Impulse-driven capillary detachment

Dilip Kr. Maity 1, Sandip Dighe 1, Nilamani Sahoo 1, Tadd Truscott 1 · 2026

Read Impulse-driven capillary detachment by Dilip Kr. Maity 1, Sandip Dighe 1, Nilamani Sahoo 1, Tadd Truscott 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-26407.txt.

Introduction

Maity and three colleagues studied how a droplet on a taut wire breaks free when the wire is plucked and released. The transverse wave briefly forces the droplet base, stretching it before sheet formation and jet breakup. Maximum stretch before detachment follows the mechanical work passed through three-phase contact-line traction, balanced against viscous loss during filament extension. That balance names the contact line as the route from impulse to capillary deformation.

Catalog record

CREATORDilip Kr. Maity 1, Sandip Dighe 1, Nilamani Sahoo 1, Tadd Truscott 1
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24063
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.26407

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Impulse-driven capillary detachment Dilip Kr. Maity 1, Sandip Dighe 1, Nilamani Sahoo 1, Tadd Truscott 1 Abstract Capillary interfaces subjected to impulsive forcing arise in many natural and technological systems, yet the pathway by which rapid substrate motion is converted into droplet detachment remains unclear. Here we study this process in a controlled setting: a liquid droplet resting on a taut wire that is plucked and suddenly released. The resulting transverse wave imparts a brief inertial forcing at the droplet base, initiating rapid stretching that precedes sheet formation and jet breakup. We show that the maximum extension prior to detachment is set by the mechanical work transmitted from the wire through capillary traction at the three-phase contact line, balanced by viscous dissipation during filament extension. This energetic balance identifies the contact line as the pathway by which mechanical impulse is converted into capillary deformation and governs impulsive droplet detachment. keywords Droplets on wires, inertia-driven breakup † † affiliation: 1 Department of Mechanical Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955, Kingdom of Saudi Arabia 1 Introduction Capillary interfaces often experience rapid forcing when the supporting substrate undergoes sudden motion. In such events, a mechanical impulse originating in the solid must be transmitted to the liquid through the three-phase contact line, initiating deformation and eventual detachment. Although the relevant physical ingredients are well known (i.e., capillarity, inertia, and viscous dissipation), how they combine to determine droplet release under impulsive forcing has lacked a simple organizing principle. Figure 1. (a) A droplet ejecting from a wire is analogous to a raindrop detaching from grass blades after a sudden motion (see supplemental video 1). (b) Schematic of the experimental setup showing a copper wire held in tension by a centrally attached nylon wire, which is pulled down and then suddenly released. (c) The vertical displacement ( z ) of the wire at the droplet position for three wire diameters and multiple tensions (2.94 to 53.96 N). (d) Vertical wire speed V as a function of horizontal wave speed V_{\mathrm{w}} , line represents V=\sqrt{T/M}\tan{\theta} . (e) Equilibrium droplet resting on the wire before excitation contact length ( a_{i} ) and droplet height ( b_{i} ). (f) Droplet shape just before it is released from the wire with final height b_{f} . Droplets are often detached from surfaces by sudden motions, such as raindrops flung from grass (Fig. 1 a), water shaken off from bird feathers ( 19 ) or wet mammals ( 4 ), or fog-harvesting ( 1 ; 10 ) fibers that vibrate in the wind or mechanical means ( 26 ). The process of detachment usually involves sufficient acceleration for the liquid droplet to be separated from the solid. Early in the process a jet forms between the solid and droplet which eventually breaks apart fragmenting into many smaller droplets. The breakup of droplets under rapid forcing arises from the simultaneous interplay of inertia driving elongation, viscosity dissipating kinetic energy, and surface tension resisting deformation. These forces act in the droplet bulk, at the droplet-solid, and droplet-air interfaces over rapid timescales. The jet