Stabilization of a non-superconducting, orthorhombic phase by over-hydrogenating LaFeSiH

M. F. Hansen, C. Lepoittevin, J.-B. Vaney, P. Boullay, V. Nassif, A. Sulpice, H. Mayaffre, M.-H. Julien, S. Tencé, P. Toulemonde · 2026

Read Stabilization of a non-superconducting, orthorhombic phase by over-hydrogenating LaFeSiH by M. F. Hansen, C. Lepoittevin, J.-B. Vaney, P. Boullay, V. Nassif, A. Sulpice, H. Mayaffre, M.-H. Julien, S. Tencé, P. Toulemonde (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-20716.txt.

Introduction

Hansen and nine colleagues show that decay of hydrogen precursors enables over-hydrogenation of LaFeSi. Using anthracene, they make tetragonal superconducting LaFeSiH, while ammonia borane yields an over-hydrogenated phase. Excess hydrogen, x about three-fifths, implies a second hydrogen site in LaFeSiH1.6, located by neutron diffraction. Unlike metallic LaFeSi and superconducting LaFeSiH, that phase behaves like a semiconductor. Upon hydrogen release near 100 degrees Celsius, it transforms into tetragonal superconducting LaFeSiH1+delta. Those results show the freedom of the LaFeSiX family and open a high hydrogen-doping regime.

Catalog record

CREATORM. F. Hansen, C. Lepoittevin, J.-B. Vaney, P. Boullay, V. Nassif, A. Sulpice, H. Mayaffre, M.-H. Julien, S. Tencé, P. Toulemonde
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35204
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.20716

