Three-dimensional recoil-electron reconstruction using combined optical imaging and waveform readout for electron-tracking Compton cameras
Tomonori Ikeda, Tatsuya Sawano, Naomi Tsuji, Yoshitaka Mizumura · 2026
Read Three-dimensional recoil-electron reconstruction using combined optical imaging and waveform readout for electron-tracking Compton cameras by Tomonori Ikeda, Tatsuya Sawano, Naomi Tsuji, Yoshitaka Mizumura (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-19051.txt.
Introduction
Ikeda and three colleagues reconstruct three dimensional recoil electron directions for electron tracking Compton cameras. Full 3D readout gives high precision but overwhelms large detectors with data volume. Their method combines a high resolution 2D optical image, a 1D waveform signal, and deep learning. It reaches angular resolution of about 44 degrees for recoil electrons in the 40 to 50 keV range, about 1.3 times better than their earlier strip readout approach. Start point resolution also improves over the earlier method across the 5 to 50 keV range.
Catalog record
| CREATOR | Tomonori Ikeda, Tatsuya Sawano, Naomi Tsuji, Yoshitaka Mizumura |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42930 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.19051
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Three-dimensional recoil-electron reconstruction using combined optical imaging and waveform readout for electron-tracking Compton cameras Tomonori Ikeda, Tatsuya Sawano, Naomi Tsuji, Yoshitaka Mizumura Abstract Accurate reconstruction of recoil-electron directions is critical for enhancing the point-spread function of electron-tracking Compton cameras (ETCCs) in gamma-ray imaging. Although full three-dimensional (3D) readout systems achieve high-precision reconstruction, they are impractical for large-area detectors because of the enormous data volume. This study proposes and demonstrates a practical alternative for inferring the 3D recoil-electron direction in Compton scattering. This method combines a high-resolution two-dimensional optical image, a one-dimensional waveform signal, and a deep-learning-based method through simulations. The proposed method achieved an angular resolution of approximately 44 ∘ 44^{\circ} for the recoil-electron direction in the 40–50 keV range, corresponding to an improvement of a factor of about 1.3 compared with our previous strip-readout approach using pseudo-experimental data generated by Geant4 and MAGBOLTZ simulations for an argon-based gas time projection chamber. In addition, the starting-point resolution of the electron track was improved over the previous method across the 5–50 keV electron energy range. These results demonstrate that complementary information from the transverse image and longitudinal waveform can effectively recover the 3D track topology without requiring full 3D readout. The proposed approach provides a realistic pathway for improving ETCC imaging performance. PTEP-subject xxxx, xxx † † preprintnumber: XXXX-XXXX 1 Introduction Observations of MeV gamma rays enable a unique probe of astrophysical processes such as electron-positron annihilation in the Galactic center region [ 25 , 16 , 26 ] , nucleosynthesis [ 10 ] , and non-thermal emission from compact objects [ 8 ] . Despite their importance, observations in the MeV energy range remain limited because of the difficulties in achieving both high angular resolution and background suppression. Electron-tracking Compton cameras (ETCCs) have been developed to overcome these limitations by reconstructing the incident gamma-ray direction and resolving the full Compton-scattering kinematics, including information on the recoil-electron direction [ 30 ] . In ETCCs, the point-spread function (PSF) strongly depends on the accuracy of the reconstructed recoil-electron direction [ 29 ] ; thus, the improvement of the precision of recoil-electron reconstruction is essential. Various approaches have been proposed for reconstructing electron tracks and recoil-electron directions in gaseous detectors [ 27 , 21 , 4 , 9 , 17 , 19 , 1 , 11 , 18 , 22 ] . In our previous study, we developed an ETCC equipped with a micro pixel chamber ( \mu -PIC) [ 20 , 28 ] as the readout plane, and applied a deep learning (DL) method to reconstruct the recoil-electron direction from the measured two-dimensional (2D) track images [ 14 ] . The \mu -PIC is a strip readout detector with an intrinsic pitch of 400 \mu m, and the readout was performed by summing two channels, resulting in an effective pitch of 800 \mu m. Consequently, two projected images, xz and yz , were obtained, where the longitudinal