fragmentation process is familiar in nature, such as raindrops breaking up in a storm ( 22 ), and in technology, such as inkjet printing ( 14 ). Extensive theoretical and experimental studies ( 5 ; 6 ; 25 ; 23 ; 22 ; 2 ; 11 ) have explored these forces in classical contexts such as droplet pinch-off and filament thinning. These frameworks have proven especially powerful in revealing the structure of fluid necking and capillary instabilities. However, droplet breakup becomes more complex under sudden shear forces (between the solid-liquid interface), and recent work shows that acoustic, magnetic or vibrational excitation, such as selective withdrawal, magnetic field or substrate shaking, can change conditions and modes of breakup ( 24 ; 20 ; 7 ; 18 ; 13 ; 8 ). Here, we explore one of simplest liquid-solid experiments where a liquid droplet rests on a taut wire that is pulled downward in the middle and then suddenly released (Fig. 1 b), a process we refer to as plucking the wire. The resulting impulsive excitation launches a transverse wave along the wire, imparting localized vertical acceleration at the droplet base. This inertia input triggers a rapid stretching stage that precedes sheet formation, rim collision, and jet fragmentation. We resolve these transient stages and examine how the interplay of inertia, surface tension, and viscosity governs the breakup pathway through high-speed imaging. We show that the stretching preceding detachment is governed by a simple energetic balance: mechanical work transmitted from the wire through capillary traction at the contact line is balanced by viscous dissipation within the elongating filament. This balance predicts the maximum droplet extension and therefore the release time across a wide range of fluids and excitation conditions. 2 Experimental method A representative image of a droplet being ejected from a grass blade following an impulsive disturbance is shown in Fig. 1 a, illustrating a natural phenomenon such as raindrop detachment caused by wind or mechanical agitation. To investigate this process systematically, we designed a laboratory setup using a taut wire under tension, as depicted in Fig. 1 b. A 160 mm long copper wire is horizontally suspended between two pulleys, with one end clamped to a fixed point and the other attached to a mass m to impose a controlled tension T=mg . A nylon wire is fastened at the midpoint and pre-tensioned to form a small deflection angle ( 3^{\circ} ). A droplet was deposited 1 cm away from the midpoint. We positioned the droplet close to the midpoint of the wire, just off the center, so that it primarily experienced vertical motion. Beyond this region, the wire exhibited a slight wavy motion. The nylon wire is burned by a lighter resulting in an impulsive upward motion of the wire due to the sudden release of tension. This method is more effective than cutting to reduce initial vibrations. We systematically vary wire diameter (0.3, 0.5, & 0.7 mm), droplet volume (ranging from 2 to 16 \mu L), and applied tension (ranging from 2.94 to 53.96 N). Experiments are conducted using water ( \mu=0.96~\mathrm{mPa\,s} , \sigma=72~\mathrm{mN\,m^{-1}} , \rho=998~\mathrm{kg\,m^{-3}} ), a 72% wt. glycerin–water mixture ( \mu=25~\mathrm{mPa\,s} , \sigma=65~\mathrm{mN\,m^{-1}} , \rho=1185~\mathrm{kg\,m^{-3}} ), ethanol ( \mu=1.1~\mathrm{mPa\,s} , \sigma=22.1~\mathrm{mN\,m^{-1}} , \rho=788~\mathrm{kg\,m^{-3}} ), and a 7 CMC aqueous SDS solution ( \mu=0.96~\mathrm{mPa\,s} , \sigma=33~\mathrm{mN\,m^{-1}} , \rho=998~\mathrm{kg\,m^{-3}} ). The vertical displacement of the wire center over time, shown in Fig. 1 c, confirms that the impulse causes a rapid rise with nearly constant velocity. This velocity V is found to scale linearly with the transverse wave speed V_{\mathrm{w}}=\sqrt{T/M} , where M is the mass per unit length of the wire, consistent with the relation V=V_{\mathrm{w}}\tan\theta=0.053V_{\mathrm{w}} (Fig. 1 d). Prior to excitation, the droplet rests stably on the wire as shown in Fig. 1 e, characterized by contact length a_{i} and vertical extent b_{i} . Following the impulsive pluck, the droplet stretches upward (Fig. 1 f), forming a narrowing column of fluid that results in the formation of a jet with a final height just before detachment denoted as b_{f} . 3 Results and discussion When a capillary droplet

Read the complete text