Mixing and spreading of gravity currents in heterogeneous porous media Journal: Advances in Water Resources
Albert Jiménez-Ramos, Juan J. Hidalgo · 2026
Read Mixing and spreading of gravity currents in heterogeneous porous media Journal: Advances in Water Resources by Albert Jiménez-Ramos, Juan J. Hidalgo (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-27827.txt.
Introduction
Jiménez-Ramos and Hidalgo study how a gravity current mixes, migrates, and spreads in varied porous media. Mixed rock, shown by log-normal rock fields of varying link lengths, cuts loss and speeds the current with the Rayleigh number. In the unstable case, mixing accelerates convection onset. Convection-driven loss slows the gravity current and counteracts mixing's dispersive effect, yielding a narrower interface and higher loss. Uneven rock cuts loss through the barrier effect of low rock regions, though even cases win at small Rayleigh numbers.
Catalog record
| CREATOR | Albert Jiménez-Ramos, Juan J. Hidalgo |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 49006 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.27827
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mixing and spreading of gravity currents in heterogeneous porous media Journal: Advances in Water Resources Albert Jiménez-Ramos, Juan J. Hidalgo Abstract We analyze the mixing, migration and spreading of a gravity current in a heterogeneous porous medium using high-fidelity numerical simulations. Heterogeneity is represented by log-normal permeability fields of varying correlation lengths and variance. Stable and unstable density stratification scenarios are considered through linear and non-monotonic density laws, respectively. Heterogeneity reduces dissolution and increases the speed of the gravity current proportionally to the Rayleigh number. In the unstable case, heterogeneity accelerates the onset of convection. Convection-driven dissolution slows down the gravity current and counteracts the dispersive effect of heterogeneity resulting in a narrower interface and higher dissolution than in the stable case. Permeability anisotropy reduces dissolution because of the barrier effect of low permeability regions, except when blobs of buoyant fluid are trapped in low permeability structures and rapidly dissolve. The variance of the log-permeability field enhances dissolution. However, the homogeneous case outperforms heterogeneous cases except when Rayleigh number is small. This suggest an interaction between the size of the instabilities, the correlation length of the permeability field and the dispersive and barrier effects of the permeability field that controls dissolution efficiency. † † highlights: Dispersive effect of heterogeneity is counteracted by the fingering instability Anisotropy reduces dissolution due to barrier effect except for trapped blobs Dissolution enhanced only for high variance permeability fields 1 Introduction Gravity currents form when flow is driven by the density differences between fluids. Sea water intrusion in which the dense salt water encroaches on the fresh water that discharges into the sea ( 9 ) , aquifer remediation of DNAPLs using dense brines ( 27 ) , or \mathrm{CO_{2}} injection in saline aquifers, in which the supercritical \mathrm{CO_{2}} migrates over the resident brine ( 2 ) , are examples of the formation of gravity currents in porous media. The speed and shape of inmiscible gravity currents in homogeneous media is determined by the density and viscosity contrast between fluids and aquifer permeability ( 18 ; 12 ) . However, the assumptions of inmiscibility and homogeneity can be too strict for some natural scenarios. Mixing and dissolution of the fluids changes the amount of migrating fluid, reducing the size and extension of the gravity current ( 25 ; 35 ) . This is specially important when the density stratification is unstable, as in \mathrm{CO_{2}} injection, and the formation of fingering instabilities enhances fluid dissolution, which can eventually arrest the gravity current ( 15 ; 24 ; 10 ) . The effect of permeability heterogeneity on gravity currents also changes their shape and spread. In layered media, gravity currents tend to focus on high permeability layers ( 23 ; 17 ) , increasing its speed ( 4 ) , and the migration of the current depends on the cross-bedded structure of the formation ( 37 ) . In media with vertical permeability gradients, gravity can have a rarefaction wave or shock-like structure ( 16 ) . In general vertical and horizontal permeability gradients alter the gravity current’s spread, average height and steepness ( 8 ) , while homogeneous anisotropic permeability can delay the formation of the current ( 5 ) . We focus here in