axis z corresponds to the drift direction of the TPC. The z -axis information was reconstructed from the time-over-threshold (TOT) signal and timing information, which depends on the drift time of the electrons and the shaping time of the amplifiers. Because the width of the TOT signal was typically the order of several centimeters, the achievable resolution along the z -axis direction was limited, indicating that the accuracy of the z determination, given a realistic drift velocity, was substantially poorer than that in the xy plane. Conversely, full three-dimensional (3D) voxel-based readout enables high-precision reconstruction when fine spatial information is available [ 13 ] . However, implementing such a system in large-area detectors such as ETCCs is challenging because of the enormous data volume requirement. These considerations motivate the development of a practical approach for recovering 3D track information from reduced-dimensional measurements. In particular, a detector configuration combining a high-resolution 2D optical image with a one-dimensional (1D) waveform signal provides complementary information: the optical image provides precise transverse track morphology, whereas the waveform encodes the longitudinal structure through the drift time of ionization electrons. However, no previous study has demonstrated a method for reconstructing the full 3D recoil-electron direction or the 3D track by systematically integrating these two types of data modalities. In this study, we propose and demonstrate a multistage DL framework that integrates 2D optical images and 1D waveform data to reconstruct the 3D recoil-electron direction. The results indicate that combining optical imaging with waveform readout provides a practical alternative to full voxel-based detectors and offers a viable pathway for improving the PSF and imaging performance of the ETCC. The remainder of this paper is divided into four sections. In Sec. 2 , a pseudo-experimental dataset used to train the deep-learning model is introduced. In Sec. 3 , three neural-network architectures are developed to extract representative track points, reconstruct 3D track trajectory, and estimate the recoil-electron direction. In Sec. 4 , the performance of the network model is evaluated, and the accuracy of the starting-point of the electron track and electron-recoil direction is compared with that of previous studies. Finally, the limitations of the proposed network model and future prospects are discussed in Sec. 5 . 2 Data preparation In this section, we describe the pseudo-experimental dataset used to train the DL model. We assumed using an optical readout gas detector consisting of a TPC coupled to a gas electron multiplier (GEM) [ 24 , 12 ] for charge amplification. During gas amplification, scintillation photons produced in the GEM are detected by a charge-coupled device (CCD) or complementary metal-oxide-semiconductor (CMOS) camera. Electron tracking using such optical readout gas detectors has already been demonstrated experimentally [ 23 , 3 ] . In addition, the charge signal is read out from a transparent anode plate composed of indium tin oxide [ 6 ] . Our purpose is to determine the 3D recoil-electron direction using a combination of these detector components. Based on these established detector configurations, we construct a realistic pseudo-experimental dataset. 2.1 Monte Carlo simulation Electron tracks were simulated using Geant4 (version 11.0) [ 2 ] . A gaseous TPC filled with argon-based gas (95%Ar + 3%CF 4 + 2%iso-C 4 H 10 ) at a pressure of 2 atm was modeled, corresponding to the same configuration used in our previous work [ 14 ] for comparison. Each primary electron was generated with a kinetic energy in the range of 5–50 keV, and the trajectory of the electron was tracked until its energy fell below the ionization threshold. Fig. 1 shows a typical event with an initial electron energy of 49 keV. All events were generated at a fixed drift distance of 10 cm above the gas amplification region, with the initial directions uniformly distributed in the solid angle. A total of 2.5\times 10^{6} events were uniformly produced in energy, and 20% of the produced data were used as the validation data. (a) (b) (c) Figure 1: Example of pseudo-experimental data for a 49 keV electron. (a) Three-dimensional electron trajectory obtained from the Geant4 simulation. The marker size is proportional to the deposited energy along the track, and the color scale represents the z coordinate. (b) Simulated optical image projected onto the xy plane after including diffusion and optical readout effects. The color scale