Positivity-Preserving and Entropy-Stable Oscillation-Eliminating DGSEM for the Compressible Euler Equations on Curvilinear Meshes with Adaptive Mesh Refinement Journal: Journal of Computational Physics
Jieling Yang, Guosheng Fu · 2026
Read Positivity-Preserving and Entropy-Stable Oscillation-Eliminating DGSEM for the Compressible Euler Equations on Curvilinear Meshes with Adaptive Mesh Refinement Journal: Journal of Computational Physics by Jieling Yang, Guosheng Fu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-21600.txt.
Introduction
Jielin Yang and Guosheng Fu extend an entropy-stable oscillation-eliminating discontinuous Galerkin method to adaptive mesh refinement grids with nonconforming interfaces. Their flux-interpolation coupling joins coarse and fine mesh sides before blending, conserves totals, and obeys a semi-discrete entropy inequality. A mortar flux stays accurate on smooth flows but can violate entropy. Both couplings keep density and pressure above zero, and tests on flows with shocks show toughness matching the mortar approach.
Catalog record
| CREATOR | Jieling Yang, Guosheng Fu |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 92313 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.21600
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Positivity-Preserving and Entropy-Stable Oscillation-Eliminating DGSEM for the Compressible Euler Equations on Curvilinear Meshes with Adaptive Mesh Refinement Journal: Journal of Computational Physics Jieling Yang, Guosheng Fu Abstract We extend the entropy-stable oscillation-eliminating discontinuous Galerkin spectral element method (ES-OEDG) on curvilinear meshes [ 28 ] to adaptive mesh refinement (AMR) grids with nonconforming interfaces. The formulation is developed for two-dimensional curvilinear quadrilateral meshes under a 2:1 refinement constraint, allowing a single level of hanging nodes. The elementwise volume discretization and geometric mapping are retained, while the oscillation elimination procedure and interface coupling are adapted to accommodate nonconforming interfaces. A central contribution of this work is the design and analysis of numerical fluxes for nonconforming interfaces. We first construct an entropy-stable flux that guarantees global conservation and a semi-discrete entropy inequality. We show, however, that for polynomial degree N ≥ 2 N\geq 2 , the presence of negative entries in the nonconforming interpolation operators leads to a loss of formal high-order consistency. To address this limitation, we further propose a mortar-based flux that preserves high-order accuracy by performing interpolation at the solution level and evaluating standard two-point fluxes on the fine-side mortars, at the expense of losing provable entropy stability. In addition, we develop a rigorous extension of the Zhang–Shu positivity-preserving framework to curvilinear AMR meshes. We prove that, under forward Euler time stepping and a suitable CFL condition, the scheme—using either the entropy-stable or the mortar-based flux—preserves positivity of the cell-average density and pressure. Combined with the Zhang–Shu limiter, this yields a fully discrete scheme that maintains admissibility at all nodal points. We further incorporate adaptive mesh refinement based on shock indicators, together with a conservative and positivity-preserving data transfer procedure between successive AMR meshes, leading to an overall algorithm that is both robust and efficient. Numerical experiments on both Cartesian and curvilinear AMR grids demonstrate the high-order accuracy of the mortar-based fluxes, as well as the robustness, effectiveness, and positivity-preserving properties of the proposed methods. 1 Introduction High-order entropy-stable discontinuous Galerkin (DG) methods on curvilinear meshes [ 13 , 4 , 9 , 6 ] provide a robust and accurate framework for compressible flow simulations involving complex geometries. In our previous work [ 28 ] , we developed an entropy-stable oscillation-eliminating discontinuous Galerkin spectral element method (ES-OEDG) for the compressible Euler equations on conforming curvilinear quadrilateral meshes, combining entropy-stable discretization with an oscillation-eliminating (OE) procedure to enhance robustness in the presence of strong shocks. The extension of entropy-stable high-order discretizations to nonconforming meshes arising from adaptive refinement has been extensively studied. Friedrich et al. [ 14 ] developed entropy-stable h/p nonconforming DG discretizations on Cartesian meshes, demonstrating that standard mortar-based interface treatments must be modified to ensure entropy stability for nonlinear systems. These ideas have been extended to curvilinear grids, where interface interpolation, metric consistency, and discrete geometric conservation laws are essential for maintaining stability and conservation properties [ 10 ] . More recently, Chan and co-authors developed entropy-stable formulations on nonconforming meshes using projection and mortar-based interface treatments, including efficient constructions for both Lobatto and Gauss collocation schemes [ 5 ] . Collectively, these works highlight that the design of interface coupling operators is the central challenge in extending entropy-stable schemes to nonconforming and adaptive meshes. Despite these advances, a