A robust a posteriori error estimator for the Oseen problem

Muhammad Afzal, Naveed Ahmed, Volker John · 2026

Read A robust a posteriori error estimator for the Oseen problem by Muhammad Afzal, Naveed Ahmed, Volker John (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-23453.txt.

Introduction

Afzal, Ahmed, and John derive a residual-based error estimator for the Oseen equations, a linearized model of steady fluid flow, in the regime where convection dominates diffusion. The estimator targets the same error measure used in the method's prior analysis, and its robustness is proved under stated assumptions and backed by numerical tests. The authors close by discussing how the estimator extends to the full steady Navier-Stokes equations.

Catalog record

CREATORMuhammad Afzal, Naveed Ahmed, Volker John
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69728
LICENSEhttp://creativecommons.org/publicdomain/zero/1.0/
RIGHTSCC0
SOURCEarXiv

Source: https://arxiv.org/abs/2604.23453

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A robust a posteriori error estimator for the Oseen problem Muhammad Afzal, Naveed Ahmed, Volker John Abstract A residual-based a posteriori error estimator is proposed for the incompressible Oseen problem in the convection-dominated regime. The SUPG/PSPG/grad-div stabilized finite element method is used as discretization. The error estimator estimates the global error in a norm that is used in the a priori error analysis of the method. Based on several hypotheses concerning the error and interpolation errors, the robustness of the estimator in the convection-dominated regime is proved. Numerical studies support the analytic results. Finally, the extension of the a posteriori error estimator to the steady-state Navier–Stokes equations is discussed. Keywords Oseen problem \cdot SUPG/PSPG/grad-div stabilized method \cdot error in SUPG/PSPG/grad-div norm \cdot robust residual-based a posteriori error estimator 1 Introduction This paper considers the stationary incompressible Oseen problem, already with dimensionless quantities, for the velocity \boldsymbol{u}\ :\ \Omega\to\mathbb{R}^{d} and the pressure p\ :\ \Omega\to\mathbb{R} that is of the form \begin{array}[]{rcll}-\nu\,\Delta\boldsymbol{u}+(\boldsymbol{b}\!\cdot\!\nabla)\boldsymbol{u}+\sigma\boldsymbol{u}+\nabla p&=&\boldsymbol{f}&\mbox{in }\Omega,\\ \nabla\cdot\boldsymbol{u}&=&0&\mbox{in }\Omega,\\ \boldsymbol{u}&=&\boldsymbol{0}&\text{on }\Gamma_{\mathrm{D}},\\ (\nu\nabla\boldsymbol{u}-p\mathbb{I})\cdot\boldsymbol{n}&=&\boldsymbol{g}&\mbox{on }\Gamma_{\mathrm{N}},\end{array} (1) where \Omega\subset\mathbb{R}^{d} , d\in\{2,3\} , is a polygonal (polyhedral) domain with Lipschitz boundary \partial\Omega=\Gamma_{\mathrm{D}}\cup\Gamma_{\mathrm{N}} , \Gamma_{\mathrm{D}}\cap\Gamma_{\mathrm{N}}=\emptyset . The unit outer normal vector at \partial\Omega is denoted by \boldsymbol{n} and \mathbb{I} is the unit tensor. The Dirichlet part \Gamma_{\mathrm{D}} has positive (d-1) -dimensional measure and contains the inflow boundary \partial\Omega^{-}:=\left\{\boldsymbol{x}\in\partial\Omega\ :\ \ \boldsymbol{b}(\boldsymbol{x})\cdot\boldsymbol{n}(\boldsymbol{x})<0\right\}\subset\Gamma_{\mathrm{D}}. (2) Given data comprise the (kinematic) viscosity 0<\nu\ll 1 , the convection field \boldsymbol{b}\in W^{1,\infty}(\Omega)^{d}={\boldsymbol{W}}^{1,\infty}(\Omega) , which is assumed to be divergence-free \nabla\cdot\boldsymbol{b}=0 a.e. in \Omega , a scalar reaction field \sigma\in L^{\infty}(\Omega) with \sigma\geq\sigma_{0}\geq 0 , \sigma_{0}\in\mathbb{R} , a.e. in \Omega , acting componentwise on \boldsymbol{u} , a body force \boldsymbol{f}\in L^{2}(\Omega)^{d}=\boldsymbol{L}^{2}(\Omega) , and boundary data \boldsymbol{g}\in L^{2}(\Gamma_{\mathrm{N}})^{d}=\boldsymbol{L}^{2}(\Gamma_{\mathrm{N}}) . The consideration of homogeneous data at the Dirichlet boundary is just for the sake of simplifying the presentation of the numerical analysis. Inhomogeneous Dirichlet boundary data could be incorporated with a standard lifting argument. Oseen problems are standard model problems in numerical analysis. They can be considered as a linearized incompressible Navier–Stokes problem. In practice, Oseen-type problems have to be solved in each step of certain iterative methods in each time step for time-dependent Navier–Stokes problems, where \sigma is proportional to the inverse of the length of the time step. A situation of much interest in practice is the case that \nu\ll\|\boldsymbol{b}\|_{L^{\infty}(\Omega)} , the so-called convection-dominated case. In this case, where the convective transport dominates the viscous one, the solution might possess very small scales, e.g., layers, that cannot be resolved on affordable grids. Thus, from the numerical point of view, one faces a