Brillouin-Enhanced Photonic Stepped-Frequency Radar

Ziqian Zhang, Ryan L. Russell, Choon Kong Lai, Benjamin J. Eggleton · 2026

Read Brillouin-Enhanced Photonic Stepped-Frequency Radar by Ziqian Zhang, Ryan L. Russell, Choon Kong Lai, Benjamin J. Eggleton (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-19058.txt.

Introduction

Zhang and three colleagues demonstrate a photonic stepped frequency radar using dual Brillouin lasers in one fiber cavity. The design suppresses phase noise and enforces uniform steps at once, solving a challenge for existing architectures. Brillouin suppression plus common mode rejection on mixing cuts phase noise, while evenly spaced cavity resonances set step uniformity. The system produces an X-band waveform spanning 1.31 GHz, improving phase noise over 23 dB at a 100 kHz offset against a low cost oscillator. It thus frees output quality from driving electronics noise.

Catalog record

CREATORZiqian Zhang, Ryan L. Russell, Choon Kong Lai, Benjamin J. Eggleton
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23310
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.19058

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Brillouin-Enhanced Photonic Stepped-Frequency Radar Ziqian Zhang, Ryan L. Russell, Choon Kong Lai, Benjamin J. Eggleton Abstract Photonic stepped-frequency (SF) radar offers high range resolution and only requires low-speed driving electronics, but existing architectures face challenges in achieving low phase noise and uniform frequency steps simultaneously. Here, we demonstrate a photonic SF radar system that exploits dual Brillouin lasers in a shared fiber cavity to simultaneously suppress phase noise and ensure uniform frequency stepping. Phase noise is reduced through Brillouin optomechanical suppression and common-mode noise rejection upon photomixing. Frequency-step uniformity is enforced via lasing at a series of uniformly spaced cavity resonances. The system generates an X-band SF waveform spanning 1.31 GHz, achieving >23 dB of phase-noise improvement at a 100 kHz offset relative to a low-cost driving voltage-controlled oscillator. The demonstrated system reduces the dependence of the output waveform quality on noise in the driving electronics, offering a path towards high-performance radar sensing. Radar systems are fundamental to modern sensing, driving applications from indoor vital-sign monitoring 49 to satellite-based exploration of Mars’ ionosphere 34 . To meet evolving sensing demands, microwave photonics (MWP) 42 ; 30 offers a pathway to next-generation performance by enabling low-noise 12 signal generation at high carrier frequencies 19 . By accessing these higher frequencies, systems can utilize broader RF bandwidths to achieve superior range resolution 36 . Furthermore, the low transmission loss of photonic links enables distributed, multi-band sensing 11 ; 40 ; 17 and radar-LiDAR fusion 7 , further improving overall system robustness. Radar’s range resolution improves with increasing bandwidth, allowing the system to separate closer targets. Photonic radars synthesize a wide bandwidth through frequency modulation, using either linear (LFM) or stepped (SF) waveforms. While LFM requires a continuous wideband sweep within each pulse, SF modulation synthesizes an equivalent bandwidth through discrete, narrowband steps 35 . This approach lowers the instantaneous bandwidth requirements for the electronics driving the photonic generator and receiver 6 ; 32 . As a result, photonic SF radar achieves high-resolution sensing with low-speed, MHz-level electronics, alleviating the need for costly high-performance components and enabling the practical deployment of photonic radar. To date, photonic SF radar systems employ three main approaches for waveform generation, each with distinct limitations. The first approach employs a photonics-based RF multiplication technique 37 ; 31 ; 44 , which multiplies an RF waveform from an electronic function generator and outputs bandwidth-broadened SF. The multiplication process not only increases the bandwidth of the input RF signal but also amplifies its phase noise, imposing a noise penalty that reduces the output signal quality (see Supplementary). The second approach uses frequency-shifting loops, where noise accumulates with each round-trip in the loop and progressively degrades signal-to-noise ratio (SNR) 47 ; 9 ; 45 ; 13 ; 28 ; 29 , creating a fundamental trade-off between bandwidth and noise. The third approach uses laser wavelength sweeping—via direct current modulation or injection locking in a master-slave laser configuration—but nonlinear tuning dynamics introduce time-frequency