High Coupling Tunable Acoustic Resonators in Monolithic Barium Titanate
Ian Anderson, , Agham Posadas, Alexander A. Demkov, , and Ruochen Lu · 2026
Read High Coupling Tunable Acoustic Resonators in Monolithic Barium Titanate by Ian Anderson, , Agham Posadas, Alexander A. Demkov, , and Ruochen Lu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-26924.txt.
Introduction
Anderson and three colleagues test barium titanate films on silicon as a base for tunable acoustic resonators, filters for wireless bands. They excite symmetric Lamb modes in 120-nanometre membranes with a multi-cell electrode design that pairs strong coupling with workable impedance. Under DC bias, ferroelectric domains line up, letting voltage tune frequency and lift mode quality. The main resonance near 700 MHz shows a quality factor of 175 and coupling up to 25.1 percent, with modest series and parallel tuning.
Catalog record
| CREATOR | Ian Anderson, , Agham Posadas, Alexander A. Demkov, , and Ruochen Lu |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32262 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.26924
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
High Coupling Tunable Acoustic Resonators in Monolithic Barium Titanate Ian Anderson, , Agham Posadas, Alexander A. Demkov, , and Ruochen Lu Abstract The growing number of wireless communication bands has driven demand for compact, low-loss, and frequency-adjustable RF filtering. Tunable acoustic resonators are well-suited to address these needs, offering a path toward reconfigurable front ends with reduced component count. In this work, we extend upon previous conference results to investigate epitaxial barium titanate (BTO) grown on silicon as a platform for tunable acoustic resonators. We demonstrate lateral excitation of symmetric Lamb (S0) modes in 120 nm X-cut BTO membranes using a multi-cell electrode architecture that simultaneously achieves high electromechanical coupling and practical impedance levels. Devices are fabricated with laterally patterned electrodes on released BTO membranes. Under applied DC bias, ferroelectric domains align, allowing electrical excitation, frequency tuning, and quality-factor enhancement of acoustic modes. The primary resonance near 700 MHz exhibits a Bode quality factor of 175, electromechanical coupling up to 25.1 % , and series and parallel resonance tunability of 2.3 % and 5.6 % , respectively. Voltage-dependent material parameters, including permittivity, stiffness, and piezoelectric coefficients, are extracted through a combination of modified Butterworth–Van Dyke modeling and finite-element simulation to explain the observed trends. These results highlight monolithic BTO on silicon as a promising material system for laterally excited, tunable acoustic resonators for reconfigurable RF applications. I Introduction Mobile communications have evolved tremendously in the past few decades. With increasing technological capabilities come increasing consumer demands, including higher data rates, smaller sizes, and lower power consumption [ 49 ] . As the mobile industry seeks to increase the data-processing and communication capabilities of each individual device, so too must the radio frequency (RF) front-end modules keep pace and enhance their capabilities. When it comes to selecting one signal from many in a sea of wireless traffic, the acoustic filter dominates due to its smaller size, low power consumption, and frequency-selection capabilities [ 17 , 20 ] . Acoustic filters face a slew of difficulties in modernizing to meet current market demands. High-frequency devices are difficult to design and fabricate due to size limitations [ 4 , 39 , 32 , 29 ] ; a larger number of bands requires more filters, approaching nearly 100 in a single device [ 13 ] . In particular, switching between these bands is quite difficult because it requires a switch for each filter, meaning that scaling the filter volume comes with more than just the cost of the individual device. To this end, a proposed solution is to use a switchable or tunable filter across multiple frequencies. Current technologies for tunable filters generally look beyond acoustics, particularly those utilizing magneto-static filters [ 11 , 10 ] , electromagnetic (EM) cavity/microstrip filters [ 40 , 16 ] , or RF Microelectromechanical Systems (MEMS) varactor filters [ 8 , 12 ] . While these solutions are ideal for larger devices, EM filters are still too large for current