Asymmetric freezing of a sliding droplet on an inclined surface

Sivanandan Kavuri, 1 George Karapetsas, 2 Chander Shekhar Sharma 3, Kirti Chandra Sahu 1 · 2026

Read Asymmetric freezing of a sliding droplet on an inclined surface by Sivanandan Kavuri, 1 George Karapetsas, 2 Chander Shekhar Sharma 3, Kirti Chandra Sahu 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-27388.txt.

Introduction

Kavuri and three colleagues simulate a droplet sliding down an inclined cold surface as it freezes, using the lubrication approximation. Sliding before and during early freezing dominates the frozen shape, and a slanted ice point grows at the droplet tip where gravity fights capillary resistance. Greater inclination and stronger wetting increase asymmetry, while highly wetting surfaces can even pull liquid briefly uphill against gravity. Quicker freezing, tracked by a higher Stefan number, curbs slide-driven warping and narrows both the tip angle and the frozen contact-angle gap.

Catalog record

CREATORSivanandan Kavuri, 1 George Karapetsas, 2 Chander Shekhar Sharma 3, Kirti Chandra Sahu 1
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE92659
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.27388

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Asymmetric freezing of a sliding droplet on an inclined surface Sivanandan Kavuri, 1 George Karapetsas, 2 Chander Shekhar Sharma 3, Kirti Chandra Sahu 1 Abstract We investigate the asymmetric freezing of a liquid droplet sliding on an inclined cold surface using numerical simulations based on the lubrication approximation. The combined effects of gravity, capillarity, and solidification kinetics on droplet motion, interfacial deformation, and the resulting frozen morphology are examined through systematic variations in substrate inclination, wettability, effective Bond number, and Stefan number. Our results show that sliding prior to and during the early stages of freezing plays a dominant role in governing the asymmetry of the frozen droplet. A tilted ice cusp forms at the droplet tip due to the competition between gravitational forces and capillary resistance, with its orientation and magnitude strongly dependent on substrate wettability and inclination. Greater inclination and increased wettability enhance asymmetry in droplet morphology. Further, highly wetting substrates favor capillary-driven retraction and induce transient liquid motion opposite to gravity during freezing. The evolution of contact-angle hysteresis at both the solid surface and the liquid–ice interface underscores the importance of early-time dynamics, when the unfrozen liquid remains mobile and gravitational effects are most pronounced. Decomposition of the liquid motion into capillary- and gravity-driven contributions provides physical insight into contact-line pinning, receding-edge thinning, and the development of asymmetric liquid–ice contact angles. Increasing the Stefan number accelerates freezing, limits sliding-induced deformation, and reduces both the cusp angle and the post-freezing contact-angle contrast. Overall, this study establishes a physical framework for understanding the morphology of frozen droplets on inclined substrates. keywords Freezing dynamics, sliding droplet, inclined surface, numerical simulation, lubrication approximation † † affiliation: 1 Department of Chemical Engineering, Indian Institute of Technology Hyderabad, Sangareddy 502 284, Telangana, India 2 Department of Chemical Engineering, Aristotle University of Thessaloniki, Thessaloniki 54124, Greece 3 Department of Mechanical Engineering, Indian Institute of Technology Ropar, 140001 Rupnagar, India 1 Introduction Freezing of liquid droplets on a cold surface is a fundamental multiphysics phenomenon relevant to a wide range of natural and engineering processes, including cloud microphysics ( Pruppacher & Klett 1980 ; Hanna et al. 2008 ) , freezing rain formation ( Zerr 1997 ; Mensah & Choi 2015 ) , cryopreservation ( Mazur 1970 ) , food processing and storage ( James et al. 2015 ; Celli et al. 2016 ; Zhao & Takhar 2017 ; Zhu et al. 2021 ) , freeze-drying technologies ( Franks 1998 ; Assegehegn et al. 2019 ) , thermal management ( Sharma et al. 2022 ) , controlled fabrication of porous materials and microstructures ( Qian & Zhang 2011 ; Li et al. 2012 ) , and icing phenomena on aircraft and civil infrastructure ( Cao et al. 2015 ; Myers & Thompson 1998 ) , to name a few. The solidification of a droplet is driven by a complex interplay of latent heat release, thermally induced phase change, interfacial