Critical temperatures and critical currents of wide and narrow quasi-one-dimensional superconducting aluminum structures in zero magnetic field Journal: Physica C

V. I. Kuznetsov, O. V. Trofimov · 2026

Read Critical temperatures and critical currents of wide and narrow quasi-one-dimensional superconducting aluminum structures in zero magnetic field Journal: Physica C by V. I. Kuznetsov, O. V. Trofimov (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-27822.txt.

Introduction

Kuznetsov and Trofimov measure key heat points plus switching and retrapping currents for wide and narrow aluminum films in zero field. They find that thinner structures have lower key heat points and current levels. Flaws on dirty edges likely hit thinner structures harder. In most cases, the switching current in both structures follows two curves. Below the resistive change's bottom it follows Kupriyanov-Lukichev theory. Near the change's top it is straight with heat and matches the Josephson current.

Catalog record

CREATORV. I. Kuznetsov, O. V. Trofimov
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40641
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.27822

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Critical temperatures and critical currents of wide and narrow quasi-one-dimensional superconducting aluminum structures in zero magnetic field Journal: Physica C V. I. Kuznetsov, O. V. Trofimov Abstract We measured the critical temperatures and critical switching and retrapping currents of wide and narrow thin-film quasi-one-dimensional superconducting aluminum structures of the same thickness in zero magnetic field. For the first time, we found that the narrower the structure, the lower the critical temperature and critical current density in the structure. Probably, the influence of depairing centers that are on dirty longitudinal boundaries of the structure, is the stronger than the narrower the structure. It is found for the first time that, in most cases, the temperature-dependent switching critical current in both structures is approximated by two functions. At temperatures below the temperature corresponding to the bottom of the resistive N-S transition of structures, the switching critical current is described by the Kupriyanov-Lukichev theory. At temperatures close to the top of the N-S transition, the switching current is linear with temperature and coincides with the critical Josephson current. At these temperatures, Josephson SNS junctions are formed in structures. 1 Introduction Superconducting critical current is the most important characteristic of superconducting and hybrid devices. The critical current of superconducting quasi-one-dimensional (i.e., having transverse dimensions less than twice the superconducting temperature-dependent coherence length 2\xi(T) ) of wires and various structures with weak link has been widely studied [ 1 , 2 , 3 , 4 ] . In nanodevices, the critical current can have specific features due to thermally activated and quantum fluctuations of the superconducting order parameter, nonlocal and other effects. "Nonlocality" is the mutual influence of electronic transport in different parts of the structure. In superconducting structures, nonlocal effects appear at a shorter length, close to the coherence length \xi(T) and at a larger length, close to the relaxation length of the quasiparticle charge imbalance \lambda_{Q}(T,B) , which depends on temperature and magnetic field [ 5 ] . It is surprising that the critical current and nonlocal (equilibrium and nonequilibrium) phenomena in a long quasi-one-dimensional wire with a total length several times greater than twice the length of the quasiparticle imbalance 2\lambda_{Q}(T,B) and having a transverse narrowing with a length in the range from \xi(T) to \lambda_{Q}(T,B) are practically not studied. Also, the critical current and nonlocal effects in a long quasi-one-dimensional wire, consisting of wire segments of different widths, have not been studied. It should be expected that the critical current as a function of temperature and magnetic field, measured on a short section of the wire, will depend on the values of the superconducting order parameter in other parts of the current-carrying wire of variable width and in potential quasi-one-dimensional wires. Quasi-one-dimensional aluminum wires are part of many superconducting nanodevices. It has long been known [ 6 , 7 ] that the thinner the aluminum film, the higher the critical temperature of this film. It is also considered an established fact that the smaller the diameter quasi-one-dimensional superconducting aluminum wire, the higher the critical temperature of the wire. It should be expected that the narrower the quasi-one-dimensional thin-film aluminum wire, the higher the critical temperature. Analyzing new effects in superconducting quasi-one-dimensional aluminum wires of different widths and structures consisting of such wires [ 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 ] , we assumed that another statement is valid for the structures of these works, namely, that the smaller the wire width, the lower the critical temperature of the wire. This assumption that the narrow parts of the structure have a critical temperature lower than the critical temperature of a wide part of the structure is a necessary condition for the appearance of negative nonlocal and local voltages (resistances) in a superconducting quasi-one-dimensional dc-biased aluminum structure at temperatures close to the critical temperature [ 9 ] . We believe that the assumption of different critical temperatures of the wide and narrow parts of the circularly-asymmetric aluminum ring will help to remove the long-term intractable challenge, which consists in the unexplained mysterious phase shift in the magnetic field of critical currents of opposite polarities in circularly-asymmetric aluminum structures permeated with a magnetic flux [ 11 , 12 ] . This phase shift of the critical currents is the reason for the appearance of a rectified time-averaged direct voltage V_{rec}(\Phi/\Phi_{0}) , oscillating with a period equal to the superconducting quantum of the magnetic flux \Phi_{0} , in a circularly-asymmetric superconducting aluminum ring (a structure of such rings in a series), permeated with the flux \Phi , when an alternating current (with a zero dc component) with an amplitude close to the critical current is passed through this ring (structure) at temperatures slightly below the critical temperature T_{c} [ 10 , 11 , 12 , 13 , 14 ] . The circular asymmetry of a ring with a constant inner radius r_{i} is due to the fact that the ratio of the widths of the wide and narrow semirings was usually w_{w}/w_{n}=2 . Such a ring can be used in an asymmetric dc micro-SQUID [ 1 , 16 ] . Moreover, such a ring and a structure of such rings in series can operate as a highly efficient magnetic field-dependent ac voltage rectifier and as a highly sensitive detector of nonequilibrium electromagnetic noise [ 10 , 11 , 12 , 13 , 14 ] . The voltage V_{rec}(\Phi/\Phi_{0}) appears due to the difference in critical currents for positive and negative alternating current half-waves. It was found [ 11 , 12 ] that the critical currents of opposite polarities I_{c+}(\Phi/\Phi_{0}+\phi_{l}) and I_{c-}(\Phi/\Phi_{0}-\phi_{l}) differ not in amplitude, but in phase shift relative to the zero of the flux in different directions by the phase difference \phi_{l}=d\Phi/\Phi_{0} . The mutual shift of these critical currents relative to each other 2\phi_{l} can reach 0.5. Any significant mutual phase shift relative to each other of critical currents of opposite polarities cannot be obtained from the known geometric and physical parameters of circularly-asymmetric aluminum structures [ 10 , 11 , 12 , 13 , 14 ] . The reason for the appearance of this phase shift has not yet been found. We proposed a model for the appearance of this shift, considering a circularly-asymmetric ring as an asymmetric quantum superconducting interferometer [ 1 , 16 ] . In this model, which will be presented elsewhere, the additional phase shift of the critical currents will be nonzero only if the critical current densities j_{c1}(T) and j_{c2}(T) are not the same in the wide and narrow arms of the interferometer. For a given geometry of circularly-asymmetric rings, this is possible only in a situation where the critical temperatures of the wide and narrow arms of the interferometer T_{cw} and T_{cn} , respectively, differ. In this work, in order to confirm the assumption about the difference between T_{cw} and T_{cn} , and, consequently, the difference between j_{c1}(T) and j_{c2}(T) of the wide and narrow arms of the interferometer, we fabricated wide and narrow superconducting quasi-one-dimensional aluminum structures with dimensions close to the typical dimensions of a wide and narrow aluminum semirings. We measured the critical temperatures and plotted critical currents as functions of T in

Read the complete text