Including nanoparticle shape into macrospin models
Iago López-Vázquez, Òscar Iglesias, David Serantes · 2026
Read Including nanoparticle shape into macrospin models by Iago López-Vázquez, Òscar Iglesias, David Serantes (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-20450.txt.
Introduction
López-Vázquez and two colleagues test whether the simple macrospin approximation captures the true shape of soft magnetic nanoparticles, focusing on the well known mineral magnetite. Using a superellipsoidal shape formula moving smoothly from round to cubic shapes, they compare hysteresis loops that vary with angle from micromagnetic simulations against an extended Stoner-Wohlfarth model. That model adds an effective uniaxial term from particle stretch to the intrinsic cubic crystal anisotropy. It holds roughly from 10 to 60 nanometers for axial ratios above 1.5, and from 20 to 60 for ratios between 1.0 and 1.5.
Catalog record
| CREATOR | Iago López-Vázquez, Òscar Iglesias, David Serantes |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 49619 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.20450
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Including nanoparticle shape into macrospin models Iago López-Vázquez, Òscar Iglesias, David Serantes Abstract We investigate the feasibility of the macrospin approximation to account for the actual shape of soft magnetic nanoparticles (MNPs) with realistic geometries. Specifically focusing on magnetite, we use the superellipsoidal parametrisation to account for a variety of shapes, with a continuous interpolation from spherical to cubic morphologies, as well as different elongations. Our procedure consists of the direct comparison between angular-dependent hysteresis loops obtained by full micromagnetic simulations, with those produced by an extended Stoner–Wohlfarth (SW) model that incorporates both the intrinsic cubic magnetocrystalline anisotropy, and an effective uniaxial contribution arising from the particle elongation. Our results show that the extended SW framework provides quantitative agreement with micromagnetics over a broad range of particle volumes and aspect ratios, demonstrating that the effective uniaxial term captures the dominant shape‑induced contributions. The limits of validity of the macrospin description are approximately 10–60 nm for axial ratios r > 1.5 r>1.5 , and 20–60 nm for 1.0 < r < 1.5 1.0<r<1.5 . These results establish a direct connection between nanoparticle morphology and effective macrospin parameters, demonstrating the suitability of the generalized SW model for describing the magnetic response of realistically shaped MNPs. I Introduction The theory developed by E. C. Stoner and E. P. Wohlfarth 44 remains a cornerstone for understanding the behavior of magnetic nanoparticle (MNP) systems 47 ; 46 ; 9 . Their key aspect was to consider the magnetization of the particle to remain essentially uniform under applied and/or thermal fields. This implies that the particle size and shape lie within the single-domain range, so that the magnetization rotates coherently. In this regime, the particle’s magnetic moment can be regarded as a large macrospin. This formalism has enabled the development of advanced theoretical approaches to describe the magnetization dynamics of nanoparticle ensembles 38 ; 2 ; 41 . A major advantage of the SW model for interpreting experimental data is the direct correlation between the intrinsic particle parameters—saturation magnetization ( M_{S} ) and anisotropy constant ( K )—and measurable macroscopic quantities, particularly the coercive field ( H_{C} ) and remanence ( M_{R} ) obtained from magnetization–field [ M(H) ] measurements. Well defined values can be obtained both for uniaxial- and cubic-anisotropy particles 16 ; 15 . Thus, experimental M(H) data can be used to infer the underlying anisotropy characteristics 54 ; 37 . Owing to its simplicity and physical transparency, the SW framework has been extensively applied in both experimental 3 ; 55 and theoretical 57 ; 1 ; 23 studies to interpret the magnetization behavior of MNP ensembles. The objective of this work is to investigate the applicability of an extended SW model to account for actual particle shape of experimental samples. Thus, while Stoner and Wohlfarth considered particles with either uniaxial ( K_{u} ) or cubic ( K_{c} ) anisotropy constants in their pioneering work 44 -i.e. one type or the other-, recent works identified the need to account for both anisotropies simultaneously: the intrinsic magnetocrystalline term, always present, plus a uniaxial contribution accounting for shape effects 4 ; 14 ; 21 ; 