Neural Operator Representation of Granular Micromechanics-Based Failure Envelopes
Jinkyo Han, Payam Poorsolhjouy, Bahador Bahmani · 2026
Read Neural Operator Representation of Granular Micromechanics-Based Failure Envelopes by Jinkyo Han, Payam Poorsolhjouy, Bahador Bahmani (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-19027.txt.
Introduction
Han, Poorsolhjouy, and Bahmani propose a differentiable neural operator mapping micro layouts to failure envelopes. These models predict failure in concrete, soils, foams, and tissues, but mapping to them needs costly runs along loading paths. Their operator enables fast forward prediction and inverse identification without reruns. Physics informed training forces envelopes to stay convex, per Drucker's postulate and ruling out nonphysical artifacts. Finite difference offers the better trade off for the penalty term in their DeepONet setting. The operator learns from envelopes stored as rough point clouds.
Catalog record
| CREATOR | Jinkyo Han, Payam Poorsolhjouy, Bahador Bahmani |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 77265 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.19027
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Neural Operator Representation of Granular Micromechanics-Based Failure Envelopes Jinkyo Han, Payam Poorsolhjouy, Bahador Bahmani Abstract Micromechanics-based granular models are widely used to predict the failure behavior of porous and particulate materials, including concrete, soils, foams, and biological tissues. Although these models offer considerable flexibility through microstructural parametrization and statistical representation, their mapping to macroscopic responses, particularly failure envelopes, is implicit and requires costly nonlinear, non-smooth simulations, where each failure point is obtained by following a loading trajectory. This limitation is further amplified in inverse settings, where one seeks microstructure configurations that reproduce a target failure response. In this work, we propose a differentiable neural operator that learns the mapping from microstructure configurations to failure envelopes, enabling efficient forward prediction and inverse identification without repeated micromechanical simulations. To ensure mechanical admissibility, we incorporate a physics-informed training strategy that enforces convexity of the predicted envelopes, consistent with Drucker’s postulate, thereby eliminating potential non-physical artifacts. We also compare finite difference and automatic differentiation for evaluating the proposed regularization, and find that finite difference provides a favorable practical trade-off in the present DeepONet-based setting. The operator is trained on failure envelopes represented as irregular point clouds, allowing learning from data sampled at heterogeneous resolutions. To further reduce computational cost, we introduce an active learning strategy that adaptively queries the micromechanical model in regions of high epistemic uncertainty. This leads to efficient exploration of the parameter space with fewer high-fidelity simulations. The versatility and performance of the method are demonstrated and benchmarked through several numerical examples. Keywords Granular Micromechanics Approach \cdot Active Learning \cdot Inverse Design \cdot Scientific Machine Learning 1 Introduction The macroscopic failure of quasi-brittle materials, including rocks, concrete, and advanced ceramics, arises from the collective and competing microscale mechanisms of load-bearing, damage, and degradation [ 33 , 55 , 66 ] . To incorporate these effects into macroscopic descriptions, homogenization-based frameworks have been developed that represent the influence of the microstructure in an averaged sense. Among these, orientation-based formulations such as the Microplane model [ 5 ] and the Granular Micromechanics Approach (GMA) [ 13 ] describe the macroscopic response through quantities defined over many orientations. While they differ in their physical interpretation and level of micromechanical detail, both these approaches avoid explicit realization of the full microstructure and instead obtain the macroscopic behavior through integration over orientations. Variants of GMA have been successfully applied to a wide range of materials, including consolidated rocks, cemented sands, and cementitious composites [ 13 , 12 , 11 , 50 , 85 , 86 , 84 , 64 , 60 , 62 , 74 , 7 ] . Despite these strengths, GMA-based frameworks face two critical challenges. First, the calibration of microscopic constitutive relationships is non-trivial. Unlike explicit discrete simulations where physical laws like Hertzian contact may be directly applied [ 76 ] , the microscopic constitutive relationships in frameworks such as GMA and Microplane represent the response of microscopic constituents that are embedded within the material’s microstructure. Consequently, these microscopic constitutive relationships often do not reflect the behavior