Moth’s eye-inspired perfectly vertical subwavelength grating coupler for silicon photonics
Ivan A. Kazakov, Ilona Popova, Arkady Shipulin · 2026
Read Moth’s eye-inspired perfectly vertical subwavelength grating coupler for silicon photonics by Ivan A. Kazakov, Ilona Popova, Arkady Shipulin (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-23394.txt.
Introduction
Kazakov, Popova, and Shipulin propose a moth-eye-inspired vertical grating coupler for silicon photonics with an anisotropic grating stripe directing light to one side. The design needs only a single etching step and couples vertical light efficiently, suiting integration of sources such as VCSELs on chip. Built for the SOI platform at 1550 nm, simulation gives 41 percent in-coupling, unidirectionality over 10 dB, and 50 nm bandwidth at 1 dB. Experiments confirm unidirectionality at 12.80 dB with insertion loss of about 8 dB near 1528 nm.
Catalog record
| CREATOR | Ivan A. Kazakov, Ilona Popova, Arkady Shipulin |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 16119 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.23394
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Moth’s eye-inspired perfectly vertical subwavelength grating coupler for silicon photonics Ivan A. Kazakov, Ilona Popova, Arkady Shipulin Abstract We propose a novel bio-inspired design principle for the perfectly vertical grating coupler. The main idea of our design is to introduce anisotropy to the grating stripe to direct the light to one side of the grating. This grating design is easy to manufacture, only requiring a single etching step, and it is designed to efficiently couple vertically incident light. This makes it a good candidate for heterogeneous integration of light sources, especially VCSELs, on chip for applications in classical and quantum communications, LIDARs, sensing systems, and others. The grating coupler was designed for the SOI material platform with a central wavelength of 1550 nm. We obtained the efficiency of in-coupling from the SMF-28 fiber of 41% at vertical incidence and unidirectionality of over 10 dB, with a bandwidth of 50 nm at a 1 dB level in simulation. Experimental measurements confirmed unidirectionality, with observed unidirectionality of 12.80 ± 0.02 12.80\pm 0.02 dB and a single-coupler insertion loss of 8.35 ± 0.02 8.35\pm 0.02 dB around 1528 nm. Keywords: silicon photonics, grating couplers, vertical coupling, anisotropic coupling, subwavelength structures 1 Introduction The problem of coupling light to photonic integrated circuits (PICs) is essential for the integrated photonics technology. There are various ways of coupling light to PICs, which can be divided into two main branches: edge coupling (EC) and grating coupling (GC). Each of them have their own pros and cons, and are used in different applications [ 8 , 2 , 11 ] . Currently, the most popular are edge couplers (ECs) due to their wide bandwidth, low loss, polarization insensitivity, and simple packaging. But there are a set of problems that can not be solved with them; for example, grating couplers (GCs) are essential for phased array antennas, wafer-level testing, and some experimental measurements. The main problem we try to solve with our design is the heterogeneous integration of VCSELs with PICs. VCSELs are the most energy- and cost-efficient light sources, and their integration to silicon PICs will be preferable for a lot of applications, such as LiDARs, classical and quantum communications, and sensing. Currently, there are several ways and attempts for coupling VCSELs to silicon on insulator (SOI) PICs [ 7 ] . Figure 1: (a) Side view of the proposed grating, which includes a sub-wavelength grating (SWG) region. (b) Top view of the proposed grating, showing the actual geometry of the grating, (c) top view showing the effective grating geometry, with n_{SWG} obtained from eq. ( 4 ) We suggest a new approach for designing a perfectly vertical grating coupler based on several assumptions: the grating should be made in one etching step for fabrication simplicity, be unidirectional to avoid problems related to interference, which appear in bidirectional couplers, and have high efficiency of coupling vertically incident light. An important concept used in our approach is the subwavelength grating (SWG), which allows to engineer the effective refractive index of the grating stripes, thus extending the variety of refractive indices available for design [ 3 , 1 ] . For our GC, we have chosen the 220 nm SOI material platform as the most popular one for creating SWG structures due to high index contrast and the possibility of manufacturing devices with high resolution. SWG is a periodic structure with period \Lambda made of two materials with different refractive indices, in our case n_{\textrm{Si}} and n_{\textrm{SiO${}_{2}$}} . The effective refractive index