multiscale problem. It is well known that the numerical simulation of multiscale problems requires to use special numerical methods to perform stable simulations. There are various proposals of stabilized finite element methods for Oseen problems, which include the streamline-upwind Petrov–Galerkin (SUPG)/pressure-stabilization Petrov–Galerkin (PSPG) method, e.g., see [ 15 , 24 , 12 ] for some of the early applications of this method to incompressible flow problems, the local projection stabilization (LPS) method, e.g. see [ 7 ] for its application to the Oseen problem, or the continuous interior penalty (CIP) method, studied for the Oseen problem in [ 8 ] . The most popular one is probably the first method. Another stabilization, which is popular for finite element methods applied to all kinds of incompressible flow problems, is the grad-div stabilization from [ 13 ] . Originally, this stabilization was proposed to improve the local mass conservation of finite element solutions. But it has been found that it also stabilizes dominant convection, e.g., see [ 11 , 14 ] . This paper considers SUPG/PSPG/grad-div stabilized finite element methods for the Oseen problem. With this method, both inf-sup stable pairs of velocity-pressure finite element spaces and equal order pairs can be used. The a priori error analysis of this method, see [ 25 ] , aims to prove a so-called convection-robust (or semi-robust) estimate. That is, the constant in the estimate does not blow up if \nu\to 0 . To achieve such an estimate, one has to use an appropriate norm, which contains contributions from the stabilization, compare ( 9 ) and ( 10 ) below. The goals of an a posteriori error analysis are twofold. First, a derived error estimator should provide information about the global error in some norm. Second, the local contributions of the estimator should control the construction of adaptively refined grids. There are several types of a posteriori error estimators, e.g., residual-based estimators, see [ 28 ] , or estimators that are based on the solution of local problems, see [ 3 ] . In particular, estimators for the Oseen or the steady-state Navier–Stokes equations can be found, e.g., in [ 2 , 6 , 9 , 4 , 5 ] . As discussed in [ 16 ] , none of these estimators leads to convection-robust estimates. More recently, in [ 22 ] , a robust residual-based estimator for a \boldsymbol{H}(\mathrm{div}) -conforming discontinuous Galerkin (DG) finite element method for the Oseen equations is presented and analyzed. This method contains only the standard stabilization term of DG methods. The robust error bound is derived with respect to a norm that has as one part a dual seminorm, which can be only approximated, but not computed. This paper can be considered as an extension of [ 19 ] , where a robust residual-based error estimator for convection-dominated scalar equations was proposed. Like in [ 19 ] , one of the goals is that the estimator should be for the same norm for which the a priori finite element error analysis of the method is performed. And again like in [ 19 ] , the derivation of the estimator is based on some hypotheses concerning the relation of interpolation errors and the error of the finite element solution in the stabilized norm. Some of the hypotheses are analogs to those from [ 19 ] , but some new hypotheses are needed, in particular coming from the fact that the second component of the solution is the pressure field. With this approach, a residual-based a posteriori error estimator is derived and an estimate for the global error, in a norm that is used in the a priori error analysis, is proved. Numerical studies support the robustness of the proposed estimator. In addition, the satisfaction of the hypotheses is studied. Finally, an extension of the proposed estimator to the steady-state incompressible Navier–Stokes problem is presented and illustrated with a brief numerical study. The paper is organized as follows. Section 2 introduces the SUPG/PSPG/grad-div stabilized finite element method for the Oseen problem, together with all necessary notations. The residual-based a posteriori error estimator is derived and discussed in Section 3 . Section 4 contains the numerical studies for the Oseen problem. The discussion of an extension of the error estimator to the steady-state Navier–Stokes problem is presented in Section 5 . 2 Notations, Preliminaries, Weak Formulation, the SUPG/PSPG/grad-div Stabilized Finite Element Method This paper uses standard notations for Lebesgue and Sobolev spaces and their norms. Vector-valued functions and spaces are denoted with bold-faced symbols. Let \omega be a domain or part of a manifold, then the inner product in L^{2}(\omega) or \boldsymbol{L}^{2}(\omega) is denoted by (\cdot,\cdot)_{\omega} .

Read the complete text