The effect of Van der Waals interaction on the microstructure of EPD deposits: a simulation study

Rémi Martin, Sandrine Duluard, Céline Merlet · 2026

Read The effect of Van der Waals interaction on the microstructure of EPD deposits: a simulation study by Rémi Martin, Sandrine Duluard, Céline Merlet (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-26987.txt.

Introduction

Martin, Duluard and Merlet use particle simulations to study how aggregation shapes deposits in electrophoretic deposition, a coating method prized for thick single-step coats. While many tunable parameters make choice daunting, particle models reveal deposit microstructures across settings. Their runs show self-cohesion changes structure near the substrate and in the bulk, tied to the deposits' mechanical signature. At high electric field the cohesion effect mostly vanishes beyond a critical strength, marking a shift from a clumping regime to one ruled by volume exclusion.

Catalog record

CREATORRémi Martin, Sandrine Duluard, Céline Merlet
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE62321
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.26987

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The effect of Van der Waals interaction on the microstructure of EPD deposits: a simulation study Rémi Martin, Sandrine Duluard, Céline Merlet Abstract Electrophoretic deposition is a method of choice for generating coatings thanks to its ease of implementation and its ability to produce coatings of relatively large thicknesses in a single step process. While this process also benefits from a large number of tunable parameters to adapt the coating to each application (applied electric field, particle concentration, viscosity of the suspension, etc…), such a freedom can lead to the selection of parameters being an overwhelming task. A better fundamental understanding of the microscopic phenomena and mechanisms at play during deposition can provide clues for the more efficient design of optimized coatings. Particle-based models, allowing for the simulation of deposit microstructures for various process parameters, are particularly interesting to get insights in such systems. Nevertheless, such studies are rare and usually do not involve the possibility of self-cohesion between particles, while it seems crucial for the final structure of the deposit. Here, we use particle-based simulations to study the influence of aggregation on the deposit formed for different applied electric fields. We show that the self-cohesion indeed leads to different microstructures, both in the close vicinity of the substrate and in the bulk of the deposit, and relate this to the mechanical signature of the deposits. Our results reveal that at high electric field, the influence of self-cohesion on resulting microstructures essentially vanishes beyond a critical field strength. This marks the transition between a deposition regime affected by aggregation to a regime largely dominated by volume exclusion effects. I Introduction Electrophoretic deposition (EPD) is a cost-effective and versatile technique used to deposit a wide range of materials onto a substrate under various tunable conditions Boccaccini and Zhitomirsky 2002 ; der Biest and Vandeperre 1999 . In this process, a colloidal suspension is subjected to an external voltage, particles are driven by the resulting electric field and aggregate into a cohesive network on the surface upon local densification. The vast space of processing conditions inherent to EPD has enabled its adaptation to a wide range of applications Besra and Liu 2007 ; Amrollahi et al. 2016 . However, optimizing a parameter set to reliably yield the targeted deposit characteristics remains largely empirical and application-specific Corni et al. 2008 . The green deposits, before any subsequent treatment, are composed of loosely packed particles, and the packing fraction of a deposit as well as its porosity, and more generally its microstructure, depend on the deposition conditions. This aspect of the deposits still remains to this day particularly challenging to control, as non-trivial interactions emerge between process parameters, as recent efforts in this direction illustrate Prioux et al. 2020 . Figure 1: Snapshots extracted from a particle-based simulation of EPD. Starting from an homogeneous suspension, the particles migrate, over time they accumulate on the substrate and eventually form a deposit. Macroscopic simulations at the continuum level have proven useful for investigating the deposition kinetics and deposit thickness over complex geometries Verma et al. 2020 ; Salazar de Troya et al. 2021 . Modeling the colloids as a concentration field surrounding the workpiece, and formulating their transport under the influence of an electrical potential enables the prediction of the time evolution of thickness distribution, provided that the film’s packing fraction is prescribed. By contrast, particle-based approaches capture microstructure characteristics that typically cannot be explicitly described in continuum models, including but not limited to, the deposit packing fraction which naturally emerges from particle simulations. Figure 1 illustrates the growth over time of a deposit against a planar surface, Figure 2 shows the typical structure of the resulting deposits. However, the current performance of these approaches does not allow for the description of the full range of time and length scales relevant for the deposition process. As shown by Giera et al. Giera et al. 2017 , such simulations produce deposits organized at the interface in a layered region, followed by a more homogeneous core. Their study highlights the value of this approach for improving our understanding of the relationship between the deposition conditions and the coating microscopic characteristics. In what follows, we adopt the methodology developed by Giera et al. by tuning the interaction potential in order to introduce barrier-limited aggregation. Figure 2: Structure of the deposit at the end of the simulation showing a layered region, close to the planar substrate on the left, and a more homogeneous core. The structure can be characterized through particle densities (number of particles per volume), given as a function of the distance to the substrate. A self-cohesion mechanism is crucial to form a deposit that persists beyond mere particle build-up at the surface. In practice, it is often ensured by inter-particle aggregation, linking deposit formation to colloidal stability in the suspension. The stability of colloidal suspensions is traditionally understood through the framework of Derjaguin-Landau-Verwey-Overbeek (DLVO) theory Derjaguin and Landau 1941 ; Verwey and Overbeek 1948 . Despite the ability of particles to irreversibly aggregate when brought sufficiently close, falling in the deep well of their pair potential, a suspension can be made kinetically stable by the presence of a significant energy barrier Israelachvili 2011 . In their work, Giera et al. used a fixed DLVO pair potential parametrized in such a way to model the deposition of an effective system of non aggregating particles, using an essentially repulsive potential compared to the average thermal energy. The DLVO theory, even though its simplicity and accuracy allows for useful modeling and derivations, fails at describing some limiting cases that may appear in some EPD protocols, such as electrically conductive particles, local ion concentration gradients, multi-body effects. In an attempt to address this concern, Karnes et al. developed a methodology that aims to overcome some of these limitations, by introducing an adaptive physics, changing on the fly the physical behavior of colloids Karnes et al. 2024 . For instance, their model takes into account particle electric discharge or post-deposition breakups. Overall, these previous studies have shown that particle simulations naturally capture some characteristics of the deposit microstructure, but to the best of our knowledge, they have not been used yet to explicitly test the scenarios of barrier-limited aggregation discussed in the EPD literature. Over the years, several deposition mechanisms have been proposed, involving (i) mechanically induced densification, (ii) electrochemically driven changes in suspension chemistry promoting flocculation, and/or (iii) particle discharge/charge neutralization at the electrode Sarkar and Nicholson 1996 . In the present work we study the pressure-driven mechanism, in the limit where the electric field is intense enough to initiate aggregation without the need for the pressure exerted by upper layers. For that purpose we carry out particle simulations of EPD where aggregation is represented by a fixed DLVO pair potential, independent of space and time, and we extract microstructure observables based on the particle and bond distributions. We investigate the repercussions of barrier-limited aggregation on the microstructure of EPD deposits in the high-Péclet regime where transport is largely dominated by drift, as the Péclet number corresponds to the ratio between electrophoretic velocity and bulk diffusivity of particles. In a DLVO-type description, the gap between particles bound in the primary minimum

Read the complete text