rigorous extension of positivity-preserving techniques for entropy-stable high-order schemes to adaptive mesh refinement (AMR) with nonconforming interfaces is still lacking. In particular, the interaction between entropy-stable interface coupling and positivity-preserving mechanisms on curvilinear AMR meshes remains largely unexplored. In this work, we extend the conforming-curvilinear ES-OEDG framework of [ 28 ] to AMR meshes with nonconforming interfaces. We focus on two-dimensional quadrilateral meshes under a 2:1 refinement constraint, allowing a single level of hanging nodes. The elementwise DG discretization is retained from the conforming-curvilinear formulation, and only the nonconforming interface coupling is modified. Within this framework, we first develop an entropy-stable interface treatment for hanging interfaces that preserves primary conservation and satisfies a semi-discrete entropy inequality. We show, however, that for polynomial degree N\geq 2 , the presence of negative entries in the nonconforming interpolation operators leads to a loss of formal high-order consistency, resulting in at most first-order accuracy of the flux. To address this limitation, we further propose a classical mortar-based interface flux that preserves high-order accuracy and positivity by performing interpolation at the solution level and evaluating standard two-point fluxes on the fine-side mortars, at the expense of losing provable entropy stability. This reveals a fundamental trade-off between provable entropy stability and high-order consistency for nonconforming interface coupling. Another central result of this work is a rigorous extension of the Zhang–Shu positivity-preserving framework to curvilinear nonconforming meshes. We prove that, under forward Euler time stepping and a suitable CFL-type condition, the scheme—using either the entropy-stable flux or the mortar-based flux—preserves positivity of cell-average density and pressure. This, in turn, enables positivity of the fully discrete solution through the application of a Zhang–Shu scaling limiter. In addition, we introduce a conservative and positivity-preserving data transfer procedure between successive AMR meshes, ensuring that the overall AMR algorithm maintains admissibility. The remainder of the paper is organized as follows. In Section 2 , we briefly review the entropy-stable DG formulation for the Euler equations on curvilinear quadrilateral meshes developed in [ 28 ] . Section 3 presents the extension of the scheme to nonconforming meshes, including the construction of entropy-stable interface fluxes and the analysis of conservation, entropy stability, and positivity preservation. Section 4 introduces the mortar-based flux and discusses its high-order accuracy and positivity-preserving properties. Section 5 describes additional algorithmic components, including oscillation elimination on nonconforming meshes, adaptive mesh refinement with shock-indicator-based refinement and coarsening, and a conservative and positivity-preserving data transfer procedure. Numerical experiments demonstrating the accuracy, robustness, and positivity-preserving properties of the proposed methods are presented in Section 6 . Finally, concluding remarks are given in Section 7 . 2 Entropy-stable DGSEM on conforming curvilinear quadrilateral meshes In this section, we briefly summarize the entropy-stable DGSEM on conforming curvilinear quadrilateral meshes developed in [ 28 ] , which serves as the baseline scheme for the AMR extension proposed in this work. We retain the notation of [ 28 ] whenever possible. Since the novelty of the present paper lies in the treatment of nonconforming interfaces, we restrict the discussion here to the ingredients needed later for the AMR formulation and its analysis. 2.1 Euler equations and entropy variables We consider the two-dimensional compressible Euler equations in conservative form, \partial_{t}\bm{U}+\partial_{x}\bm{f}(\bm{U})+\partial_{y}\bm{g}(\bm{U})=0, (1) where the conservative variable is \bm{U}=(\rho,\rho u,\rho v,E)^{T}. (2) Here, \rho denotes the density, \bm{u}=(u,v)^{T} the velocity, and E=\rho e+\frac{1}{2}\rho|\bm{u}|^{2} (3) the total energy, with e the specific internal energy. The Cartesian fluxes are given by \bm{f}(\bm{U})=(\rho u,\rho u^{2}+p,\rho uv,(E+p)u)^{T},\qquad\bm{g}(\bm{U})=(\rho v,\rho uv,\rho v^{2}+p,(E+p)v)^{T}. Throughout this work, we assume an ideal-gas equation of state, p=(\gamma-1)\rho e,\qquad\gamma=1.4. (4) For entropy analysis, we adopt the mathematical entropy \eta(\bm{U})=-\frac{\rho s}{\gamma-1},\qquad s=\log(p\rho^{-\gamma}), (5) with associated entropy flux \bm{q}(\bm{U})=-\frac{\rho s\,\bm{u}}{\gamma-1}. (6) The corresponding entropy variables are \bm{V}=\frac{\partial\eta}{\partial\bm{U}}=\begin{pmatrix}\dfrac{\gamma-s}{\gamma-1}-\dfrac{|\bm{u}|^{2}}{2c^{2}}\\[3.44444pt] u/c^{2}\\[1.72218pt] v/c^{2}\\[1.72218pt] -1/c^{2}\end{pmatrix},\qquad c=\sqrt{\gamma p/\rho}, (7) and the entropy potential fluxes are \bm{\psi}=(\bm{\psi}^{f},\bm{\psi}^{g})=\rho\bm{u}. (8) 2.2 Curvilinear formulation Let \Omega_{h}=\{\Omega_{e}\}_{e=1}^{N_{e}} be a conforming partition of the physical domain into curved quadrilateral elements. Each element \Omega_{e} is obtained from the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} through a smooth mapping