Lithium enrichment threatens to curb fusion deployment

S. H. Ward, R. J. Pearson, T. Scott, N. J. Lopes Cardozo1. Eindhoven University of Technology, Eindhoven, Netherlands2. School of Physics, University of Bristol, Bristol, United Kingdom · 2026

Read Lithium enrichment threatens to curb fusion deployment by S. H. Ward, R. J. Pearson, T. Scott, N. J. Lopes Cardozo1. Eindhoven University of Technology, Eindhoven, Netherlands2. School of Physics, University of Bristol, Bristol, United Kingdom (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-04707.txt.

Introduction

Samuel H. Ward and three co-authors analyse a supply problem that could slow the global rollout of nuclear fusion power: the lithium isotope lithium-6 is essential fuel for breeding tritium inside a reactor. Each plant consumes little lithium in operation, yet must hold a large enriched inventory on site.

That inventory, fifty to one hundred tonnes, combined with enrichment inefficiency, turns fuel into a major upfront capital cost, further magnified by financing. Today's enrichment technologies are also expensive, hard to scale, and environmentally risky, and highly enriched lithium-6 is a controlled substance. The authors discuss mitigations, including alternative enrichment technologies and reactor designs that ease the requirement.

Catalog record

CREATORS. H. Ward, R. J. Pearson, T. Scott, N. J. Lopes Cardozo1. Eindhoven University of Technology, Eindhoven, Netherlands2. School of Physics, University of Bristol, Bristol, United Kingdom
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.04707

