Scattering-Matrix-Based Parametric Characterization of a Two-Port Bridged-T Network for Microstrip Filter Applications Journal: arXiv

Naser Khatti Dizabadi, Douglas Jussaume · 2026

Read Scattering-Matrix-Based Parametric Characterization of a Two-Port Bridged-T Network for Microstrip Filter Applications Journal: arXiv by Naser Khatti Dizabadi, Douglas Jussaume (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-18353.txt.

Introduction

Dizabadi and Jussaume characterize a two-port Bridged-T network for microstrip filters using transmission and scattering matrices. From them they derive S11, S12, S21, and S22 for close study. When the two inductors match, even numerator coefficients in the S11 transfer function vanish, leaving odd ones behind. That feature yields a high-pass design with a 1 gigahertz corner frequency and sharp roll-offs near minus 30 and minus 32 decibels per GHz.

Catalog record

CREATORNaser Khatti Dizabadi, Douglas Jussaume
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE13963
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.18353

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Scattering-Matrix-Based Parametric Characterization of a Two-Port Bridged-T Network for Microstrip Filter Applications Journal: arXiv Naser Khatti Dizabadi, Douglas Jussaume Abstract The purpose of this study is to characterize a two-port Bridged-T network using transmission (T) and scattering (S) matrices. Using mathematical derivations, scattering parameters including S11, S12, S21, and S22 have been derived from the T and S matrices to permit a detailed investigation of the network’s performance. As two of the most relevant parameters in the design of microstrip filters, both the magnitude and phase of S11 and S21 have been parametrically calculated after normalizing the frequency. Furthermore, when the inductors L1 and L2 are identical, all even coefficients of the numerator polynomial in the S11 transfer function are eliminated, leaving only the odd coefficients behind. Based on this feature, the bridged-T circuit is designed to operate as a high-pass filter. Therefore, the magnitude and phase of both S11 and S21 have been simulated for the designed filter with a corner frequency of 1 GHz. Simulation results performed by Keysight ADS show that S11 and S21 for the high-pass filter built upon the bridged-T network have sharp roll-off ratios of -30dB/GHz and -32dB/GHz respectively. 1 Introduction High-frequency microstrip filters are widely used in the design and construction of radio communication systems [ 17 , 5 , 1 , 4 , 2 , 18 , 12 , 11 ] . The versatility of microstrip filters is derived from their ability to combine a variety of subsystems with unique transfer functions. This allows for the manipulation of the transfer function by strategically varying the geometric locations of the poles and zeros in a complex frequency plane. A bridged-T two-port network is one of the most commonly used subsystems in both low-frequency and high-frequency circuits. While several studies have examined the use of different bridged-T networks in the design of microstrip filters [ 10 , 9 , 14 , 13 , 8 , 3 , 7 ] , this paper explores the characterization of a bridged-T network enhanced with a parallel LC resonator. This study aims to extract all components of the transmission and scattering matrices in order to provide a more comprehensive understanding of its behavior under a variety of circumstances. As a further step, we parametrically determine both the magnitude and phase of the critical scattering parameters, S11 and