StreamGuard: Exploring a 5G Architecture for Efficient, Quality of Experience-Aware Video Conferencing

Xuyang Cao, Oliver Michel, Kyle Jamieson · 2026

Read StreamGuard: Exploring a 5G Architecture for Efficient, Quality of Experience-Aware Video Conferencing by Xuyang Cao, Oliver Michel, Kyle Jamieson (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-26223.txt.

Introduction

Cao, Michel, and Jamieson presented StreamGuard, a 5G design that protects video-call quality when radio resources run short. A monitor inside the radio network reads call quality, a controller picks priority actions balancing quality against fairness, and a marking module steers each subflow into the right queue. On a real testbed, call quality rose by up to 70 percent at similar background throughput.

Catalog record

CREATORXuyang Cao, Oliver Michel, Kyle Jamieson
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE89337
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.26223

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

StreamGuard: Exploring a 5G Architecture for Efficient, Quality of Experience-Aware Video Conferencing Xuyang Cao, Oliver Michel, Kyle Jamieson Abstract Video conferencing over 5G is increasingly prevalent, yet its Quality of Experience (QoE) often degrades under limited radio resources. This has two causes: 5G networks must serve many users, while interactive traffic requires careful handling. Motivated by the insight that different subflows within an interactive session have a disproportionate effect on QoE, we present the design and implementation of StreamGuard, a practical 5G architecture for subflow-level, QoE-aware prioritization. Also subsetStreamGuard forms a closed control loop with three components: (1) a monitor in the Radio Access Network (RAN) that uses deep packet inspection to infer QoE and RAN state, (2) a controller that selects prioritization actions to balance QoE and fairness, and (3) a marking module that applies these decisions by marking packets to steer subflows into appropriate priority queues. StreamGuard further shapes application behaviors via mechanisms including selective subflow dropping and probe-based rate control, to align application behavior with radio constraints. Implemented in a real 5G testbed, StreamGuard achieves a superior QoE–fairness tradeoff compared to vanilla 5G and prior state-of-the-art approaches, improving QoE by up to 70% at comparable background throughput or preserving up to 2× higher background throughput at similar QoE. 1 Introduction 5G New Radio (NR) has seen rapid adoption in recent years, promising higher bandwidth and lower latency than previous generations. Meanwhile, Real-Time Communication (RTC) applications, such as video conferencing, VoIP, and emerging LLM-based voice interaction, are increasingly deployed over 5G [ 62 , 32 ] . Despite these advances, RTC performance over 5G often remains unsatisfactory in compromised wireless channels and under contention, with issues like lag, frame rate (FPS) degradation, and resolution drops observed both in our experiments ( Fig. 1 ), and in prior studies [ 81 , 82 , 54 , 55 , 41 ] . Figure 1 : Zoom delay and FPS in a congested 15 MHz T-Mobile cell at low ( \approx 3 dB) and moderate ( \approx 15 dB) SNR, compared to a 15 MHz StreamGuard cell under low SNR and congestion. Even lightweight subflow-aware prioritization significantly improves QoE under adverse conditions. Many 5G benefits, especially the high bandwidth promised by Enhanced Mobile Broadband (eMBB) [ 35 , 4 ] , manifest mostly under ideal conditions (few users and high-signal-to-noise wireless channel). In practice, however, signal quality is often suboptimal due to factors like blockage, fading, and mobility [ 80 , 77 , 28 , 11 , 27 ] . Moreover, in dense areas, cell towers (gNBs) frequently serve many users (UEs) simultaneously and operate near full resource utilization [ 80 , 88 , 76 ] , leading to significant congestion. Similarly, while Ultra-Reliable Low Latency Communication (URLLC) [ 46 ] aims to support low-latency RTC traffic, it is not fully standardized nor widely implemented or deployed, and inefficiently consume spectrum when used naively [ 50 ] (more in § 3 ). Instead of leveraging eMBB and URLLC, most carriers treat all Internet traffic, including VoIP, as a single best-effort traffic class [ 6 , 12 , 73 ] , without prioritizing QoE-critical RTC data, in practice. As a result, particularly under poor wireless