the diode, impurity-band conduction suits tunnel-style uses, and its heat response could aid thermal management. Single-dopant junctions, they note, would simplify manufacturing greatly.
Catalog record
| CREATOR | Matúš Kaintz, Antonio Cammarata |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 96 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.04942
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
From Defects to Devices: Design Guidelines for High-Performance Diamond-Based Solar Cells and Single-Dopant Diodes Journal: Nano Energy Matúš Kaintz, Antonio Cammarata Abstract This work establishes key technological guidelines for designing diamond-based optoelectronic devices, derived from a first-principles investigation of two architectures: a PIN junction with a boron-vacancy-boron (BVB) intermediate-band absorber, and a PN junction based on phosphorus-vacancy (PV) defects. For the PIN solar cell, practical design principles include: i ) aligning incident light in the xz -plane to exploit anisotropic absorption; ii ) using graded junctions to mitigate tunnelling losses at abrupt interfaces; iii ) targeting an absorber thickness of ∼ \sim 500 nm to balance absorption and carrier extraction; and iv ) leveraging the high transparency of both contact layers for bifacial device configurations. For the PN diode, the PV-doped diamond operates via impurity-band conduction, making it suitable for degenerate p-type applications such as tunnel diodes or asymmetric junctions, while its temperature-dependent Seebeck anisotropy and sign-reversal offer opportunities for thermal management applications. When paired with phosphorus-doped n-type regions, these defects enable single-dopant junctions that significantly simplify device manufacturing. Using density functional theory with GW corrections, Bethe-Salpeter equation calculations and carrier transport modelling coupled to device electrostatics via a Poisson solver, we show that the BVB defect introduces intermediate bands without degrading diamond’s high carrier mobility or thermal conductivity, while PV-doping provides high conductivity at room temperature through impurity-band transport. Overall, both defect-engineered systems preserve diamond’s superior transport and thermal properties even after doping, offering viable pathways for high-performance diamond optoelectronics. These guidelines provide a practical foundation for fabricating efficient diamond-based photovoltaic and diode devices. 1 Introduction Owing to its ultra-wide band gap and exceptional transport properties, diamond occupies a unique position among semiconductor materials. Its combination of high carrier mobility, extreme thermal conductivity, large breakdown field, and chemical and radiation stability enables device operation under conditions that challenge conventional semiconductors [ 1 , 2 , 3 , 4 , 5 ] . These properties enable a wide range of applications, including high-frequency field-effect and bipolar transistors [ 6 , 7 ] , high-power radio-frequency amplification [ 8 ] , Schottky and PIN diodes [ 9 , 10 , 11 ] , electronic switches [ 1 , 3 ] , electrochemical electrodes [ 4 ] , and radiation detectors [ 5 ] . Beyond electronic and sensing applications, these same properties also make diamond an attractive platform for energy conversion technologies. In particular, its wide band gap and exceptional transport properties suggest that it could serve as a suitable host for intermediate-band (IB) solar cells, a concept proposed to overcome the Shockley-Queisser limit of conventional single band gap devices [ 12 ] . In single band gap solar cells, a significant portion of the solar spectrum is either not absorbed due to photon energies being below the bandgap or is inefficiently utilised due to carrier thermalisation for photon energies above the bandgap. Introducing intermediate bands within the band gap enables absorption of sub-bandgap photons by providing stepping-stone transitions between the valence and conduction bands. In addition, the intermediate-band concept enables the use of wide band gap semiconductors, thereby improving the utilisation of high-energy photons [ 13 , 14 , 15 , 16 , 17 ] . The wide band gap of diamond (5.47 eV) is particularly attractive in this context, as it can host multiple intermediate bands, potentially enabling a large number of optical transitions and high theoretical conversion efficiencies. To this aim, the first objective of this work is to explore the potential of deep-level impurities in diamond for applications in IB photovoltaics. Specifically, we propose a PIN device architecture in which the intrinsic (I) region consists of diamond containing intermediate bands. Achieving the desired electronic and optical properties requires controlled introduction of impurities into the diamond lattice to define all three regions of the device. The most promising candidates are selected based on our previous study of substitutional dopants and defect complexes in diamond [ 18 ] . The P- and N-region are based on boron- and phosphorus-doped diamond, respectively, as both exhibit low activation energies and can be incorporated at high concentrations [ 19 , 20 ] . The I-region is based on the boron-vacancy-boron (BVB) defect, which introduces multiple intermediate bands suitably distributed within the band gap [ 21 , 18 ] . Although direct experimental realisation of BVB complexes remains limited, their formation can be understood based on established defect physics. Boron-vacancy (BV) complexes are well studied in diamond [ 22 , 23 ] , while boron-boron (B 2 ) pairs are known to form at high doping concentrations [ 24 ] . Furthermore, previous studies indicate that BVB configurations are energetically more favourable than isolated BV complexes [ 21 , 18 ] . Combined with the well-established mechanism of vacancy capture by impurity centres under typical growth and annealing conditions (e.g. in the case of nitrogen-related defects [ 25 ] ), this suggests that BVB complexes can form in diamond under appropriate conditions. The second objective of this work is to assess the feasibility of a PN junction based on a single dopant species. This approach could simplify semiconductor fabrication by eliminating the need for multiple dopants and reducing associated handling and contamination risks. In this design, phosphorus is used to form the N-region, while the P-region is realised using phosphorus-vacancy (PV) complexes. This enables a uniform doping strategy, where the P-region is created locally via vacancy engineering. The PV complex is particularly attractive, as it exhibits p-type behaviour, and diamond doped with vacancy-related defect complexes of comparable size is commonly synthesised [ 26 , 27 ] . Furthermore, previous studies suggest that the PV complex has a lower formation energy than substitutional phosphorus [ 28 , 18 ] . To model the proposed devices, we employ density functional theory (DFT) with GW correction to accurately describe the electronic structure. Optical properties are evaluated using the Bethe-Salpeter equation, while carrier transport is analysed via electron-phonon coupling calculations. The resulting first-principles data are then used as input for a Poisson solver to obtain the device-level electrostatics. Our approach provides first-principles-based framework for assessing the interplay between electronic structure, optical properties, transport, and device-level electrostatics, and establishes physically grounded design guidelines for diamond-based photovoltaic and diode architectures. 2 Computational details and methodology All calculations are performed by means of the abinit package [ 29 , 30 , 31 , 32 ] , within DFT, GW, Bethe-Salpeter equation (BSE) and electron-phonon coupling formalisms. Following previous studies [ 33 , 18 ] , we adopt the GGA-WC energy functional [ 34 ] for all of our DFT simulations, which provides the best agreement of lattice parameters and band gap in pristine diamond with experiments. The plane-wave energy cutoff is set to 816 eV. The Brillouin zone is sampled using a \Gamma -centred Monkhorst-Pack scheme [ 35 ] , with the k-point density scaled according to the supercell size, i.e. 15\times 15\times 15 for pristine diamond and 3\times 3\times 3 for 5\times 5\times 5 supercells. Furthermore, the Fermi-Dirac smearing is applied with a smearing temperature of 300 K. Self-consistent field (SCF) convergence is achieved when the total energy difference between successive iterations falls below 10^{-11} eV. To obtain ground-state