Quasi-Static Control of Discrete Cosserat Rod

Srishti Siddharth, Domenico Campolo, Ravi Banavar · 2026

Read Quasi-Static Control of Discrete Cosserat Rod by Srishti Siddharth, Domenico Campolo, Ravi Banavar (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-01395.txt.

Introduction

Srishti Siddharth, Domenico Campolo, and Ravi Banavar design controllers for soft robots, whose bending bodies are hard to steer with rigid-robot methods. They model the robot as a Cosserat rod, then cut it into segments of constant strain so the smooth model becomes a finite set of equations much like a rigid arm.

Control comes from outside forces and torques, shaped by feedback rules built in both strain space and task space. The rules are tuned so the robot's tip can follow a target path and the body can hold a target shape in slow, steady motion. A wide set of simulations checks both jobs. The work gives soft robotics a model-based control route that borrows the clarity of classic manipulator theory.

Catalog record

CREATORSrishti Siddharth, Domenico Campolo, Ravi Banavar
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.01395

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quasi-Static Control of Discrete Cosserat Rod Thanks: Srishti Siddharth, Domenico Campolo, Ravi Banavar Abstract In this paper, we design feedback control laws for soft robots modelled using the Cosserat rod, which is spatially discretised using the Piecewise Constant Strain (PCS) approach. The PCS approach transforms the nonlinear PDEs describing the Cosserat rod to a system of nonlinear ODEs. This simplification results in a model describing soft robots which is similar to the serial rigid-link manipulators. We design feedback control laws for the quasi-static PCS model by using external wrenches as control inputs. The control laws are designed based on state-feedback linearisation in strain and task spaces. An extensive set of numerical results demonstrates the performance of the control laws for end-effector trajectory tracking and shape control of soft robots. I Introduction In many engineering and scientific applications, geometrically exact rods are used to obtain accurate models for highly deformable slender rods. Such flexible structures find applications in continuum robots [ 7 , 4 ] , DNA strands experiencing various mechanical forces [ 6 ] and flexible microrobots for endovascular surgery [ 2 ] . The geometrically exact rod [ 1 ] or the Cosserat rod provides a mathematically elegant and high-fidelity model for such slender rods undergoing large deformations, unlike Euler-Bernoulli and Timoshenko beam theories, which account for small deformations. The variational formulation of the geometrically exact rod and its numerical aspects were presented in the extensive work of Simo et al. given in [ 19 ] and [ 20 ] . The book by Antman [ 1 ] presents the theory of planar and spatial geometrically exact rods. The modern treatment of geometrically exact rods is directed towards algorithm design and implementation based on the special Cosserat rod theory, which describes the motion of the rod using the positions of material points lying on its centerline and the orientations of rigid cross-sections attached at each material point. The soft robotics community has proposed various numerical models based on the Cosserat rod theory. The Piecewise Constant Curvature (PCC) model [ 5 , 8 ] assumes that a continuum robot can be represented by a series of connected circular arcs, which is not valid in the case of out-of-plane external loads. The Piecewise Constant Strain (PCS) model introduced by Renda et al. [ 17 , 18 , 16 ] , assumes that a soft robot consists of multiple sections, each with constant linear and angular strains. The resulting geometric structure of the model is similar to the traditional rigid-link manipulators, thus unifying the theory of rigid-link and soft robots [ 12 , 14 ] . This allows us to extend the control design theory developed for rigid-link manipulators to soft robots. Other strain based models include the Geometric Variable Strain (GVS) model [ 3 ] and the Piecewise Linear Strain (PLS) model [ 11 ] , which include discrete statics and dynamics models of the Cosserat rod based on strain basis functions. Several model-based controllers have been proposed for soft robots, which are inherently underactuated. Lyapunov function-based control laws have been developed in [ 9 ] and [ 13 ] for dynamics of soft robots. An inverse kinematics-based controller for the GVS model has been developed in [ 15 ] . Finally, a robust control law for the PLS static model has been proposed in [ 