Mass-Transfer Control With Microbubbles in Highly Turbulent Decaying Flows
2026
Read Mass-Transfer Control With Microbubbles in Highly Turbulent Decaying Flows (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-24520.txt.
Introduction
Kumar and five colleagues show that a tiny surfactant dose can tame bubble size in a fiercely turbulent pipe flow without changing the turbulence itself. Without additives, bubbles merge downstream and grow steadily, driven by how fast turbulent energy dissipates. A minute cut in surface tension boosts breakup, curbs merging, and narrows the size spread, giving plant operators a simple dial for bubble size and gas-liquid mixing.
Catalog record
| YEAR | 2026 |
|---|---|
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27211 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.24520
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mass-Transfer Control With Microbubbles in Highly Turbulent Decaying Flows Abstract We hypothesize that combining extreme turbulence with a minute reduction in surface tension σ \sigma (surface tension of the liquid) using surfactant provides a simple and scalable route for controlling micron scale bubble size in gas–liquid systems. To test this, we generate high-intensity turbulence using a multiphase pump [turbulent intensity ≥ 40 % \geq 40\% ; Taylor Reynolds number R e λ = 𝒪 ( 10 3 ) Re_{\lambda}=\mathcal{O}(10^{3}) ; bulk Reynolds number R e = 𝒪 ( 10 5 ) Re=\mathcal{O}(10^{5}) ] feeding a straight duct, which produces a decaying turbulent flow where, without additives, bubble coalescence dominates and causes monotonic downstream growth in the mean diameter d avg d_{\mathrm{avg}} of the bubbles. This growth is governed by the turbulent dissipation rate ε \varepsilon . High-speed imaging, back-lit shadowgraph and particle shadow velocimetry (PSV) quantify bubble statistics ( d avg d_{\mathrm{avg}} , and the bubble-size distribution) and turbulence metrics (turbulent kinetic energy k k , turbulence intensity ℐ \mathcal{I} , and dissipation rate ε \varepsilon ). We then introduce a minute amount ( ∼ 0.01 % \sim 0.01\% critical micelle concentration) of additive that produces a slight reduction in σ \sigma , used here only as an interfacial tuning knob because the same change in surface tension can be achieved with non surface active agents. This small decrease in σ \sigma enhances breakup, slightly suppresses coalescence, and makes smaller bubbles more breakup prone, resulting in reduced d avg d_{\mathrm{avg}} and a narrower bubble-size distribution. Turbulence statistics remain unchanged within experimental uncertainty, indicating that the effect arises entirely from interface rather than hydrodynamic changes. Overall, combining extreme turbulence with a minute reduction in surface tension offers a low complexity and tunable lever for setting bubble-size distributions and intensifying mass transfer in industrial multiphase flows. \ConfName Proceedings of the ASME 2026Fluids Engineering Division Summer Meeting \ConfAcronym FEDSM2026 \ConfDate July 26–29, 2026 \ConfCity Bellevue, WA \PaperNo FEDSM2026-184555 \SetAuthors Vivek Kumar, Prasoon Suchandra \CorrespondingAuthor [email protected], Jason Rom, Shivam Prajapati, Suhas Jain, Cyrus Aidun \SetAffiliation 1George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA Renewable Bioproducts Institute, Georgia Institute of Technology, Atlanta, GA 30332, USA keywords High-Re turbulent bubbly flows, shadowgraph imaging, surfactant-mediated flows \versionfootnote Documentation for asmeconf.cls : Version \versionno , August 10, 2026. {nomenclature} \entry D Duct hydraulic diameter \entry d Bubble diameter \entry d_{g} Geometric mean diameter \entry d_{\rm{H}} Hinze diameter \entry d_{\mathrm{avg}} Mean diameter \entry f(d) Bubble-size distribution \entry \mathcal{I} Turbulence intensity \entry K Total number of bins \entry k Turbulent kinetic energy \entry \mathcal{L}=x/D Normalized axial position \entry N Total number of bubbles detected \entry \rm{Re} Bulk Reynolds number, VD/\nu \entry \rm{Re}_{\lambda} Taylor-scale Reynolds number, \mathcal{U}\lambda_{T}/\nu \entry u Instantaneous velocity \entry \overline{u} Ensemble-averaged velocity \entry u^{\prime} Velocity fluctuation \entry \mathcal{U} Root-mean-square (rms) of velocity fluctuations \entry V Bulk velocity \entry \rm{We} Weber number \entry \Delta PSV vector spacing \entry \varepsilon Turbulent dissipation rate \entry \eta Kolmogorov scale \entry \nu Kinematic viscosity \entry \phi Void fraction \entry \Phi Cumulative fraction of bubbles with diameters smaller than d \entry \rho_{\ell} Liquid density \entry \sigma Surface tension \entry \sigma_{g} Geometric standard deviation (for bubble size) 1 Introduction Gas–liquid or multiphase