Solving Einstein’s Equation Numerically on Manifolds with Non-Orientable Spatial Slices
Fan Zhang a,b and Lee Lindblom c · 2026
Read Solving Einstein’s Equation Numerically on Manifolds with Non-Orientable Spatial Slices by Fan Zhang a,b and Lee Lindblom c (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-22954.txt.
Introduction
Zhang and Lindblom construct numerical solutions to Einstein's equation for simple cosmological models on manifolds with compact non-orientable spatial slices. Examples span positive, negative, and zero spatial scalar curvature. One example looks locally identical to a homogeneous Friedman cosmological model, while others carry large inhomogeneities. Together the examples probe the strengths and limits of the numerical methods and test the code that implements them. The work tests methods as much as models, since the same code must cope with each new shape.
Catalog record
| CREATOR | Fan Zhang a,b and Lee Lindblom c |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 53905 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.22954
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Solving Einstein’s Equation Numerically on Manifolds with Non-Orientable Spatial Slices Fan Zhang a,b and Lee Lindblom c Abstract This paper presents solutions to Einstein’s equation—and the numerical methods used to construct them—that describe simple cosmological models on manifolds with compact non-orientable spatial slices. These solutions have been constructed on a selection of manifolds having positive, negative, and vanishing spatial scalar curvatures. One example is shown to be indistinguishable locally from a homogeneous Friedman cosmological model, others are constructed with significant inhomogeneities. Together these examples are used to explore the strengths and the limitations of the numerical methods used in this study, and to test the code used to implement them. I Introduction Einstein’s equation determines the geometry of space-time given initial data for the matter fields (and any gravitational waves) that may be present on a spacelike surface. This equation does not, however, determine the topology of that initial spatial slice. That topology must be specified independently to insure the solutions faithfully model a particular physical problem. Solutions to Einstein’s equation have been studied on manifolds with a small number of simple topologies, e.g., with initial surfaces having S^{3} , T^{3} , or S^{2}\times S^{1} topologies, etc. But little is known about solutions on manifolds from most of the infinite collection of possible topologies. Current observations do not determine or even constrain the possible topology of our universe. Therefore it seems reasonable to explore the properties of solutions on manifolds having a wide variety of possible topologies. To that end robust numerical methods have been developed—and implemented in an efficient computer code—that facilitate the study of solutions to Einstein’s equations on manifolds with arbitrary spatial topologies Lindblom2013 ; Lindblom2014 ; Lindblom2015 ; Zhang2022 . This study extends that work by constructing and analyzing solutions to Einstein’s equations on manifolds with non-orientable spatial slices. Space-times with non-orientable topologies are often dismissed as nonphysical because analysis shows that only certain types of global spinor structures are allowed on such manifolds Geroch1968 ; Geroch1970 ; Grinstein1987 . These arguments probably rule out the possibility that the observable part of our universe is time or space non-orientable. However, they do not rule out the possibility that spatial slices could become non-orientable when extended beyond our cosmic horizon. This study has three primary goals. The first is to demonstrate that it is possible to find solutions to Einstein’s equation on manifolds with non-orientable topologies. The second is to explore whether homogeneous solutions on non-orientable manifolds can be distinguished in some way locally from the standard homogeneous Friedman cosmological models. The third goal is to explore and evaluate the strengths and limitations of the numerical methods that have been developed to solve Einstein’s equation on manifolds with arbitrary spatial topologies. For example, the code developed to solve the covariant representation of the Einstein evolution equations (needed for non-trivial topologies) has only been tested previously by evolving solutions with small amplitude gravitational wave perturbations on a manifold with S^{3} spatial topology Lindblom2014 . In this study the code is tested more robustly by evolving the fully nonlinear equations long enough to expand the spatial volumes of the solutions by a factor of ten. The remainder of this paper is organized as follows. The simple non-orientable manifolds used in this study are described in Sec. II . This section describes the multi-cube representations of these manifolds, including the construction of the reference metrics needed to define their differentiable structures. This section also demonstrates that the manifolds included in this study satisfy the topological conditions needed to admit global Dirac and Majorana (but not Weyl) spinor structures. Section III describes the methods used to construct simple initial data that satisfy the Einstein constraint equations on these manifolds. These initial data were found by solving a version of the Einstein constraints for a spacetime devoid of matter except for a cosmological constant. The value of this constant is chosen in each example to produce a geometry with a homogeneous spatial Ricci scalar curvature. The quality of these numerical solutions are evaluated, and the convergence of the numerical methods used to solve the elliptic constraint equations is illustrated. Section IV describes and analyzes the numerical evolution of these initial data which produce simple non-orientable cosmological models. One of these models is shown to be indistinguishable locally from one of the standard homogeneous Friedman cosmological models. The other examples have significant inhomogeneities that grow rapidly from inhomogeneities present in the initial data for these cases. Together these examples provide an opportunity to evaluate the strengths and limitations of the numerical methods and their implementation in the computer code used to solve the hyperbolic Einstein evolution equations. The covariant symmetric hyperbolic representation of the Einstein evolution equations used in this study is described briefly in Appendix A . Section V presents a summary and discussion of the results of this study, including ideas that could be pursued to address some open questions. II Simple Non-Orientable Manifolds This section describes the simple non-orientable manifolds on which solutions to Einstein’s equation have been constructed for this study. Each of these four-dimensional manifolds has the topology of a globally hyperbolic spacetime, i.e. its topology has the form \mathbb{R}\times\Sigma , where \Sigma is a compact non-orientable three-dimensional manifold without boundary. This study uses multi-cube representations of the three-manifolds, \Sigma , to facilitate the numerical analysis. These multi-cube representations (introduced in Ref. Lindblom2013 ) are collections of non-overlapping cubic regions which serve as coordinate patches that cover the manifold. Figure 1 illustrates the multi-cube structures for three of the manifolds used in this study: P^{2}\times S^{1} , P^{2}\#P^{2}\times S^{1} and P^{2}\#T^{2}\times S^{1} . Each of these manifolds is the Cartesian product of a non-orientable compact two-manifold with the circle, S^{1} . P^{2} represents the two-dimensional real projective plane and T^{2} the two-torus, while \times indicates a Cartesian product and \# a connected sum. 1 1 1 The connected sum, M_{1}\#M_{2} , of two m -dimensional manifolds is formed by deleting an open ball from each manifold and gluing together the resulting boundary spheres. These manifolds are represented as a collection of non-overlapping cubic regions whose faces are identified in the prescribed way. Figure 1 illustrates the +z faces of the cubic regions representing these manifolds, including the way the x and y faces are identified. The +z and -z face of each of these cubic region is identified to implement the Cartesian product with S^{1} . For example, the figure on the left in Fig. 1 illustrate the +z faces of the five cubic regions used to represent P^{2}\times S^{1} . The solid (black) lines in this figure represent the identifications of the x and y faces of the boundaries between neighboring cubes (which are distorted in this figure to illustrate the connections between them), while the oriented dashed (red or blue) lines represent the identifications of the outer faces in this figure. The center and right figures illustrate the four cubic regions used to represent P^{2}\#P^{2}\times S^{1} and P^{2}\#T^{2}\times S^{1} respectively. Figure 1: This figure illustrates the +z faces of the multi-cube blocks compact non-orientable three-manifolds used in this study: (from left to right) P^{2}\times S^{1} , P^{2}\#P^{2}\times S^{1} , and P^{2}\#T^{2}\times S^{1} . The solid (black)