10 ] . For the sake of conciseness, we do not provide an extensive literature survey on control of soft robots. In this paper, we will focus on design of control laws for the quasi-static PCS model. Thus, the end-effector trajectory tracking and shape control tasks will be achieved by considering slow motion of the robot to satisfy the conditions for quasi-static operation. Contributions: The contribution of the paper is to primarily develop the model-based control theory of soft robots. This is in contrast to the modern development of soft robots which focuses on learning-based control strategies. We formulate the inverse kinematics for soft robots, which provides various strains for a given end-effector pose of the robot. We then derive simple and effective control schemes based on state-feedback linearisation in strain and task spaces, while remaining within the framework of the Cosserat rod theory. We present three numerical experiments to validate the control approaches. Outline: In Section II , we present a brief review of the statics of the Cosserat rod. In Section III , we recall the theory of the PCS static model. In Section IV , we propose the inverse kinematics algorithm, followed by the design of feedback control laws in Section V . In Section VI , we present and discuss three numerical experiments to validate our control design approaches. Section VII includes concluding remarks and future work. II Statics of the Cosserat rod II-A Kinematics of the Rod The Cosserat rod theory accounts for stretching, shearing, bending and twisting strains of a rod. Let {L} be the length of the undeformed rod and let {S}\in[0,{L}] be the arc-length parameter which is used to identify the material points on the centerline of the rod. The configuration of the rod is described with respect to an inertial frame \{e_{1},e_{2},e_{3}\} , where e_{1},e_{2},e_{3} are the standard unit vectors in {\mathbb{R}}^{3} . The undeformed or reference configuration of the rod is assumed to be the one in which the rod is lying in a straight configuration along the e_{1} axis. The configuration of the rod at any time instant is completely described by the position of each material point lying on the centerline, denoted by {x}({S},t)\in{\mathbb{R}}^{3} and the orientation of the cross-section attached to each point, denoted by {R}({S},t)\in{\mathrm{SO(3)}} . Thus, the configuration of the rod at a time instant t , defined by the map {g}:[0,{L}]\to SE(3) , is given as {g}({S},t)=\begin{bmatrix}{R}({S},t)&{x}({S},t)\\ 0^{T}&1\end{bmatrix} (1) for all {S}\in[0,{L}] . In addition to the configuration described in ( 1 ), the kinematics of the rod is described by its strains and velocities. The velocity twist, expressed in the body-fixed frame (or the material frame) of the rod is given by \widehat{{\eta}}({S},t)={g}^{-1}({S},t)\frac{\partial{g}}{\partial t}({S},t)={g}^{-1}({S},t)\dot{{g}}({S},t), (2) where {\eta}({S},t)=\begin{bmatrix}{\omega}^{T}({S},t)&{\gamma}^{T}({S},t)\end{bmatrix}^{T}\in{\mathbb{R}}^{6}, (3) \widehat{(\cdot)}:{\mathbb{R}}^{6}\to{\mathfrak{se}(3)} is the hat map, {\gamma}({S},t)\in{\mathbb{R}}^{3} and {\omega}({S},t)\in{\mathbb{R}}^{3} are the linear and angular velocities, respectively. Similarly, the strain twist, expressed in the material frame, is given by \widehat{{\xi}}({S},t)={g}^{-1}({S},t)\frac{\partial{g}}{\partial{S}}({S},t)={g}^{-1}({S},t){g}^{\prime}({S},t), (4) where {\xi}({S},t)=\begin{bmatrix}{\kappa}^{T}({S},t)&{V}^{T}({S},t)\end{bmatrix}^{T}\in{\mathbb{R}}^{6}, (5) {V}({S},t)\in{\mathbb{R}}^{3} and {\kappa}({S},t)\in{\mathbb{R}}^{3} are the linear and angular strains, respectively. The first component of {V}({S},t) represents the stretching strain along e_{1} , and the remaining components represent the shearing strains along e_{2} and e_{3} axes, respectively. Similarly, the first component of {\kappa}({S},t) represents the twisting strain about the e_{1} axis, and the remaining components represent bending strains about e_{2} and e_{3} axes, respectively. Fig. 1 : Deformation of the three-dimensional Cosserat rod discretised by the PCS approach. Remark 1 For the sake of concise notation, the space and time dependence of the quantities described in ( 1 ) - ( 5 ) will be sometimes ignored. The relationship between the velocity in ( 3 ) and the strain in ( 5 ) is given by {\eta}^{\prime}=\dot{{\xi}}-{\text{ad}}_{{\xi}}{\eta} (6) due to the equality of the mixed partial derivatives, i.e., (\dot{{g}})^{\prime}=\dot{({g}^{\prime})} . Here, {\text{ad}}_{{\xi}} is the adjoint map for the strain twist vector described in [ 16 ] . II-B Statics

Read the complete text