Low-cost Ultra-low Noise DAC System-on-Module for Scalable Ion-Trap Electrode Control

1 st Mitchell G. Peaks, 2 nd Mia M. Kaarls, 3 rd Crystal Noel · 2026

Read Low-cost Ultra-low Noise DAC System-on-Module for Scalable Ion-Trap Electrode Control by 1 st Mitchell G. Peaks, 2 nd Mia M. Kaarls, 3 rd Crystal Noel (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-01132.txt.

Introduction

Mitchell G. Peaks, Mia M. Kaarls, and Crystal Noel present an open-hardware digital-to-analog converter module for low-noise control of ion-trap electrodes. Scalable ion-trap experiments and quantum computing need many DC electrode channels with low noise, sufficient bandwidth, and flexible control, at manageable cost. Design specifications target a modular, scalable platform, with explicit attention to supply-chain management and cost effectiveness for scaling.

The system pairs a Texas Instruments multi-channel converter chip with a Spartan-7 FPGA for signal generation and compute. Characterization of a prototype suggests the design suits a variety of ion-trap physics experiments and quantum computing applications. Readers get a complete module design intended to be reproduced and scaled by other laboratories.

Catalog record

CREATOR1 st Mitchell G. Peaks, 2 nd Mia M. Kaarls, 3 rd Crystal Noel
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.01132

