An archive of reduced and telluric-corrected CRIRES + L- and M-band spectra with slit-tilt and wavelength calibrations

Thomas Marquart, Alexis Lavail · 2026

Read An archive of reduced and telluric-corrected CRIRES + L- and M-band spectra with slit-tilt and wavelength calibrations by Thomas Marquart, Alexis Lavail (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-24466.txt.

Introduction

Marquart and Lavail present a reprocessed CRIRES+ L and M band archive from September 2021 to March 2025, totaling 11,131 raw frames. CRIRES+ covers Y through M bands, but calibration sources work only to K band. L and M thus lack calibration and slit-tilt measurement. The team fits atmospheric features with the telluric tool viper. Slit tilt comes from A and B frame solutions, and updated inputs feed standard recipes. New wavelength scales come from telluric fits. The archive holds 5,649 calibrated spectra across 156 targets from 68 programmes.

Catalog record

CREATORThomas Marquart, Alexis Lavail
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35259
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.24466

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

An archive of reduced and telluric-corrected CRIRES + L- and M-band spectra with slit-tilt and wavelength calibrations Thomas Marquart, Alexis Lavail Abstract The high-resolution near-infrared spectrograph CRIRES + at ESO VLT covers the Y, J, H, K, L and M bands. The U-Ne and Fabry-Pérot calibration light sources, however, only work up to the K-band, leaving the bands L and M without wavelength calibration, and without a way to measure the inclination of the long slit relative to the detector frame. This has made L/M data awkward to use, reflected both in the low publication fraction and in their absence from ESO’s reduced science products. To remedy this, we present here a uniformly reprocessed archive of all public CRIRES + L-band (2.8–4.2 μ \mu m) and M-band (4.4–5.5 μ \mu m) science observations obtained since the instrument upgrade (September 2021) until March 2025, totalling 11 131 raw frames across 16 wavelength settings. We use the telluric modelling tool viper that fits a model to the plethora of atmospheric absorption features that exist around these wavelengths. To calibrate the slit tilt, we select observations of telluric standards and measure the difference in the viper wavelength solutions between the nodding A and B frames that have the target in the lower and upper half of the slit, respectively. We then update the static inputs to the ESO data reduction system (DRS) with the slit tilt information and reduce the flat-fields and science data with the standard DRS recipes. Subsequently, we derive new wavelength scales for each observation from telluric fits on the spectra themselves, additionally interpolating the solutions for spectra that have no tellurics from the ones that have. The resulting 5649 extracted, calibrated and telluric-fitted AB nod-pair spectra, spanning 156 unique targets from 68 ESO programmes, are served through an interactive web archive at https://www.astro.uu.se/crires-lm that offers data downloads and figures for all datasets that allow an initial judgement of the data quality. In addition, we provide all scripts and code, and the DRS input FITS files with the slit tilt and much improved default wavelength solutions, for use in custom and future data reductions at the repository https://github.com/ivh/CRIRES-LM . 1 Introduction CRIRES + is the upgraded cryogenic high-resolution infrared echelle spectrograph at ESO’s Very Large Telescope ( Dorn et al. 2023 ) . It provides spectra from 0.95 to 5.3 \mu m with a resolving power of R\approx 100\,000 or R\approx 50\,000 (using respectively a 0.2 arcsecond or 0.4 arcsecond wide slit), recording cross-dispersed long-slit spectra on three HAWAII2RG detectors of 2048\times 2048 pixels each with 5–9 echelle orders per chip. While the YJHK bands of CRIRES + are fully reduced and calibrated by the standard cr2res pipeline ( ESO 2023 ) and included in ESO’s Phase 3 data releases, the thermal infrared L-band (2.8–4.2 \mu m) and M-band (4.4–5.5 \mu m) 1 1 1 The CRIRES + M-band settings have wavelength coverage well into the L-band, as can be seen in Fig. 1 . settings have only the flat-field calibration lamp available. Therefore, two instrument