frequency bands, and magnetostatic filters often require strong magnetic fields to achieve adequate tuning. To date, the design of tunable RF Filters remains elusive as it requires modulation of the material stiffness, a task not easy to achieve. Fig. 1: (a) Optical image of device with 15 cells, with pictorial zoom in on single cell (b) side profile schematic highlighting layer thickness. For tunable acoustic resonators, an ideal candidate is the class of materials known as ferroelectrics, which are inherently piezoelectric. Ferroelectric materials differ from standard dielectrics in the nonlinearity of their dielectric permittivity. When driven by an electric field, the electrons align to screen the incoming field and saturate the polarization, resulting in a changing permittivity with applied bias and a hysteretic PE relationship. For acoustic devices, this implies changes in device coupling and stiffness through piezoelectric effects. Materials such as Scandium Aluminum Nitride (ScAlN) [ 53 , 15 ] (or ferroelectric enhanced AlBScN [ 45 ] ), or Lithium Niobate (LN) [ 50 , 18 ] are leading materials for acoustic resonators, and, what’s more, they are ferroelectric; however, demonstrations of tunability in these materials remain difficult, as they require large fields or very thin films [ 37 , 48 , 19 , 23 , 3 ] . Alternate materials have also been demonstrated to be suitable for tunable filters. Hafnia Zirconia (HfZrO) resonators have been demonstrated at 9 GHz using Lamb modes with relatively low applied voltage [ 43 , 44 ] . Lead Zirconium Titanate (PZT) finds applications in tunable resonators for lower frequency ranges, but fails to scale up due to high dielectric loss [ 21 ] . Barium Strontium Titanate (BST) has found substantial success with film bulk acoustic wave resonator (FBAR) designs in the GHz range, showing high quality factor ( Q ) and coupling, with practical tunable filter designs [ 52 , 51 , 27 , 33 , 6 ] . Its ferroelectric counterpart, Barium Titanate (BTO), exhibits greater capacitive tuning due to larger nonlinearities in permittivity, enabling broader tuning ranges [ 26 ] . Unfortunately, these high-capacitance materials (BTO, BST, PZT, etc.) generally suffer from performance degradation at high frequencies due to challenges such as low material quality, high dielectric loss, and process integration difficulties. In recent years, it has been shown that high-quality BTO can be grown epitaxially on Silicon (Si) using a Strontium Titanate (STO) buffer layer for strain management [ 25 , 35 ] . Given their typical use in optical and ferroelectric devices, such films are likely ideal candidates for the design of acoustic resonators [ 24 , 36 ] . Fig. 2: Schematic representation of electrode design, highlighting how we have no coupling for designs with more than one cell. In this paper, we build on previous conference work [ 2 ] in which we demonstrated initial results for single-cell bar-type acoustic resonators, achieving a coupling of 3 % or 8 % , depending on mode, and good tunability of around 3 % or 1 % . Here, to achieve much higher-coupling devices closer to 50 \Omega , we extend the design using the same stack, aiming for a parallel device configuration at higher frequencies. By designing electrode placement to better couple into our stress profile, we achieve over 3x the coupling of previous devices, up to 25.1 % , with series and parallel resonance tunability of 2.3 % and 5.6 % , respectively. The paper is organized as follows. Section II describes the fabrication process, focusing on device design and stack characterization. In Section III , devices are characterized across their voltage-tuning range and tested for power handling and temperature stability. Section IV explains these results by varying material parameters to account for shifts in resonance frequency and voltage-dependent coupling behavior. Section V then uses this model to implement an alternative split-electrode design that increases the resonator body size without requiring precise etched hole arrangements. Section VI discusses the intrinsic loss extraction with acoustic delay lines. Section VII details the comparison to State-of-the-Art (SoA) tunable acoustic resonators. Fig. 3: XRD analysis figures showing (a) 2 \theta scans highlighting out-of-plane lattice constant and orientation, and (b) rocking curve for material quality. II Device Design and Fabrication The device design follows the configuration shown in