of a subwavelength grating can be calculated using the effective medium theory (EMT), the idea of which is to decompose the effective index into a Taylor series with respect to the small parameter, which is period to wavelength ratio R (Eq. 1 ). R=\frac{n_{eff}\Lambda}{\lambda} (1) Here, n_{\mathrm{eff}} denotes the effective index of the uniform waveguide, and in our case, it is equal to n_{\textrm{Si}} because the y-dimension of our device is much larger than the wavelength. If R<<1 , which corresponds to the deep-subwavelength regime, SWG can be described by the zero-order effective medium theory (EMT), developed by the Rytov [ 10 ] . Formulas for TE and TM polarisation are the following: \displaystyle\frac{1}{n^{(0)}_{TE}}=\left(\frac{(1-f_{y})}{n_{SiO_{2}}^{2}}+\frac{f_{y}}{n_{Si}^{2}}\right)^{\frac{1}{2}} (2) \displaystyle n_{TM}^{(0)}=\left(n_{Si}^{2}f_{y}+n_{SiO_{2}}^{2}(1-f_{y})\right)^{\frac{1}{2}} (3) The condition R<<1 is unachievable with current technology, so for cases where R<1 , a second-order approximation can be used [ 6 , 5 ] . This approximation is in good coincidence with experimental results. Equations are presented below: \displaystyle n^{(2)}_{TE}=n^{(0)}_{TE}\left(1+\frac{\pi^{2}}{3}R^{2}f_{y}^{2}(1-f_{y})^{2}(n_{SiO_{2}}^{2}-n_{Si}^{2})^{2}\left(\frac{n_{TM}^{(0)}}{n_{effTE}}\right)^{2}\left(\frac{n_{TE}^{(0)}}{n_{SiO_{2}}n_{Si}}\right)^{4}\right)^{\frac{1}{2}} (4) \displaystyle n^{(2)}_{TM}=n^{(0)}_{TM}\left(1+\frac{\pi^{2}}{3}R^{2}f_{y}^{2}(1-f_{y})^{2}\left(\frac{n_{SiO_{2}}^{2}-n_{Si}^{2}}{n_{effTMn_{TM}^{(0)}}}\right)^{2}\right)^{\frac{1}{2}} (5) Figure 2: Approximated refractive index of the sub-wavelength grating for different fill-factors, calculated by EMT with zeroth-order and second-order approximation ( \Lambda=400 nm, \lambda=1550 nm). The behavior of zeroth- and second-order effective indices as a function of fill-factor f for the period \Lambda=400 nm is shown in Figure 2 . Sub-wavelength gratings can be used for refractive index engineering, and they allow to achieve any refractive index value between n_{\textrm{SiO${}_{2}$}} and n_{\textrm{Si}} by choosing the appropriate value of fill-factor f . Effective index values retrieved from equations ( 4 ) and ( 5 ) can be used for 2D-FDTD simulations in the plane of incidence. Our design idea is based on breaking the symmetry of the grating stripe in order to break the symmetry of light propagation. Guiding light to one side is provided by the fact that one side of the grating stripe is flat and reflective, and the other side is covered with ’teeth’ which act as an antireflective surface, so-called Moth’s Eye metasurface [ 4 ] . Therefore, light is absorbed from the patterned side of the stripe, while it is on the surface and therefore guided to this side. From another point of view, the patterned region is a sub-wavelength grating, which has its own effective refractive index; this approach allows for avoiding multi-level etching by patterning the waveguide in the transverse direction to create metamaterials with different effective refractive indices. Further, we explain our simulation setup and numerical simulation and optimization procedure, and finally cover the question of comparison of our solution with others and ways of further development of our approach for GC design. 2 Methods To calculate coupling efficiency, we perform three-dimensional finite-difference time-domain (3D-FDTD) simulations using the open-source software MEEP [ 9 ] . The simulation setup is shown schematically in Figure 3 . The grating is illuminated by a short pulse of light of the fundamental mode of a standard single-mode optical fiber. Simulation was run until the electric field had sufficiently decayed. After the simulation is finished, we calculate the Fourier transform of the electric field. Then, the Fourier-transformed electric field at the fiber cross-section is decomposed into fiber eigenmodes E_{n} as: E^{fiber}(x,y,\omega)=\sum_{n}\alpha_{n}^{+}(\omega)E_{n}^{+}(x,y,\omega)+\alpha_{n}^{-}(\omega)E_{n}^{-}(x,y,\omega) (6) And the electric field at the waveguide cross-section is decomposed into waveguide eigenmodes \mathcal{E}_{n} as: E^{wg}(y,z,\omega)=\sum_{n}\beta_{n}^{+}(\omega)\mathcal{E}_{n}^{+}(y,z,\omega)+\beta_{n}^{-}(\omega)\mathcal{E}_{n}^{-}(y,z,\omega) (7) where the ”+” and ”-” superscripts correspond to forward- and backward-traveling waves, respectively, and n=0 corresponds to the fundamental E_{y} -polarized (TM) mode of both fiber and waveguide. The efficiency as a function of frequency is then calculated as: \eta(\omega)=\frac{|\beta_{0}^{+}(\omega)|^{2}}{|\alpha_{0}^{+}(\omega)|^{2}} (8) Using this definition of efficiency, i.e., separating forward- and backward-traveling waves, makes sure that light reflected from the grating back into the fiber does not affect the numerical results. Figure 3: Cross section