properties cannot be calibrated in L/M reductions like in the shorter bands: (1) the slit tilt, i.e. the incline with respect to the detector columns, which is wavelength-dependent and significant (up to several pixels between top and bottom of the slit); and (2) the wavelength calibration. As a result, L/M data are excluded from the Phase 3 archive. This paper describes a bulk reprocessing of all public CRIRES + L/M science data that addresses both issues and additionally provides telluric correction. The reduced spectra are served through an interactive web archive at https://www.astro.uu.se/crires-lm/ . The reduction code is publicly available at https://github.com/ivh/CRIRES-LM . In the following, we describe the methods used, assess the quality of the results and the limitations, and highlight some examples. 2 Data, Methods & Results We query the ESO archive for all CRIRES + science frames with wavelength settings in the L- and M-bands, covering the period from September 2021 (first CRIRES + science operations) through March 2025. The proprietary period for CRIRES + observations is 1 year, so we can only access and reduce public data older than that. This yields 11 131 raw frames from 68 programmes observing 156 distinct targets across 16 wavelength settings (Table 1 ). The observations use the standard CRIRES_spec_obs_AutoNodOnSlit template with ABBA nodding along the slit where the target is moved between two distinct positions (A,B) on the slit. The nodding procedure greatly facilitates the data reduction process throughout the near-infrared. Frames are paired into AB nod pairs by greedy matching within each observing template sequence, producing 5649 pairs across 412 combined observing sequences. An additional 233 flat-field calibration epochs (deep flats with NDIT \geq 10) are retrieved for the same period. Table 1: Wavelength settings and data volume. Setting Range (nm) Frames Pairs L3244 2869–3982 19 16 L3262 2886–4003 972 498 L3302 2923–4050 921 446 L3340 2960–4082 765 399 L3377 2843–4136 726 395 L3412 2873–4177 61 36 L3426 2886–4193 222 101 M4187 3584–5504 76 40 M4211 3381–5535 1118 578 M4266 3427–5604 137 68 M4318 3470–5154 1241 638 M4368 3513–5211 4761 2398 M4416 3552–5264 18 12 M4461 3614–5314 74 39 M4504 3870–5364 12 8 M4519 3435–5370 8 4 Total 11 131 5649 The reduction proceeds in four stages: slit tilt calibration from telluric standard stars (§ 2.1 ), default wavelength scale update (§ 2.2 ), per-observation trace adjustment and extraction (§ 2.4 ), and telluric correction (§ 2.5 ) with wavelength calibration. 2.1 Slit tilt calibration The CRIRES + slit image is not aligned with the detector columns; the resulting tilt is wavelength-dependent and, if uncorrected, causes spectral features to shift in wavelength as a function of position along the slit. For nodding observations, where the spectrum is extracted at two different slit positions, ignoring the tilt introduces a systematic wavelength offset between the A and B nod spectra. In addition, the spectral resolution gets degraded. In the L and M bands, the slit tilt ranges from about +0.01 to -0.09 pixels per spatial pixel, \approx 180 of which make up the full length of the slit (10″on sky). This tilt corresponds to wavelength offsets of several km s -1 over the nod throw (typically \approx 5\arcsec ). Figure 1: Slit tilt measured from the A–B wavelength difference of telluric standard stars, as a function of wavelength. Different symbols denote the three detector chips. Solid and dashed lines show the linear fits for L and M bands (Eqs. 1 and 2 ), which interpolate across the CO 2 gap near 4.2–4.5 \mu m. Grey points are 3 \sigma outliers excluded from the fit. Table 2: Telluric standard stars used for slit tilt and wavelength calibration. 2 2 2 Notes. All standards are hot stars with featureless L/M-band continua, except M4519 where V* S CrA is the only available target; its viper fits are adequate but noisier. Settings Star Sp. type Slit L3244–L3302, L3412, L3426 \alpha Eri B6 V 0 \aas@@fstack{\prime\prime} 2 L3340 HD 153426 O9 II 0 \aas@@fstack{\prime\prime} 4 L3377 \theta Aql B9.5 III 0 \aas@@fstack{\prime\prime} 4 M4187, M4266 HR 7950 B 0 \aas@@fstack{\prime\prime} 2 M4211 o Hya B9 III 0 \aas@@fstack{\prime\prime} 2 M4318 \theta Aql B9.5 III 0 \aas@@fstack{\prime\prime} 4 M4368 \beta

Read the complete text