S21. These parameters are instrumental in evaluating the quality of a microstrip filter. By introducing two identical inductors into the bridge section, we demonstrate that the bridged-T network can be transformed into an effective high-pass filter. In order to verify this finding, we meticulously designed and simulated a high-pass filter with a cutoff frequency of 1 GHz. A sharp roll-off is observed in the simulation results, confirming the bridged-T network’s ability to act as a high-pass filter. Detailed explanations and simulation results follow, providing a comprehensive overview of the bridged-T network’s performance and its significance for high-pass filtering. 2 The Transmission and Scattering Matrices Figure 1 shows a customary two-port Bridged-T network in which capacitor C_{1} establishes a bridge connection between port one and port two, while the combination of the inductors L_{1} and L_{2} , along with the parallel LC tank, create a T sub-network. The parallel LC tank, comprised of capacitor C_{2} and inductor L_{3} , assumes the role of determining the resonance frequency within this circuit. Figure 1: A two-port capacitive bridged-T network To begin the analysis of the circuit depicted in Figure 1 , the Laplace impedances of all components have been calculated and are presented in Equations ( 1 ) to ( 4 ). Z_{L_{1}}=SL_{1} (1) Z_{L_{2}}=SL_{2} (2) Z_{L_{3}}=SL_{3} (3) Z_{L_{3}C_{2}}=\frac{1}{\frac{1}{SL_{3}}+SC_{2}} (4) To see better, an illustration of the equivalent impedances of the components is provided in Figure 2 . Figure 2: Laplace equivalent impedance of the bridged-T network After applying a Y to \Delta conversion, as described in [ 6 ] , to the circuit depicted in Figure 2 , the bridged-T network has been transformed into a \Pi network, simplifying the analysis. This simplified \Pi network is illustrated in Figure 3 where Y_{1} , Y_{2} , and Y_{3} are the equivalent admittances for each component in the \Pi network equated through the equations ( 5 ) to ( 7 ). Figure 3: Laplace equivalent impedance of the bridged-T network Y_{1}=\frac{1}{SL_{1}+\frac{L_{3}(1+\frac{L_{1}}{L_{2}})}{1+S^{2}C_{2}L_{3}}} (5) Y_{2}=\frac{1}{SL_{2}+\frac{L_{3}(1+\frac{L_{2}}{L_{1}})}{1+S^{2}C_{2}L_{3}}} (6) Y_{3}=\frac{1}{\frac{1}{SC_{1}}+S(L_{1}+L_{2})+L_{1}L_{2}(\frac{S}{L_{3}}+S^{3}C_{2})} (7) According to [ 15 ] , a transmission (or ABCD or T for short) matrix as equated in equation ( 8 ) can be directly derived from the admittances in a \Pi network. In this equation, A, B, C, and, D are the T matrix’s components and can be calculated through the converting equations ( 9 ) to ( 12 ). \begin{bmatrix}V_{1}\\ I_{1}\end{bmatrix}=\begin{bmatrix}A&B\\ C&D\end{bmatrix}\begin{bmatrix}V_{2}\\ I_{2}\\ \end{bmatrix} (8) A=1+\frac{Y_{2}}{Y_{3}} (9) B=\frac{1}{Y_{3}} (10) C=Y_{1}+Y_{2}+\frac{Y_{1}Y_{2}}{Y_{3}} (11) D=1+\frac{Y_{1}}{Y_{3}} (12) In accordance with [ 16 ] , the conversion of the T matrix to the S matrix can be achieved using the following set of conversion formulas equated by equations ( 13 ) to ( 16 ). In these equations, Z_{0} represents the characteristic impedance of a typical transmission line. \displaystyle S_{11} \displaystyle=\frac{A+B/Z_{o}-CZ_{o}-D}{A+B/Z_{o}+CZ_{o}+D} (13) \displaystyle S_{12} \displaystyle=\frac{2(AD-BC)}{A+B/Z_{o}+CZ_{o}+D} (14) \displaystyle S_{21} \displaystyle=\frac{2}{A+B/Z_{o}+CZ_{o}+D} (15) \displaystyle S_{22} \displaystyle=\frac{-A+B/Z_{o}-CZ_{o}+D}{A+B/Z_{o}+CZ_{o}+D} (16) In the process of microstrip filter design, the parameters S21 and S11 assume considerable significance. Accordingly, we