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Lithium enrichment threatens to curb fusion deployment S. H. Ward, R. J. Pearson, T. Scott, N. J. Lopes Cardozo1. Eindhoven University of Technology, Eindhoven, Netherlands2. School of Physics, University of Bristol, Bristol, United Kingdom Abstract The impact of lithium isotopic enrichment on the global deployment of nuclear fusion energy is analysed. Lithium – the 6 Li isotope in particular – is essentially one of two elemental fuels required by fusion reactors for tritium breeding. Whilst variable consumption of lithium is low enough to present negligible cost, it is instead the large stored inventory volume (50-100 tonnes) and its required enrichment that compound to significantly drive capital costs. These costs are driven by the inefficiency of the tritium breeding process, making this challenge fundamental to almost all fusion power plant concepts. Financing would further compound these effects, making lithium fusion fuels more akin to an upfront capital expenditure than operational expenditure. Other potential barriers to fusion deployment created by lithium are also discussed: enrichment technologies of today are shown to be too expensive, not scalable, and environmentally risky, and highly enriched 6 Li is a controlled substance. Mitigating actions include: developing alternative enrichment technologies that are affordable, scalable, and do not rely on mercury; incorporating lithium enrichment as an explicit cost driver in reactor design processes, producing more compact reactors with smaller lithium inventories; establishing distinct enrichment levels to enable supply chain monitoring for misuse; and the most radical solution: breeding blankets that use natural, unenriched lithium. These actions may impact tritium breeding capabilities, which calls for an urgent re-assessment of the tritium breeding paradigm. Whatever solution is sought, lithium supply is a mission-critical issue that needs urgently addressing. 1 Context & scale The commercial deployment of fusion energy relies on the availability and enrichment of 6 Li for tritium breeding, essential for fuelling fusion reactions. With a new fusion industry emerging and demonstrators aiming to operate in the next decade, 6 Li availability poses a significant bottleneck. Historical mercury-based enrichment methods are unsustainable and may not scale. There is an urgent need for innovative, scalable, and environmentally safe lithium enrichment technologies, but cost, as well as geopolitical and non-proliferation implications, demand careful consideration. A collaborative, multidisciplinary approach is essential. We examine alternative pathways utilising natural or lower-enriched lithium, advocating for a broader reassessment of breeding blanket design philosophy. 6 Li is an under-explored but key challenge in achieving the global deployment of fusion, a technology with significant potential for providing sustainable energy for humankind. 2 Introduction A fusion industry requires materials for the construction and operation of power plants. Whether these materials become limiting factors has been addressed in the literature (e.g. [ 25 ] [ 27 ] [ 23 ] ). So far, relatively few materials are identified as critical. Lithium is one of them. Lithium is effectively one of the primary fuels of the fusion reactor; In the internal fuel cycle, neutrons released by fusion events react with lithium to produce tritium, which is then separated to feed the deuterium-tritium fusion reaction. For this cycle to perpetuate, at least one triton must be bred per fusion neutron released - a tritium breeding ratio (TBR) of unity. In reality, the TBR must be greater (by some 20%) to account for tritons and neutrons lost during this process. Lithium is naturally composed of the stable isotopes 6 Li and 7 Li in ratios of approximately 7.5 % and 92.5%, respectively. The neutron capture reaction with 6 Li is exothermic, releasing 4.8 MeV (up to tens of percent of reactor power output), and has a cross-section for thermal neutrons of \sim 1000 barn at room temperature. The reaction with 7 Li has a threshold energy of 2.5 MeV and reaches the much smaller cross-section of \sim 0.3 barn in the relevant energy range 5 – 14 MeV, but has the advantage of producing a secondary neutron in addition to a tritium. Both isotopes are therefore useful in the tritium breeding blanket. However, as neutrons slow during their passage through the breeding zone, the largest contribution to the tritium production comes from the 6 Li isotope. Thus to maximise TBR, blankets are often predicted to require 6 Li enrichment levels of 60-90\% (or potentially as low as 30% for solid-based breeders with neutron multipliers). In this paper we broaden the current discussion of lithium availability. In the economic analysis, we compare the cost of capital and lithium enrichment to consumption. We also examine lithium in a wider context to discuss its impact on the fusion value proposition. With energy independence often regarded as a key asset, fusion energy must not depend on monopolised materials, and estimates of lithium availability must account for an increasingly varied geopolitical domain. Likewise, supply chains must be considered wholly when assessing fusion energy’s credentials as a clean and safe source of power – this includes environmental and climate impacts of lithium mining and processing. This also applies to scalability: if the processing of lithium requires scarce substances, then lithium itself must be considered scarce even if its unprocessed reserves are large. In all of these considerations we distinguish the short term (is there enough to build a few DEMO reactors?) from large scale deployment, which calls for more than a hundred fusion power plants constructed per year. We base our analysis on literature, especially the recent overview papers on the enrichment of lithium [ 13 ] [ 1 ] [ 2 ] [ 22 ] [ 35 ] [ 34 ] [ 37 ] . The consumption of lithium, at about 100 kg per year for a 1 GWth (effective) power plant, is small. Terrestrial reserves of lithium are not considered a limiting factor for the foreseeable future, nor would lithium consumption incur significant costs. The lithium consumption of a 1 GWth fusion power plant that generates electricity corresponds to roughly 2.10^{7} kWh per kg of lithium (assuming a \sim 20\% overall plant efficiency [ 21 ] ). At a cost of electricity (CoE) of $0.1/kWh, the generated revenue is \sim $2M per kg of lithium. Hence, fusion could pay $200k/kg and the variable cost of fuel would still be a 10% contribution to the CoE. With the present market price of purified metallic lithium, hundreds of $/kg, with the cost of the lithium component roughly five times larger, the cost of lithium would appear to be insignificant. This estimation neglects the fact that the financing of the required reactor inventory of lithium will cost two orders of magnitude more than the consumption. The allowable cost of purified lithium would therefore be of the order $1-10k/kg – at most two orders of magnitude above present market price. This raises the question of future lithium price volatility given the potentially stable costs for enrichment and purification. It has been suggested [ 4 ] that lithium consumption by the battery industry could leave none remaining for fusion. Certainly, demand for lithium is expected to strongly increase in the coming decades, to more than a million tonnes per year by 2040. However, it is unlikely that increased demand drives lithium prices too high for fusion. Consider the acceptable price of a car: the cost of (natural) lithium cannot rise above

Read the complete text