Shell effects and the neutron emission within the multi-dimensional Langevin model for nuclear fission
F.A. Ivanyuk, S.V. Radionov, C. Ishizuka, S. Chiba · 2026
Read Shell effects and the neutron emission within the multi-dimensional Langevin model for nuclear fission by F.A. Ivanyuk, S.V. Radionov, C. Ishizuka, S. Chiba (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-19576.txt.
Introduction
Ivanyuk and colleagues solve Langevin equations for the time evolution of shape parameters of a fissioning system. At each integration step, they compute the neutron emission odds and judge whether a neutron would be emitted. If so, they lower the nucleus excitation energy by the separation energy plus the emitted neutron's average energy. They then move to a potential energy layer with one fewer neutron and keep integrating. At scission, they count emitted neutrons, defining pre-scission multiplicity as total emitted neutrons over total fission paths.
Catalog record
| CREATOR | F.A. Ivanyuk, S.V. Radionov, C. Ishizuka, S. Chiba |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35735 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.19576
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Shell effects and the neutron emission within the multi-dimensional Langevin model for nuclear fission F.A. Ivanyuk, S.V. Radionov, C. Ishizuka, S. Chiba Abstract We solve the Langevin equations for the time evolution of parameters that describe the shape of fissioning system. On each integration step, we calculate the probability of neutron emission and estimate whether a neutron would be emitted or not. If yes, we decrease the excitation energy of the nucleus by the neutron separation energy plus the average energy of the emitted neutron, switch to the layer of potential energy surface with a smaller number of neutrons and continue the process of integration. If the trajectory reaches the scission point, we check how many neutrons were emitted along this trajectory. The pre-scission neutron multiplicity M p r e M_{pre} is defined by the ratio of the total number of emitted neutrons to the total number of fission trajectories. Besides M p r e M_{pre} , the mass distribution of fission fragments, the distribution of emitted neutrons with respect to the fission stage (deformation of system) and the distribution of emitted neutrons with respect to their energies are calculated. The calculated quantities are compared with the available experimental data. pacs 24.10.-i, 25.85.-w, 25.60.Pj, 25.85.Ca I Introduction The approach based on Langevin equations langevin has been successfully applied in various branches of theoretical physics and chemistry for many years. In nuclear physics, this approach is used for the description of fission or fusion processes at excitations above the fission barrier nix76 ; wada93 ; froebrich ; pomorski1996 ; karpov ; asano ; adeev2005 ; aritomo ; mazurek ; our17 ; scirep ; pasha ; kosenko ; pomo2024 ; aritomo2025 ; song2026 . In these works the Langevin equation was solved in 1-4 dimensions with macroscopic werwhe ; wall1 ; runswiat or microscopic hofrep ; hofbook ; ivahof transport coefficients. The approach describes quite well the mass distributions and kinetic energies of fission fragments, the multiplicities of emitted neutrons, and other observable of fission or fusion processes. The five-dimensional calculations were published so far only in sierk ; 5dimen ; sublead . Within the five-dimensional model, several observables, such as the mean mass asymmetry seen in fission, the width of the mass yields of the heavy and light peaks, the approximate average fragment kinetic energy for fission of actinide nuclei, both spontaneous and induced by neutrons of energies of up to the threshold for second-chance fission, were accurately reproduced, sierk . The extension of the model to the five-dimensional shape parametrization made it also possible to reproduce such fine details of the fission process as transition from mass-symmetric to mass-asymmetric via three-humped mass distribution in thorium isotopes 5dimen and remarkably accurately reproduce the fission fragment mass distributions in fission of 180 Hg and 190 Hg at few values of the initial excitation energy, sublead . In the main part of the above mentioned publications, the so-called first chance fission was considered. The influence of the light particles and gamma-ray emission was neglected. However, during the evolution of the fissioning nucleus from the compound nucleus to the scission configurations, the de-excitation of the nucleus by emitting light particles, neutrons, protons, or \alpha particles and gammas takes place. At relatively low excitation energies E^{*} smaller than 80 MeV, only neutron evaporation takes place, while the emission of a proton or \alpha particle is unlikely pomo2000 . Emission of the high-energy \gamma -rays in competition with neutron evaporation is rare and is therefore neglected in the present study. The coupling of Langevin equations with the particle emission has been investigated for a long time. We would refer here to the two recent publications pomo2024 ; aritomo2025 . In aritomo2025 , the authors use a three-dimensional Langevin model and take into account the evaporation by the compound nucleus before scission. The fission fragment mass distributions and the pre-scission neutron multiplicities are calculated for the isotopes of uranium, neptunium, and plutonium. Like in our present work, the authors discuss at which deformation the neutrons are emitted. In Fig.4, they present the distribution of emitted neutrons in two-dimensional collective space for fission of 238 U at E^{*} =45 MeV. Unfortunately, they do not show similar results at smaller excitation energies. Pomorski et al., pomo2024 use a four-dimensional Langevin model. Like aritomo2025 , they calculate pre-scission emission, but they also compute the emission of neutrons by the fragments after scission, i.e., post-scission. Like aritomo2025 , they discuss at which deformation the neutrons are emitted, but also at high E^{*} only. In the present work, we use the detailed description of the fission process offered by the Langevin approach to study the simultaneous shape evolution and the neutron emission. As the demonstration we present calculated results for the fission of 236 U at the excitation energies 10<E^{*}<40 MeV. For this, we modify the previously used Langevin model in the following way. On each step of the integration of equation, we estimate whether a neutron was emitted or not. If yes, we reduce the local excitation energy by the neutron separation energy plus the average energy of the emitted neutron, switch to the deformation energy layer with smaller neutron number and continue integration of the Langevin equations. The tensors of friction and inertia are not modified since they do not depend on the excitation energy and are smooth functions of the particle number. In this way, we get very detailed information on the process of emission. We can figure out at which stage of fission the neutrons are emitted, what the number of emitted neutrons is with a given kinetic energy, and what is the number of emitted neutrons per fission event. The computation of dN/dt takes some additional time. Besides, due to the neutron emission, the excitation energy becomes smaller; consequently, the fission probability is also smaller. These two factors increase the computation time substantially. In order to bring it to an acceptable level, we restrict the number of collective variables to four, the neck parameter \epsilon is kept fixed, \epsilon=0.25 . That is a little bit less than the standard value \epsilon=0.35 used in our previous works. We have checked that with \epsilon=0.25 the calculated fragment mass distributions for fission of 236 U are closer to the experimental results. The incorporation of neutron emission into the five-dimensional Langevin model will be the subject of future work. To estimate whether a neutron was emitted or not, we need some approximation for the neutron emission rate dN/dt. The popular models weiss2 ; dipori ; pomo2002 supply the neutron emission probability for the whole fission process and do not fit well for use in the Langevin approach. The description based on the Langevin equation is very detailed. At a given moment (fission stage), the trajectory does not ”know” whether it will reach the scission point, or will stay within the potential well around the ground state or will reach the limits of the deformation space and will be abandoned. The instantaneous emission rate can not depend on the fission barrier height or on the cross section of the inverse reaction. It could depend only on the local quantities like the shape of the fissioning system, or the