Phase-Transition Induced Domain Evolution and Magnetization Dynamics in FePt/FeRh Bilayers for Efficient Heat-Assisted Magnetic Recording Preprint: APS/123-QED
Saroj K. Mishra, Y. Sasaki, S. Isogami, I. Suzuki, Keerthana P, J. Mohanty, Y. K. Takahashi · 2026
Read Phase-Transition Induced Domain Evolution and Magnetization Dynamics in FePt/FeRh Bilayers for Efficient Heat-Assisted Magnetic Recording Preprint: APS/123-QED by Saroj K. Mishra, Y. Sasaki, S. Isogami, I. Suzuki, Keerthana P, J. Mohanty, Y. K. Takahashi (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-27370.txt.
Introduction
Mishra and six colleagues tackle heat-assisted recording, where FePt media demand laser heating because of high coercivity and a high Curie temperature. They test FePt layered with FeRh, whose switch from antiferromagnetic to ferromagnetic near 350 kelvin creates coupling that helps flip magnetization. The bilayer cuts coercivity by 40 percent from 300 to 400 kelvin, against only 8 percent for FePt alone, and shrinks domains by 30 percent. Because the FePt anisotropy stays intact, they attribute the gain to domain-wall mobility and interfacial coupling rather than softening.
Catalog record
| CREATOR | Saroj K. Mishra, Y. Sasaki, S. Isogami, I. Suzuki, Keerthana P, J. Mohanty, Y. K. Takahashi |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36220 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.27370
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Phase-Transition Induced Domain Evolution and Magnetization Dynamics in FePt/FeRh Bilayers for Efficient Heat-Assisted Magnetic Recording Preprint: APS/123-QED Saroj K. Mishra, Y. Sasaki, S. Isogami, I. Suzuki, Keerthana P, J. Mohanty, Y. K. Takahashi Abstract Achieving ultrahigh recording densities with low power consumption is a central challenge for next-generation heat-assisted magnetic recording (HAMR), as conventional L 1 0 L1_{0} -FePt media require intense laser heating due to their high coercivity ( μ 0 H c \mu_{0}H_{c} ) and high Curie temperature ( ∼ \sim 700 K). Here, we address this issue using FePt/FeRh bilayers, where the antiferromagnetic-to-ferromagnetic transition of FeRh near 350 K generates strong interfacial exchange coupling that assists magnetization switching in the FePt layer. Magnetometry measurements reveal a 40% reduction in μ 0 H c \mu_{0}H_{c} from 300 K to 400 K in the bilayer, compared to only 8% in single-layer FePt. Temperature-dependent MFM directly captures phase-transition-induced domain evolution, showing a 30 % 30\% reduction in domain size and enhanced phase contrast. TR-MOKE measurements reveal only a minor ( ∼ \sim 0.4 T) modification of the effective anisotropy field during phase-transition, confirming that the intrinsic anisotropy of FePt remains largely preserved. These results demonstrate that the reduction in μ 0 H c \mu_{0}H_{c} in FePt/FeRh bilayers is primarily governed by phase-transition-induced domain-wall mobility coupled with interfacial magnetic interactions, rather than by intrinsic anisotropy softening. This mechanism provides a pathway toward efficient magnetization switching under reduced thermal load, making FePt/FeRh heterostructures promising candidates for advanced HAMR media. I INTRODUCTION The rapid expansion of digital technologies and data-centric applications has driven a significant increase in global demand for information storage 22 ; 25 . Large-scale data centers, which form the backbone of modern cloud computing and artificial intelligence infrastructures, rely predominantly on hard disk drives (HDDs) owing to their high storage capacity, nonvolatility, long-term reliability, and low cost per bit 41 ; 39 . Sustained increases in areal density are therefore essential to meet future storage requirements while simultaneously limiting data center energy footprints. Current commercial HDDs operate at areal densities of approximately 1.5 Tbit/in^{2} , and next-generation technologies aim to exceed 4 Tbit/in^{2} and beyond 1 ; 37 ; 14 ; 23 . Achieving such ultrahigh recording densities necessitates a substantial reduction in the size of the magnetic grains that collectively store each bit of information. However, decreasing the grain volume inevitably compromises thermal stability, which is governed by the formula K_{u}V/K_{B}T>60 , where K_{u} is the uniaxial magnetic anisotropy, V is the grain volume, K_{B} is the Boltzmann constant, and T is the temperature 35 . Conventional CoCrPt-based perpendicular magnetic recording media cannot satisfy this condition at grain sizes below approximately 5 nm 24 . L1_{0} -ordered FePt has therefore emerged as a key material for next-generation recording media due to its exceptionally large K_{u} , which ensures long-term thermal stability even at nanometer-scale grain sizes 4 . Despite this advantage, the very high K_{u} of L1_{0} -FePt results in a large coercive field ( \mu_{0}H_{c} ), making magnetization switching difficult with conventional write heads. In