wetting and capillary forces, gravitational and viscous effects, and substrate interactions. The nonlinear interaction of these processes makes droplet freezing a rich and challenging problem in interfacial fluid mechanics. Over the past decades, extensive research has yielded a detailed understanding of the freezing behaviour of sessile, stationary droplets on flat surfaces ( Jung et al. 2012a ; Jung et al. 2012b ; Wang et al. 2022 ; Kavuri et al. 2023 ; Kavuri et al. 2025 ) . These studies have established that freezing proceeds in two distinct stages. The first is the recalescence stage, during which rapid ice nucleation and crystal growth occur as supercooling drives solidification, releasing latent heat and triggering a transient temperature rise ( Feuillebois et al. 1995 ; Hindmarsh et al. 2003 ; Hu & Jin 2010 ; Jung et al. 2012b ) . This temperature rise has been attributed to the rapid restructuring and percolation of the hydrogen-bond network in water ( Tavakoli et al. 2015 ) . Once the droplet reaches its melting temperature, the process transitions to a slower, typically conduction-controlled freezing stage in which the solid–liquid interface gradually advances from the substrate toward the apex of the droplet ( Zadravzil et al. 2006 ; Jung et al. 2012b ; Kavuri et al. 2023 ) . Concurrently, vapor condensation on the cold substrate surrounding the droplet leads to the formation of frost halos ( Jung et al. 2012b ; Kavuri et al. 2023 ) . A striking characteristic of droplet freezing is the development of a pointed ice tip during the final stage of solidification, where volume expansion arising from the density difference between liquid water and ice produces an inflection at the apex and a distinct cusp-like morphology ( Sanz et al. 1987 ; Anderson et al. 1996 ; Zadravzil et al. 2006 ) . This phenomenon, governed by interfacial thermodynamics and curvature constraints and strongly influenced by environmental and material properties such as humidity, salinity, and substrate thermal properties, has led to extensive experimental research and sustained interdisciplinary interest in freezing of sessile droplets ( Anderson et al. 1996 ; Hu & Jin 2010 ; Jung et al. 2012b ; Zhang et al. 2016 ; Marin et al. 2014 ; Jung et al. 2012a ; Zhang et al. 2017 ; Zhang et al. 2019 ) . Further studies have revealed a strong sensitivity of freezing behaviour to ambient conditions, with Kavuri et al. 2023 and Sebilleau et al. 2021 ; Kavuri et al. 2025 demonstrating that relative humidity and temperature play a key role in controlling frost halo formation and freezing duration. Using a two-dimensional coupled level-set and volume-of-fluid model together with an enthalpy-porosity approach, Wan et al. 2023 reported that increasing salinity slows the freezing process, resulting in longer solidification times for seawater droplets. Recently, Lyu et al. 2023 demonstrated that an environmental medium with high thermal conductivity enhances external cooling, alters the freezing-front dynamics, promotes earlier crust formation, and ultimately modifies the final frozen morphology of the droplet. The influence of surface roughness has also been explored ( Suzuki et al. 2007 ; Hao et al. 2014 ; Fuller et al. 2024 ) . Their studies showed that textured or hydrophobic surfaces introduce greater thermal resistance at the droplet–substrate interface, increase the freezing temperature, and prolong the overall freezing time. The impact and solidification of water droplets on cold substrates have also been extensively investigated. Thiévenaz et al. 2019 ; Thiévenaz et al. 2020a ; Thiévenaz et al. 2020b examined the coupled impact and freezing dynamics, elucidating contact-line pinning, dewetting and retraction behaviour, as well as the influence of interfacial ice growth on droplet spreading. Furthermore, Knight 1967 ; Demmenie et al. 2023 ; Demmenie et al. 2025 ; Thiévenaz et al. 2020a ; Sarlin et al. 2025 demonstrated the partial wetting of water on ice, reporting a finite equilibrium contact angle of approximately 12^{\circ} near the melting point, along with its strong temperature dependence due to contact-line pinning induced by crystallization at lower temperatures. This is consistent with the thermodynamic interpretation of MacDowell 2026 , which shows that finite contact angles can coexist with a nanometric premelting film. In addition, Huerre et al. 2025 provide a comprehensive review of the coupling between capillary flow and solidification, emphasizing the key mechanisms and open questions

Read the complete text