nonlinearity 51 ; 50 ; 43 ; 23 , resulting in inconsistent frequency steps that degrade radar sensing performance. Therefore, a photonic approach that simultaneously achieves low phase noise, wideband operation, and high time-frequency linearity without relying on high-speed electronics or complex system architecture remains a key goal. In this work, we demonstrate a low-noise photonic SF radar enabled by dual Brillouin lasers (BLs) in a high-quality (high-Q) factor fiber ring cavity. The system achieves >23 dB of phase-noise improvement (at a 100 kHz offset) relative to a driving low-cost voltage-controlled oscillator (VCO) by exploiting BLs’ optomechanical noise suppression and common-mode noise rejection via photomixing the two BLs. Uniform frequency stepping is ensured by locking each step to discrete, equally spaced cavity resonances, generating X-band SF waveforms spanning 1.31 GHz (8.16–9.47 GHz). The demonstrated system represents a path toward high-performance photonic radar with low phase noise and uniform frequency stepping—capabilities critical for resolving both weak and strong reflectors across a wide dynamic range for emerging applications, from healthcare monitoring to space exploration. Figure 1: Principle of stepped-frequency (SF) radar signal generation enhanced by dual Brillouin lasers. ( a ) Illustration of a microwave photonic link that uses Brillouin lasers to suppress the phase noise of an RF input signal. ( b ) System schematic. A voltage-controlled oscillator (VCO) drives an electro-optic modulator (EOM) to generate optical sidebands. Two sidebands are selected using an optical fiber. An erbium-doped fiber amplifier provides gain to the two sidebands, which are injected into a fiber cavity via an optical circulator. PD: photodetector; SF: stepped-frequency. ( c ) Optical frequency domain illustration of bi-chromatic pumping (pump 1 and pump 2) propagating in the counter-clockwise direction, and the corresponding dual Brillouin lasers propagating in the clockwise direction in a fiber ring cavity. The two pumps are generated from the first-order electro-optic modulation sidebands of a carrier, driven by an RF VCO at frequency f_{\text{VCO}} . Each pump induces a Stokes gain profile (green); when the gain exceeds the cavity loss, dual Brillouin lasers (red) are initiated. Optical spectra are shown at three successive time steps t_{1} , t_{2} , and t_{3} , corresponding to the first three VCO frequency increments of the SF waveform. ( d ) Time-frequency domain illustration of the input VCO waveform with high phase noise and the resulting output RF SF waveform with lower phase noise. Figure 1 illustrates the operating principle of the demonstrated radar signal generator: an MWP link based on dual BLs in a fiber cavity. The system simultaneously suppresses the VCO’s phase noise through Brillouin lasing (Fig. 1 a ), ensures uniform frequency stepping by pinning each lasing oscillation to a discrete cavity resonance equally spaced by the free spectral range (FSR), and increases the output bandwidth through photonics-based RF frequency multiplication. A VCO-generated driving signal—inherently with low bandwidth and high phase noise (Fig. 1 a )—is first transferred to the optical domain via electro-optic (EO) modulation (Fig. 1 c ). The EO modulator generates two first-order optical sidebands that carry the VCO’s phase noise, serving as dual Brillouin pumps (pump 1 and pump 2) injected into a fiber ring cavity via an optical circulator (Fig. 1 b ) 39 ; 27 . These pumps induce two Stokes signals in the counterpropagating direction (clockwise in Fig. 1 c ), each shifted downward in frequency by the Brillouin frequency shift. When the Stokes gain exceeds the round-trip cavity loss, the two Stokes modes start to oscillate as BLs. The phase noise of the resulting BLs is significantly reduced, owing to the combination of a short phonon lifetime and a long photon lifetime in the high-Q cavity, suppressing the transfer of pump phase noise to the laser emission 14 . Photomixing the two BLs then generates a low-phase-noise microwave signal. Additionally, because the two BLs share a common cavity, optical-path-length fluctuations are suppressed via common-mode noise rejection, further reducing phase noise at high offset frequencies 10 ; 21 . The SF waveform is generated by incrementing the digital-to-analog converter (DAC) output voltage to step-tune the VCO frequency (Fig. 1 a ), which, in turn, step-tunes the optical sidebands acting as Brillouin pumps. Each frequency step successively excites dual Brillouin lasing oscillations at equally spaced cavity resonances (Fig. 1 c

Read the complete text