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Low-cost Ultra-low Noise DAC System-on-Module for Scalable Ion-Trap Electrode Control Thanks: This material is based upon work supported by the U.S. Department of Energy, Office of Science, National Quantum Information Science Research Centers, Quantum Systems Accelerator (Award No. DE-SCL0000121). Additional support is acknowledged from the National Science Foundation: Software-Tailored Architecture for Quantum Co-Design (STAQ) Award (PHY-2325080) and QLCI: Center for Robust Quantum Simulation (OMA-2120757). 1 st Mitchell G. Peaks, 2 nd Mia M. Kaarls, 3 rd Crystal Noel Abstract A new design for an open-hardware Digital-to-Analog Converter System-on-Module is presented for low-noise ion-trap electrode control. The design specifications were established to fill the technical needs of a modular, scalable DC electrode control platform with sufficient bandwidth, noise characteristics and control flexibility. Critically, a priority was placed on supply-chain management considerations and cost effectiveness for scaling. The system is based upon the Texas Instruments DAC81416 and AMD Xilinx Spartan-7 FPGA for the analog signal and compute architecture respectively. Performance characterization of a prototype device suggests the design is suitable for a variety of ion-trap physics experiments and quantum computing applications. I Introduction Trapped ions are now a widely adopted platform for the study of quantum phenomena, as well as for development of quantum computers, simulators and sensors. Ion trap systems require a set of controllable DC electrodes to generate a static confining field in one principal trapping axis, for adjustment and trimming of the trapping potential, and to facilitate ion-transport operations [ 27 , 12 , 9 ] . Increasing sophistication in the devices and architectural specifications have necessitated development of appropriate control electronics for these DC electrodes, not only in channel density, but also in noise characteristics and update bandwidth. While there is often not a one-size-fit-all solution for DC electrode control, there are typically key features which are mutually desirable. When considering digital-to-analog converter (DAC) Integrated Circuits (ICs), the specification trade-offs most relevant in this application are the update bandwidth, output noise, settling time, resolution, and output voltage range. Power consumption is generally not a strong consideration due to the laboratory conditions not requiring portability or compact form-factors. An important set of factors not as typically discussed in smaller scale device production are supply chain issues, component sourcing, and cost effectiveness at scale. This type of analysis and engineering trade-off, while common in consumer markets and prototype electronics for production at scale, is rarely considered in experimental physics applications where many devices are one-offs or low production volume. A notable exception to this may be “big science” experiments such as those found at national or joint national facilities, for example in particle detectors or very large astronomical instruments [ 1 , 2 , 20 ] . These factors are becoming far more relevant as quantum technologies scale. Dependence on specific products when assembling an experimental asset and then continuing to expand functionality can be difficult when component obsolescence or specific private entity development products are employed and are then no-longer supported. Given the lifespan of many of these experimental assets, and their continued evolution and expansion, this can be a serious problem often requiring extensive redesign. Over-reliance on legacy equipment can also hinder continued progress on broader scientific objectives. For this reason, a strong focus in developing the instrumentation discussed herein is on providing an adaptable, expansible core, with an open-source hardware framework. We prioritize availability of components, open-source development tools, and a core architecture which can be built, expanded and adapted by the end-user from Original Equipment Manufacturer (OEM) components. Among the current, most widely used DAC systems for ion-trap electrode control are the ARTIQ/Sinara products from M-Labs [ 5 ] . For ion trap applications, the Zotino card is the standard choice, and employs the Analog Devices AD5372, 32-channel, 16-bit DAC quoting 210 nV/ \sqrt{\text{Hz}} at 50 kHz [ 13 ] . For higher speed applications, the Fastino board is a higher-speed version of the Zotino based on the Analog Devices AD5542 ( 60 nV/ \sqrt{\text{Hz}} at 500 kHz over a 1 kHz bandwidth) [ 14 ] . The Fastino has channels that can be pushed to update at 2 Msps simultaneously when using gateware acceleration [ 15 ] . Other developments in this field include attempts to increase the output channel voltage to accommodate faster and more robust shuttling operations in Quantum Charge-Coupled Device (QCCD) architectures for which the M-Labs ARTIQ/Sinara stack includes additional amplifier hardware expansions [ 16 ] . While these commercial options are appropriate for many experiments, there are several key limitations addressed by the design presented here. First, the cost is prohibitive when considering an ion trap with one hundred or more electrodes (such as the standard Sandia National Laboratory Phoenix design [ 22 ] ). It is likely that the number of necessary DC electrode controls will only increase in future designs potentially greatly increasing the cost for a single system [ 23 ] . Additionally, with a commercial product, the design is fixed and does not accommodate custom features. The hardware also has its own required ecosystem for integration. Finally, the Vanguard DAC aims for lower noise specifications than those provided by existing commercial options. There are several examples of small-scale DAC development for laboratory environments. A noteworthy non-commercial example is the DAC system presented in reference [ 21 ] . In this example, a hybrid approach has been taken with a development/evaluation board employed for the compute and control module portion (AMD Xilinx ZCU106) and a custom DAC “Front-end” built to provide high analog voltages to the trap. This hybrid approach is convenient for proof-of-principle experiments in academic laboratories and is not uncommon [ 17 ] . At the Duke Quantum Center (DQC), a custom DAC solution has previously been favored for electrode control, owing to the high channel density, synchronicity, and real-time control requirements. This system is based on a carrier board which provides twenty-five Quad High-Accuracy DACs (Texas Instruments TI DAC8734), on a single board with a socket to connect an XEM6010 evaluation board produced and discontinued by Opal Kelly based on the Spartan-6 FPGA. Another example of a hybrid control approach, this system requires the use of external proprietary software to program and control, and an obsolete third-party product to function, making integration, development and future support challenging. Attempts to solve channel density issues for scaling ion-trap systems have also been explored by employing in-vacuum DAC systems which can be externally configured, reducing the vacuum feed-through load and hardware constraints [ 24 ] . For fast ion-transport operations on state-of-the-art micro-fabricated ion-traps, developments using RF hardware are being explored, such as the AMD Xilinx Zynq Ultrascale+ RF System-on-Chip, to provide the DC electrode voltages to \approx 100 electrodes with high update bandwidth [ 10 ] . The Vanguard DAC departs from these examples by eliminating the reliance on a third-party evaluation board. In the following, the Vanguard DAC System-on-Module (SoM) prototype is presented. Section II begins with the requirement specification written for the device and the myriad design decisions. Section III outlines the Hardware and PCB design settled upon for realizing the specifications. In Section IV , the FPGA digital design developed for testing and minimum viable operation are discussed. Characterization and measurements of the system

Read the complete text