embark on the computation of the canonical forms of their respective transfer functions. To this end, the substitution of equations ( 9 ) through ( 12 ) into equations ( 13 ) through ( 16 ), followed by necessary simplifications, results in the formulation of a simplified version of the S11 transfer function, denoted as equation 17 . \displaystyle S_{11} \displaystyle=\frac{N_{0}+N_{1}S+N_{2}S^{2}+N_{3}S^{3}+N_{4}S^{4}}{D_{0}+D_{1}S+D_{2}S^{2}+D_{3}S^{3}+D_{4}S^{4}+D_{5}S^{5}} (17) where coefficients N_{0} , N_{1} , N_{2} , N_{3} , N_{4} , D_{0} , D_{1} , D_{2} , D_{3} , D_{4} , and D_{5} are as follows: \displaystyle N_{0} \displaystyle=C_{1}L_{3}Z_{0}^{2} (18) \displaystyle N_{1} \displaystyle=C_{1}L_{3}Z_{0}(L_{1}-L_{2}) \displaystyle N_{2} \displaystyle=(C_{1}-L_{3}Z_{0}^{2})(L_{1}+L_{2})+C_{1}(L_{1}L_{2}L_{3}-C_{2}Z_{0}^{2}) \displaystyle N_{3} \displaystyle=C_{1}C_{2}Z_{0}(L_{1}-L_{2}) \displaystyle N_{4} \displaystyle=C_{2}(C_{1}L_{1}L_{2}-Z_{0}^{2}(L_{1}+L_{2})) \displaystyle D_{0} \displaystyle=C_{1}L_{3}Z_{0}^{2} \displaystyle D_{1} \displaystyle=C_{1}Z_{0}(2+L_{3}(L_{1}+L_{2})) \displaystyle D_{2} \displaystyle=(C_{1}+L_{3}Z_{0}^{2})(L_{1}+L_{2})+C_{1}(L_{1}L_{2}L_{3}+C_{2}Z_{0}^{2}) \displaystyle D_{3} \displaystyle=((2+C_{1}C_{2})(L_{1}+L_{2})+2L_{1}L_{2}L_{3})Z_{0} \displaystyle D_{4} \displaystyle=C_{2}(C_{1}L_{1}L_{2}+Z_{0}^{2}(L_{1}+L_{2})) \displaystyle D_{5} \displaystyle=2L_{1}L_{2}C_{2}Z_{0} Similarly, the simplified version of the S21 transfer function is expressed by equation 19 . \displaystyle S_{21} \displaystyle=\frac{N^{\prime}_{1}S+N^{\prime}_{3}S^{3}+N^{\prime}_{5}S^{5}}{D_{0}+D_{1}S+D_{2}S^{2}+D_{3}S^{3}+D_{4}S^{4}+D_{5}S^{5}} (19) where coefficients N^{\prime}_{1} , N^{\prime}_{3} , and N^{\prime}_{5} are: \displaystyle N^{\prime}_{1} \displaystyle=2C_{1}Z_{0} (20) \displaystyle N^{\prime}_{3} \displaystyle=2Z_{0}(L_{1}+L_{2}+L_{1}L_{2}L_{3}) \displaystyle N^{\prime}_{5} \displaystyle=2C_{2}L_{1}L_{2}Z_{0} Let’s say that the complex frequency, denoted as S , is equal to j\omega , where \omega is the angular frequency. Additionally, in the design of a filter, the normalized angular frequency, denoted as \Omega , is defined as the ratio of the angular frequency ( \omega ) to the cut-off angular frequency ( \omega_{c} ). With these definitions in place, the transfer functions of S11 and S21, as given by equations ( 17 ) and ( 19 ), can be reformulated in a normalized and complex form as follows: \displaystyle S_{11} \displaystyle=\frac{\alpha_{N}+j\beta_{N}}{\alpha_{D}+j\beta_{D}} (21) where the coefficients \alpha_{N} , \beta_{N} , \alpha_{D} , and \beta_{D} are obtained through the following parametric expressions: \displaystyle\alpha_{N} \displaystyle=N_{0}-N_{2}\omega_{c}^{2}\Omega^{2}+N_{4}\omega_{c}^{4}\Omega^{4} (22) \displaystyle\beta_{N} \displaystyle=N_{1}\omega_{c}\Omega-N_{3}\omega_{c}^{3}\Omega^{3} \displaystyle\alpha_{D} \displaystyle=D_{0}-D_{2}\omega_{c}^{2}\Omega^{2}+D_{4}\omega_{c}^{4}\Omega^{4} \displaystyle\beta_{D} \displaystyle=D_{1}\omega_{c}\Omega-D_{3}\omega_{c}^{3}\Omega^{3}+D_{5}\omega_{c}^{5}\Omega^{5} By using Equation ( 21 ), both the magnitude and phase of S11 can be calculated as follows: \displaystyle\left|S_{11}\right| \displaystyle=\sqrt{\frac{(\alpha_{N})^{2}+(\beta_{N})^{2}}{(\alpha_{D})^{2}+(\beta_{D})^{2}}} (23) \displaystyle\angle S_{11} \displaystyle=\tan^{-1}(\frac{\beta_{N}}{\alpha_{N}})-\tan^{-1}(\frac{\beta_{D}}{\alpha_{D}}) (24) In a similar manner, after normalizing the frequency and applying some simplifications, the complex

Read the complete text