of isolated features, and their design is largely based on intuitive understanding of the physical mechanisms involved [ 4 ] . This becomes particularly evident when calibrating the microscopic constitutive relationships to achieve a target, perhaps experimentally derived, macroscopic failure envelope. Second, it has been observed that homogenization-based models derived from independent directional projections, such as GMA and the Microplane model, may produce failure envelopes that exhibit undesirable geometric features, including sharp vertices or spurious non-convexities [ 9 , 62 ] , as illustrated in fig. 1 . While these features may emerge from the orientation-dependent softening of microscopic constituents, they may present challenges for macroscopic structural analysis. In particular, the presence of non-convex regions is inconsistent with Drucker’s postulate [ 26 , 27 ] , which requires a convex failure surface to ensure stable material response. Figure 1: An example in which the GMA model output exhibits local non-convex behavior. The pointwise curvature values are evaluated using a central difference scheme. While homogenization-based schemes are significantly more efficient than direct numerical simulations, they still require a considerable computational effort to construct the macroscopic failure envelope. In particular, the material point must be probed over a range of loading paths, and for each path, a nonlinear incremental analysis is performed to extract a single point on the failure surface [ 73 ] . This makes the generation of a full failure envelope computationally intensive. Moreover, the resulting mapping from micromechanical configuration to the failure envelope is neither explicit nor smooth, which poses challenges for gradient-based inverse identification. To address these limitations, we propose a data-driven operator learning framework based on DeepOnet [ 54 ] that directly maps micromechanical configurations to the corresponding failure envelopes, bypassing the need for repeated directional loading simulations. By learning this mapping from data generated by the micromechanical model, the proposed approach provides a fast, differentiable surrogate that enables efficient forward evaluation and facilitates inverse analysis. The proposed neural operator treats the failure envelope as a “continuous” function, represented through irregularly sampled point sets. This enables learning from data with varying resolution and avoids reliance on fixed discretizations (i.e., is discretization-agnostic), which is essential when the data are heterogeneous [ 2 ] . In addition, to address the potential geometric inconsistencies observed in classical homogenization-based models, we incorporate a physics-informed regularization motivated by Drucker’s postulate. A curvature-based penalty is introduced to promote convexity of the learned failure envelopes, ensuring physically admissible responses while retaining fidelity to the underlying micromechanical model. The differential operators required for this regularization are computed using a finite difference (FD) scheme, in contrast to the more common use of automatic differentiation (AD). We empirically demonstrate that the FD approach provides faster training and inference. The differentiable structure of the surrogate further enables the formulation of an inverse problem, where micromechanical configurations are identified to match a target failure envelope. Unlike traditional calibration approaches, this framework allows systematic and gradient-based optimization. To reduce the cost of data generation, we introduce an adaptive sampling (active learning) strategy that selectively queries the high-fidelity micromechanical model based on measures of uncertainty and novelty. This is particularly important in applications where data acquisition is expensive, either due to the high computational cost of simulations or reliance on costly experiments. This becomes even more critical in high-dimensional settings, where random or grid-based sampling leads to prohibitively large datasets. Moreover, increasing the dataset size alone does not necessarily improve the predictive performance of data-driven surrogate models; instead, informed and targeted sampling can significantly enhance sample efficiency and generalization [ 52 , 81 ] . Related literature Operator learning: Operator learning has emerged as a powerful framework for approximating mappings between function spaces, with representative examples including Deep Operator Networks (DeepONet) [ 54 ] , the Fourier Neural Operator (FNO) [ 49 ] , and several subsequent variants tailored to partial differential equations and scientific computing [ 79 , 43 , 91 , 40 , 87 , 2 , 3 ] . More recently, operator-learning methods have also been extended to inverse problems, including neural inverse operators and related latent or physics-informed formulations for partial differential equation (PDE)-constrained inversion [ 65 , 92 ] . These