the combined effect of heterogeneity and dissolution. Heterogeneity influences how fluids mix by widening the size of the mixing zone between the fluids ( 1 ; 29 ) and favoring dispersion ( 22 ; 11 ) . Therefore, altering the migration and shape of the gravity current. The further effect of heterogeneity on convective instabilities ( 31 ; 14 ; 26 ; 7 ; 6 ) can greatly modify the migration and evolution of the gravity current. The goal of this work is to analyze the impact of the porous medium heterogeneity on the migration and dissolution of a gravity current. We analyze the shape of the fluid interface, and the evolution of dissolution fluxes by means of high-resolution numerical simulations. We consider two scenarios. A stable gravity current in which density changes linearly with concentration and an unstable gravity current in which a non-monotonic density stratification triggers fingering instabilities. The work is organized as follows. Sect. 2 presents the governing equations Sect. 3 describes the numerical setup and defines the metrics to quantify mixing and spreading. In Sect. 4 , we report and discuss the obtained results. Finally, some concluding remarks are provided in Sect. 5 . 2 Governing equations We consider a two-dimensional rectangular aquifer \Omega in the x - z plane, with dimensions \Omega=\left[0,A\right]\times\left[0,1\right] . In the following, we describe the governing equations in dimensionless form and refer to A for the adimensionalization procedure ( 32 ) . We consider two perfectly miscible fluids and neglect capillarity effects so that fluid mass conservation, under the incompressibility assumption and in the absence of sources or sinks, reads \nabla\cdot\bm{q}=0, (1) where \bm{q}=-\bm{k}\left(\nabla p+\rho\bm{e}_{z}\right) (2) is the Darcy velocity, \bm{k}\equiv k\left(\bm{x}\right)\bm{I} is the permeability tensor, assumed isotropic, where k\left(\bm{x}\right) is a scalar function and \bm{I} is the identity tensor, p\equiv p\left(\bm{x},t\right) is the pressure, \bm{e}_{z} is a unit vector parallel to gravity and pointing in the opposite direction and \rho is the fluid density, which is a function of concentration. Concentration c is described in a Eulerian framework by the advection-diffusion equation \frac{\partial c}{\partial t}=-\bm{q}\cdot\nabla c+\frac{1}{\text{Ra}}\nabla^{2}c, (3) where the Rayleigh number Ra is defined as \text{Ra}=\frac{k_{g}\Delta\rho gL_{z}}{\phi D\mu}, (4) with k_{g} the geometric mean of the permeability field, \Delta\rho a characteristic density difference, g the gravity constant, L_{z} the vertical extension of the domain, \phi the porosity, \mu the fluid viscosity, considered constant, and D the diffusion-dispersion coefficient. Regarding boundary conditions, pressure is prescribed along the right boundary and the other boundaries are taken to be impervious, \begin{split}p=0&\text{ at }x=A,\\ \bm{q}\cdot\bm{n}=0&\text{ at }\partial\Omega\setminus\{x=A\},\\ \nabla c\cdot\bm{n}=0&\text{ at }\partial\Omega,\\ \end{split} where \bm{n} denotes the outward normal vector in \partial\Omega . Initially the region x\leq\frac{A}{5} is filled with the buoyant fluid ( c=1 ) at rest, that is, \displaystyle\bm{q}\left(\bm{x},0\right) \displaystyle=\bm{0} \displaystyle\text{in }\Omega, (5a) \displaystyle p\left(\bm{x},0\right) \displaystyle=0 \displaystyle\text{in }\Omega, (5b) \displaystyle c\left(\bm{x},0\right) \displaystyle=\frac{1}{2}\left(1-\tanh\left(100\left(x-\frac{A}{5}\right)\right)\right) \displaystyle\text{in }\Omega, (5c) where \tanh(x) is used to smooth the initial interface. 2.1 Constitutive laws We consider two different constitutive laws for the fluid density. First, a stable case with a linear density law \rho\left(c\right)=-c to represent a stable fluid stratification, similar to the behavior of salt water and fresh water. Second, an unstable case in which we use a density law aiming to capture relevant aspects of \mathrm{CO_{2}} -brine systems. That is, a density law with a density contrast that favors the fluids stratification and drives the migration of the gravity current, and with an intermediate density maximum that triggers fingering instabilities and drives convective dissolution. We use a dimensionless density law based on a analogue fluid system formed by propylene glycol and water ( 3 ; 15 ) \rho\left(c\right)=6.19c^{3}-17.86c^{2}+8.07c. (6) Figure 1 : Graph of the constitutive density law \rho\left(c\right) in Eq. (6) with a neutral concentration at c_{n}=0.56 . When c>c_{n} , the fluid tends to float, while when c<c_{n} , the fluid tends to sink. This density law (see Fig. 1 ) is a non-monotonic function of the concentration with an intermediate maximum at c_{m}=0.26 . There exist