addition, reducing the grain size to increase areal density decreases the magnetic volume, lowering the signal-to-noise ratio (SNR) due to reduced readback signal amplitude and increased statistical fluctuations. This fundamental trade-off among thermal stability, writeability, and SNR is commonly known as the magnetic recording trilemma 33 . Heat-assisted magnetic recording (HAMR) has been developed as a practical solution to this challenge by temporarily heating the recording media to a temperature close to FePt’s Curie temperature ( T_{c} ) during the write process 36 . Localized laser heating reduces the K_{u} and \mu_{0}H_{c} of FePt, enabling magnetization reversal with a moderate write field, followed by rapid cooling to restore thermal stability, ensuring long-term data retention. Although HAMR has reached commercial deployment, further improvements in areal density and device reliability remain limited by the high operating temperatures required for writing 34 . In FePt-based media, the Curie temperature approaches 700 K 40 , and repeated exposure to such extreme thermal conditions can induce material degradation, structural deformation, and damage to both the recording media and the write head components 32 ; 13 ; 38 . In addition, the lubricants that protect the recording medium’s surface can deteriorate when subjected to repeated or prolonged thermal cycling 42 . Consequently, reducing the required thermal load during HAMR writing is a critical materials and device challenge for next-generation HDD technologies. In this context, alternative approaches that lower the switching field without relying solely on near T_{c} heating are highly desirable. One promising approach to address this challenge is to exploit interfacial magnetic interactions in engineered heterostructures, where additional degrees of freedom can assist magnetization reversal without sacrificing long-term thermal stability. Figure 1: Schematic illustration of Thermally driven exchange-coupling-assisted magnetization switching in FePt/FeRh bilayer. Before the phase transition, FeRh is in the AFM phase with no net moment, resulting in negligible interfacial exchange coupling with FePt. Upon heating above the phase transition temperature, FeRh transforms to the FM phase, establishing strong interfacial exchange coupling that facilitates magnetization switching in the FePt layer. In this work, we investigate FePt/FeRh bilayers with perpendicular magnetic anisotropy (PMA), as schematically illustrated in Fig. 1, to elucidate the mechanism of thermally driven magnetization behavior. FeRh is known to undergo a first-order magnetic phase transition from an antiferromagnetic (AFM) ground state at room temperature (RT) to a ferromagnetic (FM) state upon heating to approximately 350 K 6 ; 29 . At RT, the AFM FeRh layer carries no net magnetization, thereby preserving the high thermal stability of the FePt recording layer. However, when the temperature exceeds the phase-transition threshold, FeRh develops an FM moment and becomes strongly exchange-coupled to FePt at the interface. This thermally induced evolution of interfacial magnetic coupling modifies the magnetization reversal process in FePt, enabling switching at lower temperatures compared to conventional HAMR, where reversal primarily relies on the reduction of K_{u} near the T_{c} of FePt. Early studies by Thiele~et~al. demonstrated that exchange-coupled FePt/FeRh bilayers exhibit a pronounced reduction in \mu_{0}H_{c} upon heating, arising from the thermally induced AFM-to-FM phase transition of FeRh and the formation of an exchange-spring system 31 . Subsequent investigations by Lu~et~al. provided detailed insight into the temperature-dependent magnetization reversal processes in epitaxial FePt/FeRh bilayers, revealing a transition from exchange bias to exchange-spring behavior and a two-step reversal mechanism governed by domain wall (DW) nucleation and propagation across the soft-hard magnetic interface 11 . Complementary work by Nguyen~et~al. focused on exchange-bias effects in FePt/FeRh bilayers, reporting a strong K_{u} and a thickness-dependent modulation of \mu_{0}H_{c} , and emphasizing the importance of interfacial coupling in determining the magnetic response 19 . Koyama~et~al . further clarified the roles of FeRh thickness and nucleation fields, showing that a significant reduction in \mu_{0}H_{c} occurs only when the FeRh layer effectively participates in magnetization twisting during its magnetic phase transition 8 . While these studies collectively established the fundamental temperature-dependent magnetic behavior and the reduction in \mu_{0}H_{c} in FePt/FeRh systems, which primarily focused on quasi-static magnetic properties and did not explicitly address thermally driven exchange coupling as a dynamic switching mechanism under HAMR-relevant conditions. In this work, we extend beyond \mu_{0}H_{c} reduction and conventional exchange-spring phenomenology by