flows occur widely across natural settings and engineered systems, encompassing chemical and biochemical reactors, oil–gas transport pipelines, aeration and wastewater treatment facilities, flotation units, heat exchangers, and heat-pipe pool boiling configurations [ 5 , 23 , 21 ] . In these flows, dispersed bubbles exert a strong influence on transport phenomena, including mass transfer, mixing efficiency, particle seperation, drag modification, and chemical reaction rates [ 3 , 20 ] . Bubble behavior in turbulent environments is governed by inherently stochastic processes such as interfacial deformation, liquid-film drainage, and topological transformations driven by coalescence and breakup [ 34 , 4 , 33 ] . Under such conditions in high-Reynolds-number flows, turbulent stresses break bubbles into smaller fragments and strongly dictate the subsequent downstream evolution of the two-phase flow, with direct implications for system performance and efficiency [ 19 , 13 , 51 ] . Characterizing and controlling the bubble-size distribution (commonly represented using modified Gaussian or log-normal forms) is therefore a central requirement, as it determines the relative population of small and large bubbles and governs the available interfacial area. Even in the measurement of dynamic surface tension using the bubble pressure tensiometer method [ 22 ] . The statistical distribution of bubble sizes in turbulent flows emerges from a balance between breakup and coalescence events. In theoretical and numerical frameworks, this balance is commonly captured through population-balance formulations coupled to the resolved or modeled turbulence, where size redistribution is governed by breakup and coalescence kernels derived from physical arguments and calibrated empirically [ 16 , 28 , 29 , 30 ] . Breakup is initiated when turbulent inertial forces exceed stabilizing surface tension, resulting in fragmentation above a threshold Weber number [ 19 , 13 , 36 ] . In turbulence, the Weber number can be expressed as \mathrm{We}\;=\;2.13\,\frac{\rho_{\ell}}{\sigma}\,(\varepsilon d)^{2/3} (1) where d is the bubble diameter, \varepsilon represents the local turbulent dissipation rate, \sigma is the interfacial tension, and \rho_{\ell} is the liquid density [ 36 ] . The largest bubble that can persist without breaking corresponds to the critical Weber number, \mathrm{We}_{\mathrm{crit}} , and defines the Hinze diameter, d_{\mathrm{H}} [ 13 , 11 ] . The surface tension of the working liquid is \sigma=72\,\mathrm{mN/m} , and the critical Weber number is \mathrm{We}_{\mathrm{crit}}\approx 1.1 . The presence of surfactants lowers the effective interfacial tension, thereby reducing the Hinze scale and rendering bubbles more susceptible to turbulent fragmentation. As a result, breakup can occur at lower turbulent dissipation levels, shifting the bubble-size distribution toward smaller diameters. The presence of surfactants modifies bubble-bubble interactions by altering interfacial mobility and film stability. Although elevated turbulence promotes frequent collisions, the associated strong shear and unsteady velocity gradients significantly reduce the effective contact time during bubble encounters. When surfactants are present, liquid-film drainage is further slowed by reduced surface tension and surfactant-induced Marangoni stresses, which stabilize the interfacial film and suppress coalescence even under frequent collisions [ 31 , 10 ] . In addition, wake-induced entrainment by larger bubbles generates localized flow structures that enhance spatial heterogeneity in bubble concentration and collision dynamics. As a consequence, highly turbulent, surfactant-laden flows often exhibit a regime in which collision frequency is high but net coalescence remains limited, emphasizing the complex and competing roles of turbulence and interfacial physics in determining bubble population evolution [ 26 , 31 , 10 , 25 ] . These observations underscore the need to extend traditional coalescence models to explicitly account for the coupled effects of turbulence intensity, interfacial modification by surfactants, and wake-driven flow structures in high-Reynolds-number bubbly flows [ 25 ] . Despite their widespread use, existing coalescence models face fundamental challenges when applied to the extreme and rapidly evolving turbulence encountered downstream of pumps and injectors, where bulk Reynolds numbers reach \mathrm{Re}=VD/\nu\sim 10^{5} and Taylor-scale Reynolds numbers approach \mathrm{Re}_{\lambda}=\mathcal{U}\lambda_{T}/\nu\sim 10^{3} . Here, V denotes the bulk mean velocity, D the hydraulic diameter of the duct, \nu the kinematic viscosity, \mathcal{U} the root-mean-square of velocity fluctuations, and \lambda_{T} the Taylor microscale.