13 ; 40 . From now on, we shall refer to such extended SW model as the K_{c}+K_{u} model. Despite the reported works based on the more sophisticated K_{c}+K_{u} , the fact is that the behavior of MNPs is frequently analyzed within an effective uniaxial-anisotropy framework 5 ; 33 , assuming that the shape-induced anisotropy contribution largely dominates over the intrinsic magnetocrystalline one 51 ; 53 . In other words, it is implicitly presumed that the particles deviate substantially from a spherical geometry. In practice, this assumption is not unfounded, as MNPs are rarely perfect spheres or cubes 42 ; 36 ; 39 ; 32 ; 17 ; 27 ; 31 , as illustrated in Fig. 1 . The extent to which deviations from ideal geometry modify the overall magnetic response remains an open question. Figure 1: Schematic representation of superellipsoidal shapes of different exponents p and axial ratios r=c/a , similar to those observed experimentally. TEM images modified from 36 with the permission of American Chemical Society. The present study aims to establish the range of validity of the simplified uniaxial-only anisotropy approach in comparison with the more sophisticated K_{c}+K_{u} model. To this end, we have conducted a computational simulation of M(H) hysteresis loops of particles with different shapes and sizes, considering both a full description of the particle properties and the corresponding macrospin approximation. A micromagnetic approach is employed to accurately capture particle shape while maintaining computational feasibility for relatively large system sizes. The size dependence is analyzed to assess the applicability of the macrospin approximation. For simplicity, we restrict the analysis to spherical and cubic particles, as well as intermediate shapes described by a superellipsoidal geometry, including elongation effects. The article is organized as follows. Sections II and III briefly describe the physical and computational frameworks employed. In Section IV.1 , we analyze in detail the influence of particle shape and elongation on the magnetic behavior of magnetite nanoparticles from a micromagnetic perspective, focusing on the determination of the size range for which the magnetization remains essentially uniform under an applied external field. In Section IV.2 , we assess the validity of the generalized K_{c}+K_{u} macrospin modelthrough a direct comparison with micromagnetic simulations. This analysis includes the angular dependence of the main hysteresis parameters, orientation-averaged hysteresis loops, and a phase diagram identifying the range of applicability of the macrospin approximation. Finally, in Section IV.3 , we contrast these results with those obtained from the SW model considering only uniaxial or cubic anisotropy. II Physical model In this work, we consider two complementary descriptions of the magnetic behavior of MNPs. On the one hand, we employ a full micromagnetic model, in which the particle shape is explicitly accounted for through a superellipsoidal parametrization. On the other hand, we use a macrospin model, where the particle is assumed to remain in a quasi-uniform magnetic state and the effect of elongation is incorporated effectively through the demagnetizing factors entering the energy terms. The material parameters used are listed in Table 1 . Table 1: Material parameters used for magnetite (Fe 3 O 4 ). Parameter Symbol Value Saturation magnetization M_{s} 4.8\times 10^{5} A/m Exchange stiffness constant A 1.1\times 10^{-11} J/m Cubic anisotropy constant K_{c} -1.1\times 10^{4} J/m 3 Exchange length L_{\mathrm{ex}} 8.7 nm II.1 Micromagnetic model The physical model employed in the micromagnetic simulations is the same as that used in Ref. 24 . Briefly, the micromagnetic model accounts for four energy contributions: cubic magnetocrystalline anisotropy, exchange, demagnetizing, and Zeeman energies. We consider nanoparticles exhibiting variations in both shape and elongation, modelled through the geometry of a generalized superellipsoid 18 . This parametrization enables a continuous description of morphologies ranging from spherical to cubic, as well as deviations from perfect isotropy through an axial ratio r\neq 1.0 , defined as the ratio between the longest and shortest particle axes ( r=c/a ). Such variations provide a realistic representation of experimentally synthesized magnetite nanoparticles, which almost invariably display slight elongations and departures from ideal shapes, as shown in Fig. 1 . The superellipsoidal geometry is defined by 8 ; 10 \left(\frac{x}{a}\right)^{2p}+\left(\frac{y}{b}\right)^{2p}+\left(\frac{z}{c}\right)^{2p}\leq 1,