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Stabilization of a non-superconducting, orthorhombic phase by over-hydrogenating LaFeSiH M. F. Hansen, C. Lepoittevin, J.-B. Vaney, P. Boullay, V. Nassif, A. Sulpice, H. Mayaffre, M.-H. Julien, S. Tencé, P. Toulemonde Abstract Chemical composition provides a powerful route to tune the electronic ground state of iron-based superconductors and other quantum materials, yet access to highly doped phases remains limited. Here we demonstrate that high-pressure thermal decomposition of hydrogen-rich precursors enables over-hydrogenation of LaFeSi. Using anthracene, we synthesize tetragonal superconducting LaFeSiH, including a single hydrogen site, while ammonia borane yields a structurally distorted over-hydrogenated phase, LaFeSiH 1+x , with an orthorhombic structure. Chemical analysis reveal excess hydrogen (x ≈ \approx 0.6), implying a second H site in LaFeSiH 1.6 whose localization and occupancy are determined by neutron diffraction. In contrast to metallic LaFeSi and superconducting LaFeSiH, orthorhombic LaFeSiH 1.6 exhibits semiconductor-like behavior. Upon hydrogen release near 100 °C, it transforms into tetragonal superconducting LaFeSiH 1+δ ( δ ≪ 0.6 \delta\ll 0.6 ). These results establish the chemical flexibility of the layered LaFeSiX (X = H, O, F) family and provide access to a high hydrogen-doping regime, creating new opportunities to investigate superconductivity in Fe-based silicides. I Introduction The prototypical iron-based superconductor (IBS) LaFeAsO (1111-type) is a part of a large structural family that includes oxides, fluorides, and hydrides, crystallizing in the ZrCuSiAs-type structure. The expansion of the family of iron-based superconductors (IBS) to the iron crystallogenides LaFeSi(H/F/O) 6 ; 35 ; 17 , brought with it prospects of increasing the T c of these materials by tuning the electronic structure through e.g. chemical substitution on the 2b site of the tetragonal lattice, i.e. the site of H/F/O (at the center of the La 4 tetrahedra). In the 1111 arsenides, high pressure techniques have been used to make a wide range of substitutions, unveiling the effects of doping on the electronic structure 20 ; 19 ; 21 . This suggests that using high pressure, one might be able to tune the electronic properties of FeSi based superconductors by appropriate chemical substitution. Contrary to arsenides, the silicides show a higher degree of chemical diversity. Substitution on the lanthanum ( 2c ) site, a well explored substitution scheme in the arsenides, has recently been explored in La 1-x Ce x FeSiH 33 , however, it is the substitution on the arsenic site which sets the silicides apart. Such substitutions span to all end-members, notably with the hydride LaFeSiH, suggesting that a high tunability should be possible in these systems 6 ; 18 . Although the application of pressure is not necessary to synthesize the end-members of the series LaFeSiO 1-x H x , the full substitution series has not yet been synthesized. However, a different structural perturbation strategy, is to push LaFeSiH to higher hydrogen contents and investigate the impact on the electronic properties in this system. This could allow doping levels higher than those ever seen in any IBS 21 . Here, we study the synthesis of (metastable) hydrides of LaFeSi using high-pressure techniques, in two different temperature regions, by using two different hydrogen sources, to leverage the kinetics barrier at lower temperatures to stabilize high hydrogen contents. We report a new over-hydrogenated phase, LaFeSiH 1.6 , where the four-fold rotational symmetry of LaFeSiH is broken, reducing the symmetry to orthorhombic. Furthermore, LaFeSiH 1.6 exhibits a semiconductor-like behavior, as opposed to the metallic precursor LaFeSi and tetragonal superconductor t-LaFeSiH (metallic in the normal state). To assess the thermal stability of LaFeSiH 1.6 we performed high temperature X-ray powder diffraction (XRD), revealing that LaFeSiH 1.6 expels the extra hydrogen around 100 °C and reverts to the tetragonal structure, re-assuming its superconducting properties. We have also followed the decomposition of LaFeSiH 1.6 to t-LaFeSiH using thermogravimetric analysis (TGA), differential thermal analysis (DTA) and mass spectrometry (MS), confirming the scenario that the extra hydrogen leaves the structure upon heating. Combining transmission electron microscopy (TEM) and neutron powder diffraction (NPD) allows us to determine the localization of the two H sites in LaFeSiH 1.6 . Finally, by comparison with t-LaFeSiH which has only a single H site, nuclear magnetic resonance (NMR) measurements confirms the existence of the second extra hydrogen site. II Methods II.1 Synthesis Synthesis was carried out using LaFeSi as a precursor, prepared as described by Bernardini et al. 6 . The precursor material typically had a purity of \sim 95-97 % with minor Fe-based impurities being paramagnetic LaFe 2 Si 2 ( \sim 2 wt %) 34 ; 31 and magnetic La(Fe 1-x Si x ) 13 (< 1 wt %) 27 (see precursor XRD pattern in Suppl. Mat. of Ref. 18 ). Such minor secondary phases remain after the hydrogenation process with the second one being hydrogenated into magnetic La(Fe 1-x Si x ) 13 H y (undetectable in our laboratory XRD) which orders below a Curie temperature above room temperature (up to \sim 340 K) 29 . These tiny impurities do not affect the conclusions made for the hydrogenated main phase LaFeSiH 1+x studied here. However, the presence of a minute amount of La(Fe 1-x Si x ) 13 H y gives a magnetic background which complicates the direct observation of superconductivity in magnetization (See Supplemental Material. B 2 ). To make our high pressure crucible assembly, dried NaCl was compacted in a 9 mm die, applying 8 tons, to form pellets with a height of around 1.5 cm and 0.5 cm. The tall pellets were machined into crucibles with an inner diameter of 6 mm. All pellets were subsequently dried by placing them in a furnace at 200 °C for 24 h to ensure that water was not present in the crucible. The finished crucibles were then transferred to a glove box for dry storage under Argon. When preparing the synthesis, pellets of LaFeSi and Hydrogen source material (Anthracene or Ammonia Borane (AB)) were pressed in two different pellets with mass ratios to have excess hydrogen corresponding to H/LaFeSi molar ratio of approximately 20/1, with a diameter matching the bore of the NaCl crucibles. A NaCl crucible was then transferred into a Au capsule and both pellets were inserted in the NaCl crucible separated physically by a thin hexagonal BN cylindrical spacer which is known to prevent carbon diffusion 13 , in order to avoid any reaction of LaFeSi with C or B, from the decomposed hydrogen source, Anthracene and AB respectively. The NaCl crucible was then closed with a NaCl lid, where-after the Au capsule was sealed with an opposing Au capsule piece. All of the above steps were performed under Argon. The capsule was transferred to a CONAC-28 type press and pressurized to 0.5 - 1 GPa for Anthracene and 1 GPa for AB, ensuring a tight seal of the assembly. The sample was then heated to 600 - 700 °C for Anthracene and 400 °C for AB and subsequently quenched to room temperature. The pressure was slowly released and the capsule was recovered. A LaFeSiH 1+x sample was prepared with AB for a dedicated neutron powder diffraction experiment using similar conditions (1-1.5 GPa and 400 °C) and 20/1 molar ratio in a CONAC-40 type press, which allows to treat larger amount of reactants. After checking by X-ray diffraction (XRD),

Read the complete text