conditions and congestion, such traffic suffers, leading to degraded QoE or even unusable sessions, as Fig. 1 shows. Modern RTC applications such as Zoom [ 87 ] and WebRTC [ 30 ] follow the Application-Level Framing (ALF) principle [ 19 ] . They use RTP headers to define Application Data Units (ADUs), the smallest units of data meaningful to the application. ALF recognizes that not all ADUs need to be delivered perfectly for correct application functionality at the receiver. In RTC scenarios, ALF empowers the network to treat different parts of a flow differently under limited resources, prioritizing critical components so that they are delivered in time and can be continuously rendered at the receiver. In RTC, a flow consists of multiple ADU types, including video, audio, redundancy, and control messages, and each packet carries a unique ADU type [ 52 , 65 , 45 , 58 ] . Techniques such as Scalable Video Coding (SVC) [ 79 , 71 ] further split video into a critical base layer and optional enhancement layers . Losing base-layer frames disrupts decoding and causes freezes, while losing enhancement layers degrades quality ( e.g., resolution or smoothness) but preserves continuity. Figure 2 : Under limited capacity, 5G eMBB ( upper ) schedules Zoom ADUs indiscriminately, leading to insufficient base-layer delivery, undecodable enhancement layers, and poor QoE. StreamGuard ( lower ) performs base-layer prioritization, enhancement-layer dropping, and probe-based rate control to optimize RAN resources for QoE. Importantly, 5G NR QoS filters operate only at flow-level granularity (transport layer) using 3GPP packet detection rules [ 22 ] . Since RTP headers reside in the application layer, the RAN does not distinguish between different RTP stream types. As a result, the RAN cannot treat substreams differentially based on their importance. For example, it will allocate equal spectrum resources to both base-layer and enhancement-layer packets, and expend unneeded retransmissions on enhancement layers, resources that would be better used to protect QoE-critical base-layer frames. 5G QoS therefore leads to suboptimal application performance, as visualized in Fig. 2 and further shown in § 6 . By understanding application content, 5G networks can prioritize different ADUs, ensuring that QoE-critical data is delivered first while less important or non-interactive traffic may be delayed or dropped. For example, under poor channel conditions or congestion, transmission of the video base layer should be prioritized ( Fig. 2 ). This idea generalizes across applications. In cloud gaming, user inputs and synchronization data should be prioritized; in AR/VR, central views should take precedence over peripheral ones; and even mice traffic ( e.g., IoT or web) can benefit from prioritization at a granularity smaller than an entire flow [ 66 ] to reduce latency. This paper presents the design and implementation of StreamGuard, a NextG RAN design for subflow-level granularity prioritization in 5G that leverages application semantics to improve RTC QoE while balancing fairness. StreamGuard is an extensible framework, where application-specific logic ( e.g., application-layer subflow identification) is modularized via pluggable components, enabling support for diverse interactive applications. This paper presents the design and implementation of our StreamGuard prototype for Zoom, and makes the following contributions: Zoom Subflow Identification. We analyze Zoom’s ADU structure to identify its constituent subflows: audio, base-layer video, and enhancement-layer video, despite the lack of explicit header information. Using traffic analysis and studies [ 52 , 82 ] , we derive deep packet inspection (DPI) rules for subflow classification. QoE Monitoring in the RAN. We integrate DPI into the gNB to efficiently infer Zoom QoE in real time. The StreamGuard Monitor tracks key QoE metrics ( e.g., FPS, delay, bitrate) together with RAN signals ( e.g., MCS, CQI), providing inputs for the controller. Making Prioritization Decisions. The controller selects subflows to prioritize by evaluating candidate actions by predicting QoE gains and fairness costs, based on current QoE and RAN conditions. It then chooses the scheme that best balances QoE and fairness. Standards-Compliant Prioritization. StreamGuard realizes subflow prioritization within existing 5G mechanisms: in the downlink via DPI-based QoS Flow Identifier (QFI)

Read the complete text