Deterministic Nucleation and Dynamics of Infilled Multiply-Charged Vortices in an Immiscible Rb 87 {}^{87}\mathrm{Rb} – K 41 {}^{41}\mathrm{K} Mixture
R. Doran, K. E. Wilson · 2026
Read Deterministic Nucleation and Dynamics of Infilled Multiply-Charged Vortices in an Immiscible Rb 87 {}^{87}\mathrm{Rb} – K 41 {}^{41}\mathrm{K} Mixture by R. Doran, K. E. Wilson (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-24511.txt.
Introduction
Doran and Wilson propose a laser-stirring recipe for making vortices with several units of twist inside a mixed rubidium-potassium condensate. The second fluid fills each vortex core. Turning the stir knobs sets the twist count in a repeatable way, yielding stable high-twist vortices on demand. In a round trap the vortices wheel around slowly at a twist-dependent rate, breathe with their filling fluid, and at large twist break apart through distinct instabilities.
Catalog record
| CREATOR | R. Doran, K. E. Wilson |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 48342 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.24511
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Deterministic Nucleation and Dynamics of Infilled Multiply-Charged Vortices in an Immiscible Rb 87 {}^{87}\mathrm{Rb} – K 41 {}^{41}\mathrm{K} Mixture R. Doran, K. E. Wilson Abstract We propose a method for controllably generating multiply-charged vortices in immiscible Bose-Einstein condensates. We achieve this by applying a laser stirring technique to a Rb 87 {}^{87}\mathrm{Rb} – K 41 {}^{41}\mathrm{K} mixture, where the vortices generated are infilled by the secondary component. We numerically demonstrate that the charge of the vortex can be tuned reproducibly by varying the stirring parameters, allowing the deterministic generation of stable infilled vortices with high topological charge. We then consider the dynamics of these multiply-charged vortices in a circular trap; in contrast to single-component condensates, we observe long-lived precession of the multiply-charged vortices with a charge dependent frequency and collective breathing modes of the infilling component. For sufficiently large winding numbers, we observe distinct dynamical instabilities leading to vortex dislocation. I Introduction Turbulence is responsible for the transport of energy in fluids, underpinning phenomena that range from atmospheric and ocean dynamics, to biological applications and aerodynamic engineering. As one of the fundamental building blocks of turbulence, it is hardly surprising that vortices have attracted great interest in superfluids formed of ultra-cold atomic Bose Einstein condensates (BECs). Here, unlike in a classical fluid, vortices are topologically protected entities with a fixed core size and a circulation that is quantized in units of Planck’s constant divided by the mass of the atomic species. Vortices can form spontaneously in a BEC in a variety of ways, such as through thermal quenches Weiler et al. 2008 similar to the Kibble-Zurek mechanism Kibble 1976 ; Zurek 1985 or by global phase transitions such as the Berezinskii-Kosterlitz-Thouless transition in a 2D system Hadzibabic et al. 2006 . Vortices can also be formed using mechanical methods: forcing the condensate to rotate by stirring with a laser spoon Madison et al. 2000 ; Abo-Shaeer et al. 2001 or spinning the trapping potential Hodby et al. 2001 leads to a regular triangular lattice of vortices, dragging a repulsive (blue-detuned) optical potential through the condensate faster than the critical velocity will nucleate vortices in the wake Inouye et al. 2001 ; Kwon et al. 2015 ; Kwon et al. 2016 , while dragging an attractive (red-detuned) optical potential through the condensate excites standing modes that decay into vortices Onofrio et al. 2000 . Of critical importance to experimental studies of vortex dynamics in superfluid BECs is the ability to controllably add vortices with a given charge to a system at a given position. This is particularly important in studies of turbulent BECs, where it is necessary to obtain a quasi-steady state of turbulence Wilson et al. 2013 , which rely on statistical averaging and therefore require initial vortex configurations to be reproducible Barenghi et al. 2014 . Vortices were first deterministically created in a BEC by imprinting a relative phase on a two-component BEC Matthews et al. 1999 . Later developments employed a so-called “spiral” technique where magnetic push coils dragged the condensate around a repulsive potential, stirring a pinned vortex into the bulk of the condensate before unpinning the vortex by ramping off the laser Samson et al. 2016 ; Wilson et al. 2022 . More recently, the advent of Digital Micromirror Devices (DMDs) that can create arbitrary spatio-temporal potentials in a condensate Gauthier et al. 2016 have found use in creating more complex dynamical stirring protocols. This has immediate application to the spiral technique, allowing for multiple beams to imprint several vortices at once Wilson et al. 2022 ; Neely et al. 2024 , as well as the deterministic creation of vortex–antivortex pairs Kwon et al. 2021 , and chiral vortex gases Reeves et al. 2022 . Binary mixtures of BECs have been achieved with an atomic species in different hyperfine states Myatt et al. 1997 ; Hall et al. 1998 ; Matthews et al. 1999 ; Miesner et al. 1999 ; Maddaloni et al. 2000 ; Delannoy et al. 2001 ; Schweikhard et al. 2004 ; Mertes et al. 2007 ; Anderson et al. 2009 ; Tojo et al. 2010 , two isotopes of the same atomic species van Kempen et al. 2002 ; Papp et al. 2008 , and different atomic species Ferrari et al. 2002 ; Modugno et al. 2002 ; Thalhammer et al. 2008 ; McCarron et al. 2011 . The dynamics of the two condensates are coupled by inter-species interactions, and the mixture can be tuned to be either miscible or immiscible Pu and Bigelow 1998 . Mixtures give rise to a wide variety of exotic steady Pu and Bigelow 1998 ; Ho and Shenoy 1996 ; Timmermans 1998 ; Ao and Chui 1998 ; Trippenbach et al. 2000 ; Barankov 2002 ; Van Schaeybroeck 2008 ; Gautam and Angom 2010 ; Gordon and Savage 1998 ; Kim and Lee 2002 and dynamic Li et al. 2019 ; Han and Tsubota 2019 ; He et al. 2019 ; Mithun et al. 2021 ; Wheeler et al. 2021 ; Richaud et al. 2023 ; McMillan et al. 2024 solutions. Of particular interest is the immiscible regime, where the atoms of one component will “infill” the vortex cores of the other component, since these are density-depleted regions Matthews et al. 1999 ; Anderson et al. 2000 . Depending on the system parameters (for example, the strength of immiscibility between the two components and the ratio of atom numbers), the infilling component can trace the fluid flow Zhao et al. 2025 or the position of the vortex cores Doran et al. 2024a , or it can drive new forms of vortex dynamics Richaud et al. 2020 ; Richaud et al. 2021 ; Richaud et al. 2023 , be responsible for vortex shedding Sasaki et al. 2011 ; McMillan et al. 2024 and Onsager vortex clustering Han and Tsubota 2019 , or stabilize multiply-charged vortices Patrick et al. 2023 . In the latter case, multiply-charged vortices, which would typically be unstable to separation in single component systems Adhikari 2019 , are stabilized due to the immiscibility of the infilling component Patrick et al. 2023 . Figure 1: Stills from a simulation of the spiral technique with N_{s}=3 and T_{s}=10^{4} , which results in an infilled vortex with charge q=8 at the origin. Here the beam width w=32 , the trap radius R=100 , and N_{2}=1000 . The first column shows the density of component 1, |\psi_{1}|^{2} ; the second column shows the phase of component 1, \text{Arg}\left(\psi_{1}\right) ; the third column shows the density of component 2, |\psi_{2}|^{2} . For clarity, we only plot the phase of component 1 where |\psi_{1}|^{2}>0.01 , and the trajectory of the spiral beam is added in white to the third column as a guide. The rows correspond to different times, (a) at t=0 , (b) at t=2\times 10^{3} , (c) at t=4\times 10^{3} , (d) at t=6\times 10^{3} , (e) at t=8\times 10^{3} , (f) at t=10^{4}=T_{s} , and (g) at t=1.2\times 10^{4} (in dimensionless variables). A movie of this simulation is available in the Supplemental Material Sup . In this paper, we extend the stirring technique described in Refs. Samson et al. 2016 ; Wilson et al. 2022 to an